Abstract
This paper aims to understand and optimize the crush response of Functionally Graded Thickness (FGT) tubes with various thickness distributions subjected to oblique loading using multi-objective optimization method. Hence, finite element (FE) models are established and their results are validated by experimental tests. Two objective functions (specific energy absorption and peak load) are approximated by four different multi-objective optimization models: the weighted average, multi-design optimization (MDO) technique, constrained single-objective optimization, and geometrical average methods. The optimum design results demonstrate that the selection of appropriate inversion tube parameters such as the die radius, the coefficient of friction between the die and tube, and thickness distribution function have significant roles in the crashworthiness design. The results give new ideas to improve the crashworthiness performance of inversion tubes under oblique loading conditions.
Similar content being viewed by others
References
Ahmad Z, Thambiratnam DP (2009a) Application of foam-filled conical tubes in enhancing the crashworthiness performance of vehicle protective structures. Int J Crashworthiness 14(4):349–363
Ahmad Z, Thambiratnam DP (2009b) Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading. Comput Struct 87(3–4):186–197
Aktay L, Kröplin BH, Toksoy AK, Güden M (2008) Finite element and coupled finite element/smooth particle hydrodynamics modeling of the quasi-static crushing of empty and foam-filled single, bi tubular and constraint hexagonal and square-packed aluminum tubes. Mater Des 29(5):952–962
Alghamdi AAA (2001) Collapsible impact energy absorbers: an overview. Thin-Walled Struct 39(2):189–213
Al-Hassani STS, Johnson W, Lowe WT (1972) Characterization of inversion tubes under axial loading. J Mech Eng Sci 14(6):370–381
Fang J, Gao Y, Sun G, Zheng G, Li Q (2015) Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness. Int J Mech Sci 103:63–73
Fang J, Gao Y, An X, Sun G, Chen J, Li Q (2016a) Design of transversely graded foam and wall thickness structures for crashworthiness criteria. Compos Part B 92:338–349
Fang J, Sun G, Qiu N, Kim NH, Li Q (2016b) On design optimization for structural crashworthiness and its state of the art. Struct Multidiscip Optim. doi:10.1007/s00158-016-1579-y
Guist LR, Marble DP (1966) Prediction of the inversion load of a circular tube. NASATND 3622
Gullerud AS, Koppenhoefer KC, Roy A, Dodds RH Jr (2004) WARP3D: 3-D dynamic nonlinear fracture analysis of solids using parallel computers and workstations. Structural research series (SRS) 607, UILU-ENG-95-2012. University of Illinois, Urbana-Champaign
Hosseini-Tehrani P, Pirmohammad S (2007) Collapse study of thin-walled polygonal section columns subjected to oblique loads. Proc Inst Mech Eng D: J Automob Eng 221(7):801–810
Hosseini-Tehrani P, Pirmohammad S, Golmohammadi M (2008) Study on the collapse of tapered tubes subjected to oblique loads. Proc Inst Mech Eng D: J Automob Eng 222(11):2025–2039
Hou SJ, Li Q, Long SY, Yang XJ, Li W (2008) Multiobjective optimization of multi-cell sections for the crashworthiness design. Int J Impact Eng 35(11):1355–1367
Karagiozova D, Alves M, Jones N (2000) Inertia effects in axisymmetrically deformed cylindrical shells under axial impact. Int J Impact Eng 24(10):1083–1115
Li G, Li Q, Xu F, Sun G, Li Q (2015) A comparative study on thin-walled structures with functionally graded thickness (FGT) and tapered tubes withstanding oblique impact loading. Int J Impact Eng 77:68–83
Liao XT, Li Q, Yang XJ, Zhang WG, Li W (2008) Multiobjective optimization for crash safety design of vehicles using stepwise regression model. Struct Multidiscip Optim 35(6):561–569
