Existing designs and manufacturing techniques for filters with a slot-hole structure are analyzed. It is proposed that slotted filter tubes be made by the method of deformational cutting. The method has been realized by through wall slotting of longitudinally corrugated welded metal pipe. Options are discussed for the basic structure of complexes designed to make slot-hole filtering pipes.
Similar content being viewed by others
References
K. Sutherland, Filters and Filtration Handbook, Oxford, Elsevier Science Ltd (2008).
V. M. Gavrilenko and V. S. Alekseev, Filters for Drilling Wells, Nedra, Moscow (1976).
V. N. Konoplev, Yu. V. Konopleva, and A. A. Radchenko, Patent No. 2102110 RF, IPC B23D29/44, “Well filter and method of making it,” subm. 04.09.1996, publ. 01.20.1998, Byull., No. 2 (1998).
D. Matanovic, M. Cikes, and B. Moslavac, Sand Control in Well Construction and Operation, Springer Verlag, Berlin, Heidelberg (2012), pp. 38–49.
E. D. Vaks, M. N. Milen’kii, and L. G. Saprykin, Practical Experience with Precision Laser Treatment, Tekhnosfera, Moscow (2013).
P. P. Serebrenitskii, Modern Electrical-Discharge Machining Technologies and Equipment, Lan’, St. Petersburg (2013).
V. P. Zhitnikov and A. N Zaitsev, Impulsive Electrochemical Treatment, Mashinostroenie, Moscow (2008).
D. Purchas D. and K. Sutherland, Handbook of Filter Media, Elsevier Advanced Technology, Oxford (2002), 2nd ed., pp. 245–250.
P. M. Maiorov and G. G. Pyatyshkin, Water Purification. Methods and Equipment: Handbook, Donetsk Nats. Tekh. Univ, Donetsk (2010).
K. Raghavachari, Patent No. 5207930 US, IPC B01D29/62, “Filtration system with helical filter cartridge,” Crane Co., App. No. 738152 (1993).
B. I. Kolesnikov, Patent No. 2035202 RF, IPC B01D29/62, “Filter,” subm. 09.10.1990, publ. 05.20.1995, Byull., No. 14.
N. N. Zubkov and A. I. Ovchinnikov, Patent EP No. 0727269, IPC B23C 3/00, “Method of producing a surface with alternating ridges and depressions and a tool for carrying out the said method,” subm. 04.27.1994, publ. 08.21.1996.
N. N. Zubkov, “Features of using the method of deformational cutting,” Tekhnol. Mashinostr., No. 1, 19–26 (2001).
N. N. Zubkov and A. D. Slepcov. “Production of slotted polymer tubes by deformational cutting,” Russ. Eng. Res. 30, No. 12, 1231–1233 (2010).
N. N. Zubkov and A. D. Slepcov, “Production of micro-grids and permeable slotted tubes by machining,” Izv. Vuzov. Mashinostr., No. 3, 56–60 (2007).
S. V. Parshin, Processes and Machines for Making Profiled Tubes, UGTU-UPI, Ekaterinburg (2006).
V. A. Vasilyev, “Tube-welding equipment for making tubes of copper and its alloys,” Svarshchik v Rossii, No. 4, 13–16 (2014).
I. I. Dobkin and V. A. Vasilyev, “Welding mills ADST 5…25-1: high efficiency of argon-arc welding of thin-walled tubes,” VO Machinoexport, No. 32–92, 12–15 (1992).
E. M. Donskoi, V. A. Vasilyev, and N. V. Sidorova, Patent No. 2050996 RF, IPC6 B21C37/08, “Working stand of tube-forming mill,” subm. 12.23.1992, publ. 12.27.1995, Byull., No. 36.
N. N. Zubkov, “Finning of heat-exchanger tubes by undercutting and bending back the surface layers,” Nov. Teplosnab., No. 4. 51–53 (2005).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 5, pp. 77–82, May, 2016.
Rights and permissions
About this article
Cite this article
Zubkov, N.N., Vasil’ev, V.A. Filtering Elements of a New Design and Equipment for Their Manufacture. Metallurgist 60, 547–554 (2016). https://doi.org/10.1007/s11015-016-0329-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-016-0329-0