Sulfur- and chlorine-containing products are obtained by reacting C10 α -olefins with sulfur monochloride. By sulfidation of the resulting reaction mixture with saturated aqueous sodium sulfide solution sulfur-containing products are synthesized. The optimum conditions are determined for synthesis of these products, which can be recommended as additives that improve tribological properties of lubricants. It is shown that specimens of mineral oils prepared by using the synthesized additives correspond in key performance properties to transmission oils TM-4, SAE, 80W-90, and API-type oil GL-4 with improved anti-scoring properties.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
A. B. Vipper, A. B. Vilenkin, and D. A. Gaisner, Foreign Oils and Additives [in Russian], Khimiya, Moscow (1981) 187 p.
A. M. Kuliev, Chemistry and Technology of Oil and Fuel Additives, Khimiya, Leningrad (1985) 312 p.
3. Pat. 2563231 (Fr).
Yu. V. Popov, Ya. L. Uskach, S. M. Ledenev, et al., Zh. Prikl. Khim., 85, 1262-1264 (2012).
Yu. V. Popov, Ya. L. Uskach, S. M. Ledenev, et al., Khim. Tekhnol. Topl. Masel, No. 3, 17-19 (2014).
V. A. Al’fonsov, L. I. Belen’kii, N. N. Vlasova, et al., Preparation and Properties of Organic Sulfur Compounds, Khimiya, Moscow (1998) 560 p.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 4, pp. 16 – 17, July – August, 2016.
Rights and permissions
About this article
Cite this article
Popov, Y.V., Ledenev, S.M., Tokmacheva, N.Y. et al. Anti-Scoring Additives for Transmission Oils Based on C10 α−Olefin Fraction. Chem Technol Fuels Oils 52, 377–380 (2016). https://doi.org/10.1007/s10553-016-0718-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10553-016-0718-x