Abstract
The product morphologies obtained on the reduction of wustite in CO/CO2 gas mixtures between 1073 and 1373 K are reported. Three types of product morphology are identified, namely, type A (porous iron), type B (porous wustite covered with dense iron), and type C (dense wustite covered with dense iron). The reactions which occur during the reduction of wustite in CO/CO2 and H2/H2O systems both before and after iron nucleation are examined. The product morphologies obtained on reduction are explained qualitatively in terms of the relative rates of the chemical reaction with the gas and the mass transport processes both in and on the solid.
Similar content being viewed by others
References
D.H. St. John and P.C. Hayes:Metall. Trans. B. 1982. vol. 13B, pp. 117–24.
R. A. Giddings and R. S. Gordan:Amer. Ceramic Soc. Journ., 1973, vol. 56, pp. 111–16.
P.C. Hayes:Metall. Trans. B, 1979, vol. 10B, pp. 211–17.
A. M. Watts, D. H. St. John, and P. C. Hayes:Metall. Trans. B, 1983, vol. 14B, pp. 753–59.
K. H. Ulrich, K. Bohnenkamp, and H. J. Engell:Arch. Eisenh., 1965, vol. 36, pp. 611–18.
L. von Bogdandy and H. J. Engell:The Reduction of Iron Ores, Springer, 1971, p. 95.
B.C.H. Steele: “Physical chemistry of process metallurgy: the Richardson Conference,” J. H. E. Jeffes and R. J. Tait, eds., I.M.M. London, 1974, pp. 1–9.
R. F. Sekerka:Journ. of Crystal Growth, 1968, vol. 3, pp. 71–81.
J. W. Christian:The Theory of Transformations in Metals and Alloys, 2nd ed., Part I, Pergamon, 1975.
K. Wokulska and Z. Wokulski:Acta Physica Pol., 1971, vol. A39, pp. 189–200.
R. Nicolle and A. Rist:Metall. Trans. B, 1979, vol. 10B, pp. 429–38.
E. Riecke, K. Bohnenkamp, and H. J. Engell:Arch. Eisenh., 1967, vol. 38, pp. 249–55.
Author information
Authors and Affiliations
Additional information
Formerly Postdoctoral Fellow at the Department of Mining and Metallurgical Engineering, University of Queensland, St. Lucia, Brisbane, Australia
An erratum to this article is available at http://dx.doi.org/10.1007/BF02686993.
Rights and permissions
About this article
Cite this article
John, D.H.S., Matthew, S.P. & Hayes, P.C. Establishment of product morphology during the initial stages of wustite reduction. Metall Trans B 15, 709–717 (1984). https://doi.org/10.1007/BF02657293
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02657293