Abstract
The obtaining of double layer cylindrical blanks with a combination of layers of a heat-resistant niobium alloy N65V2MTs + a high-strength steel OKhN3M is studied. A cladding technique with the N65V2MTs alloy inside of a cylindrical surface of the steel OKhN3M is developed and the prototypes with 100% integrity of the layers on the entire length of the blanks are produced. A microanalysis of the welding zone of the layers shows the need for optimization of the explosive welding to reduce the thickness of the transition zone and to create a more even waveform of the welding zone.
Similar content being viewed by others
References
Chepurko, M.I., Ostrenko, V.Ya., Kogadeev, A.A., et al., Proizvodstvo bimetallicheskikh trub i prutkov (Production of Bimetallic Pipes and Rods), Moscow: Metallurgiya, 1986.
Makarova, E.L., Svarivaemost’ materilov (Weldability of Materials), Moscow: Metallurgiya, 1991.
Selivanov, V.V., Kobylkin, I.F., and Novikov, S.A., Vzryvnye tekhnologii: uchebnik dlya vtuzov (Explosive Technologies: Textbook for Technical Colleges), Moscow: Bauman MSTU, 2008.
Konon, Yu.A., Pervukhin, L.B., and Chudnovskii, A.D., Svarka vzryvom (Explosive Welding), Moscow: Mashinostr., 1987.
Malakhov, A.Yu., Pervukhin, L.B., Saikov, I.V., and Vikhman, V.B., Explosion welding of high-strength bimetallic materials with a cladding layer based on niobium and nickel–cobalt alloys, Welding Int., 2015, vol. 29, no. 10, pp. 805–808. doi: 10.1080/09507116.2014.986887
Wei, D., Ming, L., Xiaojie, T., and Rxun, D., Experimental and interfacial waveform investigation on aluminum/stainless steel composite tube by explosive welding, Adv. Mech. Eng. Its Appl. (AMEA), 2013, no. 2, pp. 304–308.
Zamani, E. and Liaghat, G. H., Explosive welding of stainless steel–carbon steel coaxial pipes, J. Mater. Sci., 2012, no. 47, pp. 685–695.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.Yu. Malakhov, I.V. Saikov, O.L. Pervukhina, L.B. Pervukhin, 2015, published in Perspektivnye Materialy, 2015, No. 10, pp. 80–84.
Rights and permissions
About this article
Cite this article
Malakhov, A.Y., Saikov, I.V., Pervukhina, O.L. et al. Explosive cladding of the inner side of a steel tube with a heat-resistant niobium alloy. Inorg. Mater. Appl. Res. 7, 300–302 (2016). https://doi.org/10.1134/S2075113316020131
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113316020131