Abstract
Transmission electron microscopy has been used to study the microstructure of an experimental white cast iron, in which a combination of modified alloy composition and unconventional heat treatment has resulted in a fracture toughness of 40 MPa m-1/2. Microstructural features of the alloy that contribute to the toughness improvement and hence distinguish it from conventional white irons have been investigated. In the as-cast condition the dendrites are fully austenitic and the eutectic consists of M7C3 carbides and martensite. During heat treatment at 1130 °C the austenite is partially destabilized by precipitation of chromium-rich M7C3 carbides. This results in a dendritic microconstituent consisting of bulk retained austenite and secondary carbides which are sheathed with martensite. The martensite sheaths, which contain interlath films of retained austenite, are irregular in shape with some laths extending into the bulk retained austenite. Emphasis has been placed on the morphology, distribution, and stability of the retained austenite and its transformation products in the dendrites. The implications of these findings on the transformation toughening mechanism in this alloy are discussed.
Similar content being viewed by others
References
D. E. DIESBURG and F. BORIK, in Proceedings of Symposium on Materials for the Mining Industry, Vail, Colorado, 1974, edited by R. Q. Barr (Climax Molybdenum Company) p. 15.
K. H. ZUM GAHR and W. G. SCHOLZ,J. Metals 32 (1980) 38.
K. H. ZUM GAHR and D. V. DOANE,Metall. Trans. A 11A (1980) 613.
M. RADULOVIC, M. FISET, K. PEEV and M. TOMOVIC,J. Mater. Sci. 29 (1994) 5085.
F. MARATRAY and A. POULALION,AFS Trans. 90 (1982) 795.
G. L. F. POWELL and G. LAIRD II,J. Mater. Sci. 27 (1992) 29.
A. KOOTSOOKOS, PhD thesis, The University of Queensland, (1995).
A. KOOTSOOKOS, J. D. GATES and R. A. EATON,Cast Metals 7 (1995) 239.
S. K. HANN and J. D. GATES,J. Mater. Sci. 32 (1997) 1249.
P. DUPIN, J. SAVERNA and J. M. SCHISSLER,AFS Trans. 90 (1982) 711.
V. BISS,Microstruct. Sci. 7 (1979) 412.
J. T. H. PEARCE,Wear 89 (1983) 333.
Idem,J. Mater. Sci. Lett. 2 (1983) 428.
Idem,AFS Trans. 126 (1984) 599.
J. T. H. PEARCE and D. W. L. ELWELL,J. Mater. Sci. Lett. 5 (1986) 1063.
G. L. F. POWELL and J. V. BEE,J. Mater. Sci. 31 (1996) 707.
J. V. BEE, G. L. F. POWELL and B. BEDNARZ,Scripta Metall. Mater. 31 (1994) 1735.
W. DUDZINSKI, J. P. MORNIROLI and M. GANTOIS,J. Mater. Sci. 15 (1980) 1387.
J. P. MORNIROLI, E. BAUER-GROSSE and M. GANTOIS,Phil. Mag. A 48 (1983) 311.
T. OHIDE and G. OHIRA,Brit. Foundryman 76 (1983) 7.
P. R. HOWELL, J. V. BEE and R. W. K. HONEYCOMBE,Metall. Trans. A 10A (1979) 1213.
R. W. K. HONEYCOMBE ”Steels: microstructure and properties”, (Edward Arnold Ltd, London, 1981).
J. W. BROOKS, M. H. LORETTO and R.E. SMALLMAN,Acta Metall. 27 (1979) 1829.
K. R. KINSMAN and J. C. SHYNE,ibid. 14 (1966) 1063.
R. A. RICKS, J. V. BEE and P. R. HOWELL,Metall. Trans. A 12A (1981) 1587.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
HANN, S.K., GATES, J.D. & BEE, J.V. Transmission electron microscopy of a transformation toughened white cast iron. Journal of Materials Science 32, 3443–3450 (1997). https://doi.org/10.1023/A:1018676818148
Issue Date:
DOI: https://doi.org/10.1023/A:1018676818148