Abstract
High efficiency deep grinding (HEDG) achieves very high removal rates with moderate temperature rise. It is shown that key factors are high wheel speeds, large depths of cut and moderately high work speeds. High removal rates in HEDG are associated with very efficient grinding and very low specific energy compared to conventional grinding. Although HEDG-enabled machine tools are available, the wider adoption of HEDG requires confidence that high workpiece surface integrity is achievable and sustainable. HEDG is an aggressive machining process that requires a suitable machine tool and workpiece configuration. System requirements include a high-powered spindle drive motor also capable of high spindle speeds, a stiff machine structure, wear-resistant grinding wheels and high-capacity pressurized lubricant supply. This paper presents advances in the development of HEDG. Results of HEDG obtained using a newly designed and unique machine tool are presented to illustrate achievable removal rates. Specific grinding energies are shown together with grinding temperatures measured directly in the contact arc. An enhanced single-pole thermocouple technique is used to measure the actual contact temperatures in deep cutting for validation of predictions. New findings illustrate the performance of high-speed conventional wheels in HEDG compared with the performance of CBN wheels obtained from actual industrial tests.
Similar content being viewed by others
References
Tawakoli T (1993) High efficiency deep grinding. Mechanical Engineering Publications, Ltd., London
Rowe WB (2001) Thermal analysis of high efficiency deep grinding. Int J Mach Tool Manuf 41(1):1–19
Rowe WB, Jin T (2001) Temperatures in high efficiency deep grinding. Ann CIRP 50(1):205–208
Comley P, Walton I, Jin T, Stephenson DJ (2006) A high material removal rate grinding process for the production of automotive crankshafts. Ann CIRP 55/1/2006
Rowe WB (2009) Principles of modern grinding technology, William Andrew, Applied Science Publishers; ISBN 978-0-81-552018-4
Stephenson DJ, Jin T, Corbett J (2002) High efficiency deep grinding of low alloy steel with plated CBN wheels. CIRP Ann 51/1/2002:241–244
Jin T, Stephenson DJ, Corbett J (2002) Burn threshold of high-carbon steel in high efficiency deep grinding. Proc Inst Mech Eng B J Eng Manuf 216:357–364
Morgan MN, Rowe WB, Batako A (2003) Energy limitations in HEDG and conventional grinding. Key Eng Mater 257–258(2004):63–68
Chen X, Rowe WB (2000) “Predicting the transitional boundary of tensile residual stress in grinding” Abrasives Magazine, Feb/March, 28–37
Jin T, Stephenson DJ (2003) Investigation of the heat partitioning in high efficiency deep grinding. Int J Mach Tool Manuf 43(11):1129–1134
Rowe WB, Mills B, Black SCE (1996) Temperature control in CBN grinding. Int J Adv Manuf Technol 387–392(1996)
Rowe WB, Morgan MN, Batako A, Jin T, (2003) “Energy and temperature analysis in grinding” Keynote Paper, Sixth Int. Conf. and Exhibition on Laser Metrology, Machine Tool CMM and Robot Performance–LAMDAMAP, 1–4 July 2003, Huddersfield University; Laser Metrology and Machine Performance VI, 3–23, 2003
Batako ADL, Morgan MN, Rowe WB, Walton IM (2005) Temperature measurement in high efficiency deep grinding (HEDG) using an enhanced single pole thermocouple and PVD techniques, Laser Metrology, Machine Tool CMM and Robot Performance–LAMDAMAP conference, Cranfield, 27–30 June 2005, VII, 332–343, 2005
Batako AD, Rowe WB, Morgan MN (2005) Temperature measurement in high efficiency deep grinding. Int J Mach Tools Manuf 45(11):1231–1245
Carslaw H, Jaeger JC (1959) Conduction of heat in solids. Oxford University Press, Oxford
Rowe WB (1983) Hydrostatic and hybrid bearing design. Butterworth, London
Bell WF (1983) High-rate centreless grinding of ferrous components, Ph.D. Thesis, C.N.A.A., and Department of Mechanical, Marine and Production Engineering, Liverpool Polytechnic
Saint Gobain advertisement literature and leaflets
Batako AD (2010) High efficiency deep grinding (HEDG)—an application with conventional grinding wheels, Proceeding of the 36th Matador Conference, 14–16th July 2010, Manchester, pp. 93–96
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Batako, A.D.L., Morgan, M.N. & Rowe, B.W. High efficiency deep grinding with very high removal rates. Int J Adv Manuf Technol 66, 1367–1377 (2013). https://doi.org/10.1007/s00170-012-4414-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-012-4414-7