Abstract
The surface quality of microstructures greatly affects their performance. Electropolishing has many advantages as a technique for eliminating surface defects of microstructures and components. This paper presents a new electropolishing method to improve the surface quality of microgrooves. A wire with a diameter in the micrometer range is employed as the cathode. The whole of the microgroove is polished by moving this wire electrode along the outline of the microgroove. The anodic dissolution behaviors of a cobalt-based alloy in phosphoric acid solutions with various concentrations are investigated using polarization curves. The effects of the wire electropolishing parameters, namely, the wire electrode diameter, feed rate, polishing gap, applied voltage, pulse period, and duty cycle are also studied both theoretically and experimentally. Using optimized values of these parameters, the surface roughness of the microgroove is reduced from Ra = 0.3 to 0.036 μm. A mirror-like surface is obtained after polishing.
Similar content being viewed by others
References
Wang FY, Zhang H, Liang X, Gong F, Ma J (2016) Fabrication of metallic glass micro grooves by thermoplastic forming. J Micromech Microeng 27(2):025009
Chen CC, Li JZ, Zhan SC, Yu ZY, Xu WJ (2016) Study of micro groove machining by micro ECM. Proc CIRP 42:418–422. https://doi.org/10.1016/j.procir.2016.02.224
Ahmed N, Alahmari AM, Darwish S, Naveed M (2016) Laser beam micro-milling of nickel alloy: dimensional variations and RSM optimization of laser parameters. Appl Phys A–Mater 122(12):1025. https://doi.org/10.1007/s00339-016-0553-2
Yeo SH, Murali M (2002) A new technique using foil electrodes for the electro-discharge machining of micro grooves. J Micromech Microeng 13(1):N1
Yi F, Zhang J, Xie C, Wang D, Chen D (2006) Activities of LIGA and Nano LIGA Technologies at BSRF. J Phys Conf Ser 34:865–869. https://doi.org/10.1088/1742-6596/34/1/143
Pong-Ryol J, Tae-Sok J, Nam-Chol K, Xing F, Ji KH (2016) Laser micro-polishing for metallic surface using UV nano-second pulse laser and CW laser. Int J Advan Manuf Technol 85(9–12):2367–2375. https://doi.org/10.1007/s00170-015-7992-3
Tsai FC, Ke JH (2013) Abrasive jet polishing of micro-channels using compound SiC abrasives with compound additives. Int J Advan Manuf Technol 67(5–8):1151–1159. https://doi.org/10.1007/s00170-012-4555-8
Guo J, Liu K, Wang Z, Guan LT (2017) Magnetic field-assisted finishing of a mold insert with curved microstructured surface for injection molding of microfluidic chips. Tribol Int 114:306–314. https://doi.org/10.1016/j.triboint.2017.04.019
Kim SH, Choi SG, Choi WK, Lee ES (2015) A study of the improvement surface roughness and optimum machining characteristic of L-shaped tube STS 316L by electropolishing. Int J Advan Manuf Technol 85(9):1–12
Ponto L, Landolt D (1987) Electropolishing of chromium in phosphoric acid–sulphuric acid electrolytes. J Appl Electrochem 17(1):205–214. https://doi.org/10.1007/BF01009147
Lin CC, Hu CC (2008) Electropolishing of 304 stainless steel: surface roughness control using experimental design strategies and a summarized electropolishing model. Electrochim Acta 53(8):3356–3363. https://doi.org/10.1016/j.electacta.2007.11.075
Simka W, Kaczmarek M, Baron-Wiecheć A, Nawrat G, Marciniak J, Żak J (2010) Electropolishing and passivation of NiTi shape memory alloy. Electrochim Acta 55(7):2437–2441. https://doi.org/10.1016/j.electacta.2009.11.097
Park JW, Lee DW (2009). Pulse electrochemical polishing for microrecesses based on a coulostatic analysis. Int J Advan Manuf Technol 40 (7–8):742–748, 748, DOI: https://doi.org/10.1007/s00170-008-1391-y
Huang CA, Hsu FY, Yu CH (2011) Electropolishing behavior of pure titanium in sulfuric acid–ethanol electrolytes with an addition of water. Corros Sci 53(2):589–596. https://doi.org/10.1016/j.corsci.2010.10.002
Zhu D, Wang K, Qu NS (2007) Micro wire electrochemical cutting by using in situ fabricated wire electrode. CIRP Ann–Manuf Techn 56(1):241–244. https://doi.org/10.1016/j.cirp.2007.05.057
Lappin D, Mohammadi AR, Takahata K (2012) An experimental study of electrochemical polishing for micro-electro-discharge-machined stainless-steel stents. J Mater Sci–Mater M 23(2):349–356. https://doi.org/10.1007/s10856-011-4513-2
Awad AM, Ghany NAA, Dahy TM (2010) Removal of tarnishing and roughness of copper surface by electropolishing treatment. Appl Surf Sci 256(13):4370–4375. https://doi.org/10.1016/j.apsusc.2010.02.033
Rotty C, Mandroyan A, Doche ML, Hihn JY (2016) Electropolishing of CuZn brasses and 316L stainless steels: influence of alloy composition or preparation process (ALM vs. standard method). Surf Coat Tech 307:125–135. https://doi.org/10.1016/j.surfcoat.2016.08.076
Schuster R, Kirchner V, Allongue P, Ertl G (2000) Electrochemical micromachining. Science 289(5476):98–101. https://doi.org/10.1126/science.289.5476.98
He HD, Zeng YB, Qu NS (2016) An investigation into wire electrochemical micro machining of pure tungsten. Precis Eng 45:285–291. https://doi.org/10.1016/j.precisioneng.2016.03.005
Funding
This research was supported by the National Natural Science Foundation of China (51375238).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yu, J., Zeng, Y. & Zhu, D. Wire electropolishing of microgroove structures on a cobalt-based alloy. Int J Adv Manuf Technol 96, 3619–3631 (2018). https://doi.org/10.1007/s00170-017-1534-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-1534-0