Abstract
An experimental study of the process of high-speed acceleration in a ballistic booster complex–reference node pair was carried out as well as mathematical modeling of the distribution of temperature fields in the reference node material. Metallographic study was done to confirm the modeling.
Similar content being viewed by others
References
Ettls, M.S., The Heat Effect on Friction at High Sliding Speeds, Probl. Tren., 1986, no. 1, pp. 71–78.
Griffiths, J.B., Mechanisms of White Layer Generation with Reference to Machining and Deformation Processes, J. Tribol, 1987, vol. 109, no. 3, pp. 525–530.
Griffiths, J.B., White Layer Formations atMachine Surfaces and Their Relationship White Layer Formations atWorn Surfaces, J. Tribol, 1985, vol. 107, no. 2, pp. 165–171.
Grozin, B.D. and Yankevich, V.F., Structure of White Layers, in Trenie i iznos v mashinakh (Friction and Wear in Machines), Moscow: Izd. AN SSSR, 1962, iss. 15, pp. 167–177.
Kuznetsov, V.D., Savitskii, K.V., and Sukharina, N.N., Some Specific Features of the Structure of White Films, Fiz. Metal. Metallov., 1963, vol. 15, no. 1, p. 145.
Bailey, J.A., Jeelani, S., and Becker, S.E., Surface Integrity in Machining AISI 4340 Steel, ASME J. Eng. Ind., 1976, vol. 98, pp. 999–1006.
Kuritsina, A.D., The Origin of the White Phase on the Friction Surfaces, in Trenie i iznos v mashinakh (Friction andWear inMachines), Moscow: Izd. AN SSSR, 1956, iss. 11, pp. 182–203.
Savchenko, N.L., Gnyusov, S.F., and Kul’kov, S.N., Formation of “White Layer” on the Surface of a Solid Alloy by Friction, Persp. Mater., 2009, no. 4, pp. 71–74.
Savchenko, N.L., Gnyusov, S.F., and Kul’kov, S.N., Structures Formed during the Friction of Metal–Ceramic Composite on Steel under High-Velocity Sliding, Pis’ma ZhTF, 2009, vol. 35, no. 3, pp. 17–25.
Nizhnik, S.B., The Role of Temperature and Pressure in the Formation of the Structure ofWhite Layers, Fiz. Khim. Obrab.Mater., 1966, vol. 2, no. 3, pp. 343–347.
Nizhnik, S.B., Formation of Secondary Structures in Steels at High Pulsed Temperature and Pressure, Metally, 2006, no. 4, pp. 42–53.
Akcan, S., Shah, S., Moylan, S.P., Chhabra, P.N., Chandrasekar, S., and Yang, H.T.Y., Formation of White Layers in Steels by Machining and Their Characteristics, Metall. Mater. Trans. A, 2002, vol. 33, pp. 1245–1254.
Brainin, I.A. and Seleznev, N.M., Carburization of Surface Layers by Friction Due to Lubrication and Counterbody, Fiz.Metal. Metallov., 1961, pp. 12–26.
Khimukhin, S.N., Teslina, M.A., Ri, H., and Ri, E.H., Microstructure Formation and Properties of a “White Layer” on Steels at Low-Voltage Electrospark Deposition, Upr. Tekhn. Pokr., 2011, no. 4, pp. 7–11.
Zubchenko, F.S., Koloskov, M.M., et al., Marochnik stalei i splavov (Grade List of Steels and Alloys), 2nd ed., Zubchenko, A.S., Ed., Moscow: Mashinostroenie, 2003.
Guskov, A., Milevsky, K.E., and Slesareva, E.Yu., Investigation of the Process of Movement of aMaster Belt of Artillery Projectile in the Heat Engine, Fiz., 2013, nos. 6/3, pp. 14–15.
Guskov, A., Zezulinsky, J., and Milevsky, K., Mathematical Modeling of Heat Friction Contact Master Belt with the Gun Mount Barrel during the Process of High-Speed Motion, MATEC Web Conf., 2016, vol. 72, Heat and Mass Transfer in the System of Thermal Models of Energy-Technical and Technological Equipment (HMTTSC-2016), pap. 01132.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Guskov, A.V., Lider, A.M., Maksimov, V.I. et al. Heat and Mass Transfer during High-Speed Acceleration of Steel Reference Node through the Channel of Ballistic Booster Complex. J. Engin. Thermophys. 27, 369–377 (2018). https://doi.org/10.1134/S1810232818030128
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1810232818030128