Abstract
A servo-controlled testing setup was used to investigate the stress–strain behaviour of three carbonate rocks into the post-failure region. A series of uniaxial and triaxial tests on Indiana limestone, Carrara marble, and Toral de Los Vados limestone have been performed, gathering information on the evolution of the strength parameters and stiffness of these rocks, as well as on their post-yield dilatational properties. The Carrara marble was found to be extremely ductile, even under uniaxial conditions, whereas the Indiana limestone and Toral de Los Vados limestone were more brittle. The Indiana limestone, which was the weakest rock tested, showed a notable transition to more ductile failure modes, even at modest confinements on the order of 10 MPa; this transition was reflected in the volumetric strain evolution of the rock in the form of a transition of the dilation angle towards lower, less variable values. All of the rocks tested were found to be consistent with a cohesion-weakening-friction-strengthening model for yield, with the peak friction angle of both the Carrara marble and Indiana limestone being attained after peak strength. The evolution of stiffness was also considered as a function of accumulated plastic strain. Each rock decreased in stiffness significantly following the onset of yield, and eventually reached a near-constant residual stiffness on the order of 50 % of the initial elastic stiffness.
Similar content being viewed by others
References
Alejano LR, Alonso E (2005) Considerations of the dilatancy angle in rocks and rock masses. Int J Rock Mech Min Sci 42:481–507
Alonso E, Alejano LR, Varas F, Fdez-Manin G, Carranza-Torres C (2003) Ground reaction curves for tunnels in strain-softening rock masses. Int J Numer Anal Meth Geomech 27:1153–1185
Archambault G, Roleau A, Daigneault R, Flamand R (1993) Progressive failure of rock masses by a self-similar anastomosing process of rupture at all scales and its scale effects on their shear strength. The Second International Workshop on Scale Effects in Rock Masses, Lisbon, pp 133–141
Arzúa J, Alejano LR (2013) Dilation in granite according to servo-controlled strength tests. Int J Rock Mech Min Sci 61:43–56
Arzúa J, Alejano LR, Walton G (2014) Strength and dilation of jointed granite specimens in servo-controlled triaxial tests. Int J Rock Mech Min Sci 69:93–104
Besuelle P, Rudnicki JW (2004) Localization: Shear bands and compaction bands. Mechanics of fluid-saturated rocks. Elsevier, Boston, pp 219–321
Brace WF, Paulding BW, Scholz C (1966) Dilatancy in the fracture of crystalline rocks. J Geophys Res 71(16):3939–3953
Cargill JS, Shakoor A (1990) Evaluation of empirical methods for measuring the uniaxial compressive strength of rock. Int J Rock Mech Min Sci Geomech Abstr 27(6):495–503
Chandler NA (2013) Quantifying long-term strength and rock damage properties from plots of shear strain versus volume strain. Int J Rock Mech Min Sci 59:105–110
Cipullo A, White W, Lee IK (1985) Computer controlled volumetric strain measurements in metadolerite. Bull Eng Geol Environ 32(1):55–65
Corkum AG, Lorig LJ, DeGagne DO (2012) Continuum representation of brittle rock failure bulking-induced displacements around tunnels. In: 46th ARMA Rock Mechanics/Geomechanis Symposium, Chicago, Illinois
Crouch SL (1970) Experimental determination of volumetric strain in failed rock. Int J Rock Mech Min Sci Geomech Abstr 7(4):231–241
Diederichs MS (1999) Instability of hard rockmasses: the role of tensile damage and relaxation (Unpublished PhD). University of Waterloo, Waterloo
Diederichs MS (2003) Rock fracture and collapse under low confinement conditions. Rock Mech Rock Eng 36:339–381
Diederichs MS, Martin CD (2010) Measurement of spalling parameters from laboratory testing. In: Zhao, Labiouse, Dudt, Mathier (eds) Rock mechanics in civil and environmental engineering. Taylor & Francis Group, London