Marsolek J, Reimerdes H (2004) Energy absorption of metallic cylindrical shells with induced non-axisymmetric folding patterns. Int J Impact Eng 30(8):1209–1223
Mirfendereski L, Salimi M, Ziaei-Rad S (2008) Parametric study and numerical analysis of empty and foam-filled thin-walled tubes under static and dynamic loadings. Int J Mech Sci 50(6):1042–1057
Mirzaei M, Harandi A, Karimi R (2009) Finite element analysis of deformation and fracture of an exploded gas cylinder. Eng Fail Anal 16:1607–1615
Miscow PC, AL-Qureshi HA (1997) Mechanics of static and dynamic inversion processes. Int J Mech Sci 39:147–161
Mohammadiha O, Ghariblu H (2016) Crush behavior optimization of multi-tubes filled by functionally graded foam. Thin-Walled Struct 98:627–639
Nagel GM, Thambiratnam DP (2005) Computer simulation and energy absorption of tapered thin-walled rectangular tubes. Thin-Walled Struct 43(8):1225–1242
Reddy TY (1992) Guist and Marble revisited—on the natural knuckle radius in tube inversion. Int J Mech Sci 34(10):761–768
Reyes A (2003) Square aluminum tubes subjected to oblique loading. Int J Impact Eng 28:1077–1106
Reyes A, Langseth M, Hopperstad OS (2002) Crashworthiness of aluminum extrusions subjected to oblique loading experiments and numerical analyses. Int J Mech Sci 44:1965–1984
Reyes A, Hopperstad OS, Langseth M (2004) Aluminum foam-filled extrusions subjected to oblique loading: experimental and numerical study. Int J Solids Struct 41(5–6):1645–1675
Rosa PAR, Rodrigues JMC, Martins PAF (2004) An investigation on the external inversion of thin-walled tubes using a die. Int J Plast 20(10):1931–1946
Saleh ghaffari S, Tajdari M, Panahi M, Mokhtarnezhad F (2010) Attempts to improve energy absorption characteristics of circular metal tubes subjected to axial loading. Thin-Walled Struct 48(6):379–390
Sekhon GS, Gupta NK, Gupta PK (2003) An analysis of external inversion of round tubes. J Mater Process Technol 133(3):243–256
Song X, Sun G, Li G, Gao W, Li Q (2013) Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models. Struct Multidiscip Optim 47(2):221–231
Sun GY, Li GY, Hou SJ, Zhou SW, Li W, Li Q (2010) Crashworthiness design for functionally graded foam-filled thin-walled structures. Mater Sci Eng A 527(7–8):1911–1919
Sun G, Xu F, Hou SJ, Li G, Li Q (2014) Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness. Int J Impact Eng 64:62–74
Yang S, Qi C (2013) Multiobjective optimization for empty and foam-filled square columns under oblique impact loading. Int J Impact Eng 54:177–191
Yin H, Fang H, Xiao Y, Wen G, Qing Q (2015) Multi-objective robust optimization of foam-filled tapered multi-cell thin-walled structures. Struct Multidiscip Optim 52(6):1051–1067
Zarei H, Kroger M (2008) Optimum honeycomb filled crash absorber design. Mater Des 29(1):193–204
Zhang X, Huh H (2009) Energy absorption of longitudinally grooved square tubes under axial compression. Thin-Walled Struct 47(12):1469–1477
Zhang X, Zhang H (2013) Energy absorption of multi-cell stub columns under axial compression. Thin-Walled Struct 68:156–163
Zhang X, Zhang H (2014) Axial crushing of circular multi-cell columns. Int J Impact Eng 65:110–125
Zhang H, Zhang X (2016) Crashworthiness performance of conical tubes with nonlinear thickness distribution. Thin-Walled Struct 99:35–44
Zhang X, Cheng G, You Z, Zhang H (2007) Energy absorption of axially compressed thin-walled square tubes with patterns. Thin-Walled Struct 45(9):737–746
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mohammadiha, O., Ghariblu, H. Optimal shape design of functionally graded thickness inversion tubes subjected to oblique loading. Struct Multidisc Optim 56, 587–601 (2017). https://doi.org/10.1007/s00158-017-1676-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-017-1676-6