Abstract
The re-use of rock as an industrial material requires more treatments than those foreseen for the reuse of muck as an aggregate for concrete and for road construction. The treatments always start with comminution, which has the goal of liberating the rock-forming minerals. Liberation is achieved with the appearance of grains which are composed of only one mineral. The subsequent treatment steps are based on the physical–mechanical–chemical properties of the different minerals, that is, density, magnetic susceptibility, wettability etc. Magnetic separation and flotation, the two techniques examined in this research, are the two most common techniques used in industrial mineral production plants. The mucks that were analysed are from the Omegna and Brennero tunnels, both of which are granitic rocks with different textures. From the analysis and comparison of the preliminary treatment results, it has been possible to optimise the treatment method. Petrographic, mineralogic and firing tests have been conducted to evaluate the obtained results. High-gradient magnetic separation (HGMS) on defined grain sizes appears to be suitable to obtain a product with a high feldspar–quartz content which could be used in the ceramic field.
Similar content being viewed by others
References
Bertolotti GP, Bredy A, Clerici C, Rossetti P, Sassone P (2003) Studio geominerario e mineralurgico di una miniera di Feldspato nell’area Masserano—Santa Liberata (BI). In: GEAM, Marzo-Giugno, pp 5–12
Clerici C (2002) Lecture notes of the course “Recovery of secondary raw materials”
Koh PTL, Schwarz MP (2006) CFD model of a self-aerating flotation cell. In: Fifth International Conference on CFD in the Process Industries, CSIRO, Melbourne, Australia, 13–15 December 2006
Oberteuffer JA (1974) Magnetic separation: a review of principles, devices, and applications. IEEE Trans Mag 10(2):223–228
Tealdi C (2009) Metodologie di prova per la caratterizzazione e il riuso del marino di galleria: il caso della galleria Bocciol—s.r. 229 variante di Omegna—Tesi di laurea—Politecnico di Torino
Acknowledgments
This research has been possible thanks to the collaboration of BBT and ARES PIEMONTE, who supplied the materials used to conduct the tests, and to the scientific guidance of Professor Clerici.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Marini, P., Bellopede, R. The Use of Tunnel Muck as Industrial Raw Material: Two Case-Studies. Rock Mech Rock Eng 46, 397–404 (2013). https://doi.org/10.1007/s00603-012-0266-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-012-0266-6