Diederichs MS, Kaiser PK, Eberhardt E (2004) Damage initiation and propagation in hard rock during tunnelling and the influence of near-face stress rotation. Int J Rock Mech Min Sci 41:785–812
Diederichs M, Damjanac B, Jensen M, Lam T, Martin D, McCreath D (2013) Ultra-long-term geomechanics design for a deep geological repository in sedimentary rock. In: 47th US Rock Mechanics/Geomechanics Symposium, San Francisco
Dunham RJ (1962) Classification of carbonate rocks according to depositional texture. Am Assoc Pet Geol Mem 1:108–121
Edmond JM, Paterson MS (1972) Volume changes during the deformation of rocks at high pressures. Int J Rock Mech Min Sci 9:161–182
Elliot GM, Brown ET (1985) Yield of a soft, high porosity rock. Geotechnique 35(4):413–423
Farmer I (1983) Engineering behaviour of rocks, 2nd edn. Chapman and Hall, New York
Fredrich JT, Evans B, Wong T (1989) Micromechanics of the brittle to plastic transition in Carrara marble. J Geophys Res 94:4129–4145
Fredrich JT, Evans B, Wong T (1990) Effect of grain size on brittle and semibrittle strength: implications for micromechanical modelling of failure in compression. J Geophys Res 95:10907–10920
Griggs DT, Turner FJ, Heard HC (1960) Deformation of rocks at 500 to 800 degrees C. Geol Soc Am Mem 79:39–104
Hajiabdolmajid V, Kaiser PK, Martin CD (2002) Modelling brittle failure of rock. Int J Rock Mech Min Sci 39:431–741
Hart DJ, Wang HF (1995) Laboratory measurements of a complete set of poroelastic moduli for Berea sandstone and Indiana limestone. J Geophys Res 100:17741–17751
Hill JR (2013) Indiana limestone. Retrieved 08/01/2013 from http://igs.indiana.edu/MineralResources/Limestone.cfm
Hoagland RG, Hahn GT, Rosenfield AR (1973) Influence of microstructure on fracture propagation in rock. Rock Mech 5:77–106
Hoek E, Carranza-Torres C, Corkum B (2002) Hoek-brown failure criterion—2002 edition. N Am Rock Mech Soc Meet:267–273
Howarth DF, Rowlands JC (1987) Quantitative assessment of rock texture and correlation with drillability and strength properties. Rock Mech Rock Eng 20:57–85
Hudson JA, Brown ET, Fairhurst C (1971) Optimizing the control of rock failure in servo-controlled laboratory tests. Rock Mech 3(4):217–224
Itasca Consulting Group (2011) FLAC Version 7.0—theory and Background (5th edn), Minneapolis, Minnesota
Ji Y, Baud P, Wong T (2012) Characterization of pore geometry of indiana limestone in relation to mechanical compaction. Oil Gas Sci Technol 67(5):753–775
Labuz JF, Biolzi L (1991) Class I vs. class II stability: a demonstration of size effect. Int J Rock Mech Min Sci 28:199–205
Lajtai EZ (1998) Microscopic fracture processes in a granite. Rock Mech Rock Eng 31(4):237–250
Loew S, Ziegler H, Keller F (2000) ALPTRANSIT: Engineering geology of the world’s longest tunnel system. In: GeoEng2000, an International Conference on Geotechnical and Geological Engineering, Melbourne, vol 1, pp 927–937
Martin CD (1997) Seventeenth Canadian geotechnical colloquium: the effect of cohesion loss and stress path on brittle rock strength. Can Geotech J 34:698–725
Martin CD, Chandler NA (1994) The progressive fracture of lac du bonnet granite. Int J Rock Mech Min Sci Geomech Abstr 31:643–659
Medhurst TP (1996) Estimation of the in situ and deformability of coal for engineering design, Ph.D. Thesis, University of Queensland
Medhurst TP, Brown ET (1998) A study of the mechanical behaviour of coal for pillar design. Int J Rock Mech Min Sci 35(8):1087–1105
Mogi K (1966) Pressure dependence of rock strength and transition from brittle fracture to ductile flow. Bull Earthq Res Inst 44:215–232
Nuclear Waste Management Organization (NWMO) (2013) About the DGR. Retrieved 08/01/2013, from http://www.nwmo.ca/dgr
Olsson WA (1974) Grain size dependence of yield stress in marble. J Geophys Res 79(32):4859–4862
Ord A (1991) Deformation of rock: a pressure-sensitive, dilatant material. Pure appl Geophys 137:337–366
