Abstract
The ordering of stacking-disordered silicon carbide prepared from the elements by high energy ball milling was investigated during sintering. A sharp increase in density in the temperature region 1700–1800°C was associated with a decrease in the disorder. Samples which had low disorder density showed a more continuous sintering behavior with temperature. Highly dense (up to 99% relative density) SiC can be obtained at 1900°C under a pressure of 70 MPa with no hold time. Similar results were observed for structurally disordered carbon with 10 at% of boron. The sintering behavior exhibited an abrupt density increase in the narrow temperature region of 1450–1600°C and was associated with disorder-order transformation.
Similar content being viewed by others
References
J. N. MERRETT, T. ISAACS-SMITH, D. C. SHERIDAN and J. R. WILLIAMS, J. Electron. Mater. 31 (2002) 635.
D. C. SHERIDAN, G. NIU and J. D. CRESSLER, Solid State Electron. 45 (2001) 1659.
H. INAI, Y. SATOH, Y. OKAMOTO and J. MORIMOTO, J. Adv. Sci. 11 (1999) 188.
R. KUMMER, C. HECHT and A. WINNACKER, Optics Lett. 22 (1997) 916.
T. DALIBOR, G. PENSL, N. NORDELL and A. SCHONER, Phys. Rev. B 55 (1997) 13618.
K. YAMADA and M. MOHRI, in Silicon Carbide Ceramics-1, edited by S. Somiya and Y. Inomata (Elsevier, NY, 1991).
A. TAVASSOLI, J. Nucl. Mater. 302 (2002) 73.
T. YANO, M. AKIYOSHI, K. ICHIKAWA, Y. TACHI and T. ISEKI, ibid. 289 (2002) 73.
H. L. HEINISCH, L. R. GREENWOOD, W. J. WEBER and R. E. WILLIFORD, ibid. 307–311 (2002) 895.
L. L. SNEAD, R. H. JONES, A. KOHYAMA and P. FENICI, ibid. 233–237 (1996) 26.
E. FITZER and M. HEYM, High Temp.-High Press. 10 (1978) 29.
Y. KUGA, M. SHIRAHIGE, T. FUJIMOTO, Y. OHIRA and A. UEDA, Carbon 42 (2004) 293.
C. SAUDER, J. LAMON and R. PAILLER, ibid. 42 (2004) 715.
A. MIRHABIBI, B. RAND, S. BAGHSHAHI and R. AGHA BABA ZADEH, ibid. 41 (2003) 1593.
M. KOYAMA, H. HATTA and H. FUKUDA, ibid. 43 (2005) 171.
R. BACON, J. App. Phys. 31 (1960) 283.
J. L. PIERCE, L. P. ZAWADA and R. SRINIVASAN, J. Mater. Engin. Perform. 12 (2003) 354.
M. MITOMO, Y. W. KIM and H. HIROTSURU, J. Mater. Res. 11 (1996) 1601.
Y. SHINODA, T. NAGANO and F. WAKAI, J. Amer. Ceram. Soc. 82 (1999) 771.
R. VA βEN, A. KAISER, J. FORSTER, H. P. BUCHKRENER and D. STOVER, J. Mater. Sci. 31 (1996) 3623.
B. FATHOLLAHI, B. JONES, P. C. CHAU and J. L. WHITE, Carbon 43 (2005) 125.
Idem., ibid.43 (2005) 135.
Idem., ibid.43 (2005) 143.
M. OHAYANGI, T. YAMAMOTO, H. KITAURA, K. SHIRAI and Z. A. MUNIR, Advances in Science and Technology (Faenza, Italy): 10th International Ceramics Congress 2002, 31[Part B], 175–182 (2003).
M. OHYANAGI, T. YAMAMOTO, H. KITAURA, Y. KODERA, T. ISHII and Z. A. MUNIR, Scripta Mater. 50 (2004) 111.
T. YAMAMOTO, H. KITAURA, Y. KODERA, T. ISHII, M. OHYANAGI and Z. A. MUNIR, J. Am. Ceram. Soc. 87 (2004) 1436.
T. YAMAMOTO, T. ISHII, Y. KODERA, H. KITAURA, M. OHYANAGI and Z. A. MUNIR, J. Ceram. Soc. Jpn., Supplement 112-1, PacRim5 Special Issue 115 (2004) S940.
U. ANSELMI-TAMBURINI, Z. A. MUNIR, Y. KODERA, T. IMAI and M. OHYANAGI, J. Amer. Ceram. Soc. 88 (2005) 1382.
K. SZULZEWSKY, C. OLSCHEWSKI, I. KOSCHE, D. H. KLOTZ and R. MACH, Nanostructured Mater. 6 (1995) 325.
B. PALOSZ, S. GIERLOTKA, S. STELMAKH, R. PIELASZEK, P. ZINN, M. WINZENICK, U. BISMAYER and H. BOYSEN, J. Alloys Compounds 286 (1999) 184.
V. V. PUJAR and J. D. CAWLEY, J. Am. Ceram. Soc. 80 (1997) 1653.
Idem., ibid.84 (2001) 2645.
T. OCHIA I. S. TAKANAGA and M. OHYANAGI, “Method of manufacturing graphite particle and refractory using the method”, US Patent 0126306 A1.
A. OYA, R. YAMASHITA and S. OTANI, High Temp.-High Press. 10 (1978) 511.
W. S. SEO, C. H. PAI, K. KOUMOTO and H. YANAGIDA, J. Ceram. Soc, Jpn. 99 (1991) 443.
M. SOMMER, W. D. SCHUBERT, E. ZOBETZ and P. WARBICHLER, Int. J. Refract. Hard Metals 20 (2002) 41.
Y. V. KORNYUSHIN and S. P. OSHKADYOROV, Sci. Sintering 20 (1988) 97.
H. HASHIMOTO, H. SHIBAYAMA, H. MASAKI and H. ISHIKAWA, J. Electrochem. Soc. 123 (1976) 1899.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kodera, Y., Yamamoto, T., Toyofuku, N. et al. Role of disorder-order transformation in consolidation of ceramics. J Mater Sci 41, 727–732 (2006). https://doi.org/10.1007/s10853-006-6501-3
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-6501-3