Abstract
In the present work, investigation of the functional property of piezoelectric graded monomorph actuator systems is presented. The functional graded actuators were fabricated by electrophoretic deposition (EPD) using pure PZT and doped PZT materials. Actuators developed have shown gradual gradient variation in microstructure. It is noted that the trend in microstructural gradient does not represent similar trend in piezoelectric property gradient. The displacement of microstructural graded and both piezoelectric and microstructural graded actuators were measured in the static condition. The latter was also measured under dynamic condition. The results show that the proper gradient distribution of the piezoelectric properties is important to improve the electromechanical performance of the actuator.
Similar content being viewed by others
References
Jones DJ, Prasad SE, Wallace JB (1996) Key Eng Mat 122–124:71
Uchino K (1993) MRS Bulletin 42
Niezrechi C, Brei D, Moskalik A (2001) The Shock and Vibration Digest 33:269
Uchino K (1998) Smart Mater Struct 7:273
Uchino K (1997) In: Tuller HL (eds). Piezoelectric Actuators and Ultrasonic Motors. Kluwer Academic Publishers, Boston, p. 140
Smits JG, Dalke SI, Cooney TK (1991) Sensors and Actuators A 28:41
Zhu XH, Meng ZY (1995) Sensors and Actuators A 48:169
Wu CCM, Kahn M, Moy W (1996) J Am Ceram Soc 79:809
Chen YH, Li T, Ma J (2003) J Mater Sci 38:2803
Nagai M, Yamashita Y, Takuma Y (1993) J Am Ceram Soc 76:153
Ferrari B, Moreno R (1997) J Eur Ceram Soc 17:549
Sarkar P, Huang X, Nicholson PS (1992) J Am Ceram Soc 75:2907
de Silva CW (1999) Vibration: fundamentals and practice. CRC Press, Boca Raton, p. 299
Kouvatov A, Steinhausen R, Langhammer HT (1999) J Eur Ceram Soc 19:1153
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, Y.H., Li, T. & Ma, J. Development of piezoelectric monomorph actuator using electrophoretic deposition. J Mater Sci 41, 8079–8085 (2006). https://doi.org/10.1007/s10853-006-0015-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-0015-x