The paper proposes a method for calculating the kinematic parameters (acceleration, speed, and displacement) and inertial losses of a liquid piston head in the profiled working chamber of the second stage of a piston hybrid energy-generating machine (PHEM). The working chamber is formed by two rotating truncated cones. Using a continuity equation of fluid flow in the machine, a general expression is obtained for determining the acceleration of the surface layer of the liquid piston when changing the geometry of the working chamber. The solution is reduced to an analytical form. The numerical experiment made it possible to evaluate the effect of changing the geometry of the working chamber on the kinematic parameters of the liquid piston and inertial head losses in the working chamber of the second stage of the PHEM.
Similar content being viewed by others
References
V. E. Shcherba, A. P. Bolshtyanskii, S. Yu. Kaigorodov, and D. A. Kuzeeva, “Benefits of integrating displacement pumps and compressors,” Russ. Eng. Res., 36, No. 3, 174–178 (2016).
V. E. Shcherba, A. P. Bolshtyanskii, V. V. Shalai, and E. V. Khodyreva, Pump-and-Compressor Units. Operating Processes and Design Basics [in Russian], Mashinostroenie, Moscow (2013).
A. V. Zanin, V. E. Shcherba, A. P. Bolshtyanskii, et al., Method of Piston Two-Stage Compressor Operation and Device for Implementation Thereof, Apl. RU2019129327, IPC F04B25/00, F04B25/02, Apl. Filed by OmSTU (Sep 18, 2019).
A. V. Zanin, V. E. Shcherba, E. Yu. Nosov, et al., “Development and study of an experimental sample of a positive displacement two-stage piston hybrid energy-generating machine,” Din. Sist. Mekh. Mash., 7, No. 1, 54–61 (2019).
V. E. Shcherba, A. V. Zanin, E.Yu. Nosov, et al., “Calculation of compression and discharge processes for a two-stage liquid piston hybrid energy-generating machine,” Khim. Neftegaz. Mashinostr., No. 8, 15–20 (2019).
V. E. Shcherba, A. V. Zanin, and S. F. Khrapskii, “Fluid motion dynamics in a two-stage piston hybrid energy-generating machine,” Khim. Neftegaz. Mashinostr., No. 7, 13–17 (2020).
V. N. Martynov, Development and Study of Pump-and-Compressor Units for Compressing Gases and Gas-Liquid Mixtures [in Russian], abstract, Cand. Diss. Eng., Moscow (2009).
V. E. Shcherba, V. V. Shalai, N. V. Pustovoi, and A. V. Zanin, “Profiling of the second-stage chamber in a positive displacement piston hybrid energy-generating machine,” Khim. Neftegaz. Mashinostr., No. 2, 26–31 (2020).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 56, No. 9, pp. 22−25, September, 2020.
Rights and permissions
About this article
Cite this article
Shcherba, V.E., Zanin, A.V., Nosov, E.Y. et al. Calculation of Liquid Piston Kinematic Parameters and Inertial Losses in the Profiled Second-Stage Working Chamber of a Piston Hybrid Energy-Generating Machine. Chem Petrol Eng 56, 726–735 (2021). https://doi.org/10.1007/s10556-021-00835-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-021-00835-x