Peck L, Barton CC, Gordon RB (1985) Microstructure and the resistance of rock to tensile fracture. J Geophys Res 90:1533–1546
Price AM, Farmer IW (1979) Application of yield models to rock. Int J Rock Mech Min Sci Geomech Abstr 16:157–159
Ramamurthy T (2001) Shear strength response of some geological materials in triaxial compression. Int J Rock Mech Min Sci 38:683–697
Read HE, Hegemeier GA (1984) Strain softening of rock, soil and concrete—a review article. Mech Materials 3:271–294
Riedel JJ, Labuz JF (2007) Propagation of a shear band in sandstone. Int J Numer Anal Meth Geomech 31:1281–1299
Robinson RH (1959) The effect of pore and confining pressure on the failure process in sedimentary rocks. Colorado Sch Mines Q 54:177–199
Rummel F, Fairhurst C (1970) Determination of the post-failure behaviour of brittle rock using a servo-controlled testing machine. Rock Mech Rock Eng 2(4):189–204
Schmertmann JH, Osterberg JO (1960) An experimental study of the development of cohesion and friction with axial strain in saturated cohesive soils. In: Research Conference on Shear Strength of Cohesive Soils, Boulder, CO, pp 643–694
Schmidt RA, Huddle CW (1977) Effect of confining pressure on fracture toughness of indiana limestone. Int J Rock Mech Min Sci Geomech Abstr 14:289–293
Singh AB (1997) Study of rock fracture by permeability method. J Geotech Geoenviron Eng 123(7):601–608
Sture S, Ko HY (1978) Strain-softening of brittle geologic materials. Int J Numer Anal Meth Geomech 2:237–253
Turner FJ, Griggs DT, Heard HC (1954) Experimental deformation of calcite crystals. Geol Soc Am Bull 65:883–934
Vajdova V, Baud P, Wong T (2004) Compaction, dilatancy, and failure in porous carbonate rocks. J Geophys Res 109
Varas F, Alonso E, Alejano LR, Fdez.-Manin G (2005) Study of bifurcation in the problem of unloading a circular excavation in a strain-softening material. Tunn Undergr Space Technol 20:311–322
Vardoulakis I, Sulem J (1995) Birfurcation analysis in geomechanics. Blackie, Glasgow
Vermeer PA, de Borst R (1984) Non-associated plasticity for soils, concrete, and rock. Heron 29(3)
Walton G, Diederichs MS, Arzúa J (2014) A detailed look at pre-peak dilatancy in a granite—determining “plastic” strains from laboratory test data. Eurock 2014, Vigo, Spain
Wawersik WR (1975) Technique and apparatus for strain measurements on rock in constant confining pressure experiments. Rock Mech 7(4):231–241
Wawersik WR, Brace WF (1971) Post-failure behaviour of a granite and diabase. Rock Mech 3(2):61–85
Wawersik WR, Fairhurst C (1970) A study of brittle rock fracture in laboratory compression experiments. Int J Rock Mech Min Sci 7(5):561–564
Zhao XG, Cai M (2010) A mobilized dilation angle model for rocks. Int J Rock Mech Min Sci 47:368–384
Zhao XG, Cai M, Cai M (2010) Considerations of rock dilation on modeling failure and deformation of hard rocks—a case study of the mine-by test tunnel in Canada. J Rock Mech Geotech Eng 2:338–349
Zheng Z, Cook NGW, Myer LR (1989) Stress induced microcrack geometry at failure in unconfined and confined axial compressive tests. US Rock Mech Symp 30:749–756
Acknowledgments
The authors would like to acknowledge the significant contributions of the Natural Resources Canada CANMET laboratory in Ottawa in preparing the Indiana Limestone samples for testing. We would also like to thank the Nuclear Waste Management Organization of Canada and the Spanish Ministry of Science and Technology for their financial support, without which this work would not have been possible.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Walton, G., Arzúa, J., Alejano, L.R. et al. A Laboratory-Testing-Based Study on the Strength, Deformability, and Dilatancy of Carbonate Rocks at Low Confinement. Rock Mech Rock Eng 48, 941–958 (2015). https://doi.org/10.1007/s00603-014-0631-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-014-0631-8