Zusammenfassung
Der technische Stand von Oberflächenmodifikationen auf metallischen Werkstoffen für orthopädische und dentale Implantate erlaubt deren klinischen Einsatz,wenn Implantatkonstruktion, Herstellungsverfahren, erwartete Funktion und Funktionszeit in vivo aufeinander abgestimmt sind.Hydroxylapatitbeschichtungen eignen sich unter dieser Voraussetzung für eine engere Einbindung von Fixierungskomponenten im Hartgewebe. PVD- (physical vapour deposition) oder PECVD-(plasma enhanced chemical vapor deposition)Modifikationen können Gleitflächen oder Fixierungselemente verschleißfest machen,wenn Flächenpressungen bei sich relativ bewegenden Flächen Grenzwerte nicht überschreiten.
Abstract
State of the art surface modifications on metallic materials for orthopedic and dental implants permit clinical application if implant design,manufacturing process as well as function and duration of implantation are harmonized with each other.Keeping these prerequisites in mind,hydroxylapatite is suited for closer connection of fixation elements in hard tissue. PVD or PECVD modifications can make gliding surfaces or surfaces of fixation elements abrasion resistant if the pressure-area ratio does not exceed threshold values in cases of surfaces moving relative to each other
Author information
Authors and Affiliations
Additional information
Prof.Dr. Ing. Roger Thull Lehrstuhl für Funktionswerkstoffe der Medizin und der Zahnheilkunde, Pleicherwall 2, 97070 Würzburg
Rights and permissions
About this article
Cite this article
Thull, R. Oberflächenmodifikationen zur Verbesserung von Biokompatibilität und mechanischen Eigenschaften von orthopädischen Implantaten. Orthopäde 32, 51–59 (2003). https://doi.org/10.1007/s00132-002-0412-z
Issue Date:
DOI: https://doi.org/10.1007/s00132-002-0412-z