Abstract
The purpose of this work is to develop an express method of evaluating the coefficient of internal friction and cohesive strength of molding material briquettes. Advantages and disadvantages of modern evaluation methods of internal friction parameters in particulates have been considered, and the need to improve them has been substantiated. An alternative method based on measuring the position of shear planes and the briquette cracking pressure in uniaxial compression strength tests has been proposed. The theoretical justification of the method has been provided, and examples of implementation have been given. The research results may be used in the process of educating students of technical specialties, as well as at research and design organizations.
Similar content being viewed by others
References
Isherwood, D.P., Same observation of die wall friction effects in the compaction of polymer granules, Powder Technol., 1987, vol. 48, pp. 253–262.
Krupicz, B. and Tarasiuk, W., Naciski na ścianki formy zamkniętej podczas zagęszczania mieszanki wapiennopiaskowej, Tribologia, 2011, no. 6, pp. 125–131.
Roman, O.V., Vityaz’, P.A., and Perel’man, V.E., The deformations in the powder pressing processes, Mater. 10-i mezhdunar. nauchno-tekh. konf. “Novye materially i tekhnologii: Poroshkovaya metallurgiya, kompozitsionnye materialy, zashchitnye pokrytiya, svarka,” Minsk, 12–14 sentyabrya 2012 g. (Proc. 10th Int. Sci.-Tech. Conf. “New Materials and Technologies: Powder Metallurgy, Composite Materials, Protective Coatings, and Welding,” Minsk, September 12–14, 2012), Minsk: Belaruss. Navuka, 2012, pp. 106–109.
Barsukov, V.G., Krupicz B., and Barsukov, V.V., Tribomechanical analysis of interlayer shear and surface crack nucleation processes in compacted disperse materials, J. Frict. Wear, 2015, vol. 36, no. 2, pp. 112–117.
Heift, R., Cisnieniowa aglomeracja materialow roslinnych (Agglomeration of Vegetable Materials under Pressure) Bialystok: Polit. Bialostocka, Inst. Technol. Ekspl. Radomiu, 2002.
Burkin, S.P., Beketov, A.R., Obabkov, N.V., Andryukova, E.A., Brynskikh, Ya.A., and Iskhakov, R.F., Determination of friction coefficients during pressing of refractory metal powders, Trenie Iznos, 2009, vol. 30, no. 2, pp. 122–131.
Tüzün, U., Effects of consolidation and yield history on the measured angles of friction of particulate solids, in Tribology in Particulate Technology, Briscoe, B.J. and Adams, M.J., Eds., Bristol: Adam Higler, 1987, pp. 38–62.
Tsytovich, N.A., Mekhanika gruntov: uchebnik (Mechanics of Grounds: Manual), Moscow: Librokom, 2009, 5th ed.
Stavrov, V.P., Dedyukhin, V.G., and Sokolov, A.D., Tekhnologicheskie ispytaniya reaktoplastov (Technological Tests of Thermosets), Moscow: Khimiya, 1981.
Vinokurov, E.F., Balykin, M.K., and Golubev, I.A., Spravochnik po soprotivleniyu materialov (Handbook on Resistance of Materials), Minsk: Nauka i Tekhnika, 1988.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Barsukov, V. Tarasiuk, V.M. Shapovalov, B. Krupicz, V.G. Barsukov, 2017, published in Trenie i Iznos, 2017, Vol. 38, No. 1, pp. 48–55.
About this article
Cite this article
Barsukov, V.V., Tarasiuk, V., Shapovalov, V.M. et al. Express evaluation method of internal friction parameters in molding material briquettes. J. Frict. Wear 38, 71–76 (2017). https://doi.org/10.3103/S1068366617010032
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366617010032