Abstract
The methods of mathematical simulation are used to study the process of contact friction interaction for homogeneous lead and heterogeneous intact or run-in B16 babbitt. It is shown that the hard and soft structural components of the run-in babbitt strongly decrease the size of the zones of plastic deformation in the material, improve its wear resistance, and promote the increase in the operating reliability and service life of plain bearings.
Similar content being viewed by others
References
V. D. Belousov, Durability of Machine Parts with Composite Materials [in Russian], Vyshcha Shkola, Lvov (1984).
I. V. Kragel’skii, M. N. Dobychin, and V. S. Kombalov, Foundations of Friction and Wear Analyses [in Russian], Mashinostroenie, Moscow (1977).
I. G. Goryacheva, Mechanics of Friction Interaction [in Russian], Nauka, Moscow (2001).
I. G. Goryacheva and M. N. Dobychin, Contact Problems in Tribology [in Russian], Mashinostroenie, Moscow (1988).
A. E. Andreikiv and M. V. Chernets, Analysis of the Contact Interaction of Machine Parts with Friction [in Russian], Naukova Dumka, Kiev (1991).
Ya. Burak, M. Kuzin, and O. Kuzin, “Technological improvement of the wear resistance of plain bearings by optimizing the structural parameters of metal systems in contact,” Mashynoznavstvo, No. 2, 38–43 (2006).
A. A. Alyamovskii, SolidWorks/COSMOSWorks. Engineering Analysis by the Finite-Element Method [in Russian], DMK Press, Moscow (2004).
Yu. P. Solntsev, E. I. Pryakhin, and F. Voitkun, Materials Science. A Handbook for Institutes of Higher Education [in Russian], MISIS, Moscow (1999).
Author information
Authors and Affiliations
Additional information
__________
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 6, pp. 27–30, November–December, 2007.
Rights and permissions
About this article
Cite this article
Burak, Y.I., Kuzin, M.O. Influence of the structure of babbitt on the stress-strain state in the zone of friction contact. Mater Sci 43, 780–783 (2007). https://doi.org/10.1007/s11003-008-9022-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-008-9022-1