Abstract
Adhesive contact with exponential adhesive interaction is simulated with the use of the method of dimensionality reduction. The developed procedure is illustrated with an example of adhesion of a cylindrical punch and an elastic half space. However, it is general and can be used for any form of interaction potential and any form of indenter.
Similar content being viewed by others
References
Gao, J., Luedtke, W.D., Gourdon, D., Ruths, M., and Israelachvili, J.N., Frictional Forces and Amontons’ Law: From the Molecular to the Macroscopic Scale, Phys. Chem. B, 2004, vol. 108, pp. 3410–3425.
Tomas, J., Mechanics ofNanoparticle Adhesion—A Continuum Approach, Part. Surfaces, 2003, vol. 8, pp. 147.
Johnson, K.L., Kendall, K., and Roberts, A.D., Surface Energy and the Contact of Elastic Solids, Proc. Roy. Soc. Lond. A, 1971, vol. 324, pp. 301–313.
Borodich, F.M., Galanov, B.A., and Suarez-Alvarez, M.M., The JKR-Type Adhesive Contact Problems for Power-Law Shaped Axisymmetric Punches, J. Mech. Phys. Solids, 2014, vol. 68, pp. 14–32.
Jin, F. and Guo, X., Non-Slipping Adhesive Contact of a Rigid Cylinder on an Elastic Power-Law Graded HalfSpace, Int. J. Solids Struct., 2010, vol. 47, pp. 15081521.
Maugis, D., Adhesion of Spheres: The JKR-DMT Transition Using a Dugdale Model, J. Colloid Interf Sci., 1992, vol. 150, pp. 243–269.
Dugdale, D.S., Yielding of Steel Sheets Containing Slits, J. Mech. Phys. Solids, 1960, vol. 8, pp. 100–104.
Sneddon, I.N., The Relation between Load and Penetration in the Axisymmetric Boussinesq Problem for a Punch of Arbitrary Profile, Int. J. Eng. Sci., 1965, vol. 3, no. 1, pp. 47–57.
Galin, L.A., Contact Problems in the Theory of Elasticity, North Carolina State College, 1961.
Popov, V.L. and Hess, M., Method of Dimensionality Reduction in Contact Mechanics and Friction, Berlin: Springer-Verlag, 2014.
Heß, M., On the Reduction Method of Dimensionality: The Exact Mapping of Axisymmetric Contact Problems with and without Adhesion, Phys. Mesomech., 2012, vol. 15, no. 5-6, pp. 264–269.
Li, Q., Dimaki, A., Popov, M., Psakhie, S.G., and Popov, V.L., Kinetics of the Coefficient of Friction of Elastomers, Sci. Rep., 2014, vol. 4, p. 5795.
Dimaki, A.V., Dmitriev, A.I., Chai, Y.S., and Popov, V.L., Rapid Simulation Procedure for Fretting Wear on the Basis of the Method of Dimensionality Reduction., Int. J. Solids Struct., 2014, vol. 51, pp. 4215–4220.
Popov, V.L. and Hess, M., Method of Dimensionality Reduction in Contact Mechanics and Friction: a Users Handbook. I. Axially-Symmetric Contacts, Facta Universitatis. Ser. Mech. Eng., 2014, vol. 12, no. 1, pp. 114.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Text © A.V Dimaki, 2015, published in Fizicheskaya Mezomekhanika, 2015, Vol. 18, No. 4, pp. 42-45.
Rights and permissions
About this article
Cite this article
Dimaki, A.V. Normal contact problem between a cylindrical indenter and a half-space with long-range adhesion: Study with the method of dimensionality reduction. Phys Mesomech 19, 154–157 (2016). https://doi.org/10.1134/S1029959916020065
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1029959916020065