Abstract
The results of experiments are presented on the deposition onto silicate glasses of thin refractory-metal-films: molybdenum, tantalum and tungsten. The technique used for manufacturing films was based on the deposition of metal-containing plasma formed when exposing the surface of foils made of refractory metals to high-power plasma and ion pulses. For generation of such pulses, the facility of plasma focus type was used, which makes it possible to obtain ion beams and plasma flows with the energy flux density in the range of 1010–1012 W/cm2. The most intense central part of the ion-plasma flow was separated using metal di-aphragms with aperture diameters of 2.5, 3.5, and 4.5 mm. Metal Mo, Ta and W films with dimensions of ∅3–5 mm were obtained on the surfaces of glasses. Metal films are characterized by good adhesion, since they coalesce with the glass surface. It was discovered that the planarity of films becomes violated due to the drift of molten metal particles under the glass surface. The relief of films is non-uniform, which can be explained by the presence of micrometer-sized metal particles in the plasma flow.
REFERENCES
I. P. Bushminskii and G. V. Morozov, Technological Design of Microwave Chips (Mosk. Gos. Univ. im N.E. Baumana, Moscow, 2001) [in Russian].
R. B. V. Chalapathy and K. T. Ramakrishna Reddy, Adv. Mater. Sci. Technol. 1, 1 (1998).
Handbook of Thin-Film Technology, Ed. by L. I. Maissel and R. Glang (McGraw-Hill, New York, 1970), Vol. 1.
V. F. Pichugin, Materials Science of Surfaces and Thin Films (Tomsk. Politekh. Univ., Tomsk, 2008) [in Russian].
E. Roduner, Size Effects in Nanomaterials (Tekhnosfera, Moscow, 2010) [in Russian].
L. S. Palatnik, Materials Science in Microelectronics (Energiya, Moscow, 1977) [in Russian].
G. I. Epifanov and Yu. A. Moma, Physical Principles of Design and Technologies of REA and EVA (Sov. Radio, Moscow, 1979) [in Russian].
Handbook of Thin Film Technology, Ed. by L. I. Maissel and R. Glang (McGraw-Hill, New York, 1970), Vol. 2.
Sputtering by Particle Bombardment, Ed. by R. Behrisch and W. Eckstein (Springer, Berlin, 2007), p. 33.
B. S. Danilin, Application of Low-Temperature Plasmas for Depositing Thin Films (Energoatomizdat, Moscow, 1989) [in Russian].
S. N. Polukhin, V. Ya. Nikulin, and P. V. Silin, Plasma Phys. Rep. 48, 346 (2022). https://doi.org/10.1134/S1063780X22040110
V. Ya. Nikulin, V. N. Kolokoltsev, P. V. Silin, and S. N. Polukhin, Bull. Lebedev Phys. Inst. 46, 360 (2019). https://doi.org/10.3103/S1068335619110083
G. G. Bondarenko, I. V. Borovitskaya, V. N. Pimenov, V. A. Gribkov, M. Paduch, A. I. Gaidar, V. V. Paramonova, and E. V. Morozov, Russ. Metall. 2017, 928 (2017). https://doi.org/10.1134/S0036029517110064
V. N. Kokololtsev, S. A. Maslyaev, I. V. Borovitskaya, V. Ya. Nikulin, P. V. Silin, and E. N. Peregudova, J. Phys.: Conf. Ser. 1647, 012017 (2020). https://doi.org/10.1088/1742-6596/1647/1/012017
Handbook of Physical Quantities, Ed. by I. S. Grigoriev and E. Z. Meilikhov (Energoatomizdat, Moscow, 1991; CRC, Boca Raton, 1997).
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by I. Grishina
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kolokoltsev, V.N., Nikulin, V.Y., Silin, P.V. et al. Deposition of Thin Refractory-Metal-Films onto Glasses through Diaphragms at Plasma Focus Facility. Plasma Phys. Rep. 50, 342–349 (2024). https://doi.org/10.1134/S1063780X24600178
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063780X24600178