Abstract
Automated guided vehicles (AGVs) are being extensively used for intelligent transportation and distribution of materials in warehouses and autoproduction lines due to their attributes of high efficiency and low costs. Such vehicles travel along a predefined route to deliver desired tasks without the supervision of an operator. Much effort in this area has focused primarily on route optimisation and traffic management of these AGVs. However, the health management of these vehicles and their optimal mission configuration have received little attention. To assure their added value, taking a typical AGV transport system as an example, the capability to evaluate reliability issues in AGVs are investigated in this paper. Following a failure modes effects and criticality analysis (FMECA), the reliability of the AGV system is analysed via fault tree analysis (FTA) and the vehicles mission reliability is evaluated using the Petri net (PN) method. By performing the analysis, the acceptability of failure of the mission can be analysed, and hence the service capability and potential profit of the AGV system can be reviewed and the mission altered where performance is unacceptable. The PN method could easily be extended to have the capability to deal with fleet AGV mission reliability assessment.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Vis IF (2006) Survey of research in the design and control of automated guided vehicle. Eur J Oper Res 170 (3):677– 709
Tuan LA, Koster De MMD (2006) A review of design and control of automated guided vehicle systems. Eur J Oper Res 171(1):1– 23
Miljković Z, Vuković N, Mitić M, Babić B (2013) New hybrid vision-based control approach for automated guided vehicles. Int J Adv Manuf Technol 66(1):231–249
Bhattacharya R, Bandyopadhyay S (2010) An improved strategy to solve shop deadlock problem based on the study on existing benchmark recovery strategies. Int J Adv Manuf Technol 47:351–364
Giuseppe C, Fabiano M, Liotta G (2013) A network flow based heuristic approach for optimising AGV. J Intell Manuf 24:405–419
Salehipour A, Sepehri MM (2014) Optimal location of workstations in tandem automated-guided vehicle systems. Int J Adv Manuf Technol 72(9):1429–1438
Mallikarjuna K, Veeranna V, Reddy K (2016) A new meta-heuristics for optimum design of loop layout in flexible manufacturing system with integrated scheduling. Int J Adv Manuf Technol 84(9):1841–1860
Wu NQ, Zhou MC (2007) Shortest routing of bidirectional automated guided vehicles avoiding deadlock and blocking. IEEE/ASME Trans Mechatron 12(1):63–72
Nishi T, Tanaka Y (2012) Petri net decomposition approach for dispatching and conflict-free routing of bidirectional automated guided vehicle systems. IEEE Trans Syst Man, Cybern 42(5):1230–1243
Rifai AP, Dawal SZ Md, Zuhdi A, Aoyama H, Case K. (2016) Re-entrant FMS scheduling in loop layout with consideration of multi loading-unloading stations and shortcuts. Int J Adv Manuf Technol 82(9):1527–1545
Vivaldini K, Rocha LF., Martarelli NJ, Becker M, Paulo Moreira A (2016) Integrated tasks assignment and routing for the estimation of the optimal number of AGVS. Int J Adv Manuf Technol 82(1):719–736
Abdelmaguid TF, Nassef AO (2010) A constructive heuristic for the integrated scheduling of machines and multiple-load material handling equipment in job shops. Int J Adv Manuf Technol 46(9):1239–1251
Hamzheei M, Farahani RZ, Rashidi-Bajgan H (2013) An ant colony-based algorithm for finding the shortest bidirectional path for automated guided vehicles in a block layout. Int J Adv Manuf Technol 64(1):399–409
Trenkle A, Seibold Z, Stoll T (2013) Safety requirements and safety functions for decentralized controlled autonomous systems. In: XXIV International Conference on Information, Communication and Automation Technologies (ICAT)
Ebben M (2001) Logistic Control In Automated Transportation Networks. Ph.D. thesis, University of Twente
Fazlollahtabar H, Saidi-Mehrabad M (2013) Optimising a multi-objective reliability assessment in multiple AGV manufacturing system. Int J Serv Oper Manag 3:352–372
Tavana M, Fazlollahtabar H, Hassanzadeh R (2014) A bi-objective stochastic programming model for optimising automated material handling systems with reliability considerations. Int J Prod Res 52(19):5597–5610
Duran DR, Robinson E, Kornecki AJ, Zalewski J (2013) Safety analysis of autonomous ground vehicle optical systems: Bayesian Belief Networks Approach Computer Science and Information Systems (FedCSIS), Federated Conference
XYang W u, XYue W u (2015) Extended object-oriented Petri net model for mission reliability simulation of repairable PMS with common cause failures. Reliab Eng Syst Saf 130:109–119
Le B, Andrews JD (2014) Modelling wind turbine degradation and maintenance. Wind Energy 19:571–591
Luo JL, Ni HJ, Zhou MC (2015) Control program design for automated guided vehicle systems via Petri nets. IEEE Trans Syst Man, Cybern: Syst 45(1):44–55
Nishi T, Maeno R (2010) Petri net decomposition approach to optimization of route planning problems for AGV systems. IEEE Trans Autom Sci Eng 7(3):523–537
Petri CA (1962) Kommunikation mit automaten, PhD thesis
Mura I, Bondavalli A (2001) Markov regenerative stochastic petri nets to model and evaluate phased mission systems dependability. IEEE Trans Comput 50(12):1337–1351
Chew SP, Dunnett SJ, Andrews JD (2008) Phased mission modelling of systems with maintenance-free operating periods using simulated Petri nets. Reliab Eng Syst Saf 93(7):980–994
MacLeod EN, Chiarella M (1993) Navigation and control breakthrough for automated mobility. Proceedings of the SPIE mobile robotics VIII, Boston MA
Division M (1998) Design for success Ultra Reliable Aircraft project. Design 212:371–378
FMD-97 (1997) Failure Mode/Mechanism Distributions, Reliability Analysis Center
Andrews JD, Moss TR (2002) Reliability and risk assessment, 2nd edn. Professional Engineering Publishing
Acknowledgements
The work reported in this paper aligns to the working being researched as part of the EPSRC grant EP/K014137/1. The authors would like to extend thanks to Dr Cunjia Liu at Loughborough University and Mr Dave Berridge at Automated Materials Handling Systems Association for their kind help in preparing this paper.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Yan, R., Jackson, L.M. & Dunnett, S.J. Automated guided vehicle mission reliability modelling using a combined fault tree and Petri net approach. Int J Adv Manuf Technol 92, 1825–1837 (2017). https://doi.org/10.1007/s00170-017-0175-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-0175-7