Abstract
Gears treated by intense nitrogen ion flows were calculated for preventing deep contact pitting, allowing for the real distributions of hardness in the depth of the hardened layer and reduced stresses. A method for calculating the contact endurance of gears hardened by ion-beam nitriding was proposed. The results of the calculations and experiments have shown that ion-beam nitriding leads to an increase in the load-carrying capacity of a gear 1.31 times in comparison with that of a gear with gears subjected to traditional nitriding; the wear resistance of the ion-nitrided gears is two times greater than that of hardened and tempered gears.
References
Gal’per, R.R., Kontaktnaya prochnost’ zubchatykh peredach s poverkhnostnym uprochneniem (Contact Strength of Teeth Gearings with Surface Strenthening), Leningrad: Leningrad. Dom Nauch.-Tekhn. Propagandy, 1964.
Balashov, B.A., Gal’per, R.R., Garkavi, L.M., et al., Reduktory energeticheskikh mashin: Spravochnik (Reducing Gears for Energy-Converting Machines: Handbook), Derzhavts, Yu.A., Ed., Leningrad: Mashinostroenie, 1985.
Berestnev, O.V. and Sobolev, A.S., Issledovanie vliyaniya tekhnologii okonchatel’noi obrabotki zubchatykh koles na ikh rabotosposobnost’. Informatsionnye materialy (How Finishing Processing Technology for Teeth Wheels Influences onto Their Operation Ability. Information Materials), Moscow: Central Research Institute of Machine Building, 1971.
Reshetov, D.N., Detali mashin (Machines Elements), Moscow: Mashinostroenie, 1989.
GOST (State Standard) no. 21354-87: Involute Cylindrical External Gear Sets. Strength Calculations, Moscow: Izd. Standartov, 1988.
Belyi, A.V., Kukareko, V.A., and Pateyuk, A., Inzheneriya poverkhnostei konstruktsionnykh materialov kontsentrirovannymi potokami ionov azota (Structure Materials Surface Engineering by Means of Concentrated Flows of Nitrogen Ions), Minsk: Belorusskaya nauka, 2007.
Tyumentsev, A.N., Korotaev, A.D., and Bugaev, S.P., Regularities of structure-phase transitions in metallic alloys under high-doze ions implanting, Izv. Vyssh. Uchebn. Zaved., Fiz., 1994, no. 5, pp. 8–22.
Vityaz’, P.A., Belyi, A.V., Kukareko, V.A., et al., Contact and fatigue resistance for chrome steels modified by nitrogen ions, Fiz. Mezomekh., 2004, vol. 7,part 2, pp. 149–152.
Belyi, A.V. and Kukareko, V.A., Structure state and wear resistance of chrome steels modified by nitrogen ions, Fiz. Met. Metalloved., 2007, vol. 104, no. 6, pp. 641–649.
Lakhtin, Yu.M., Kogan, Ya.D., Shpis, G.I., et al., Teoriya i tekhnologiya azotirovaniya (Nitrition: Theory and Technique), Moscow: Metallurgiya, 1991.
Demidov, S.P., Teoriya uprugosti: Uchebnik dlya vuzov (Elasticity Theory. Student’s Book for High School), Moscow: Vysshaya shkola, 1979.
Additional information
Original Russian Text © A.M. Goman, V.A. Kukareko, 2014, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2014, No. 1, pp. 85–91.
About this article
Cite this article
Goman, A.M., Kukareko, V.A. Contact endurance of gearing teeth subjected to ion-beam nitriding. J. Mach. Manuf. Reliab. 43, 69–74 (2014). https://doi.org/10.3103/S1052618814010063
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618814010063