Abstract
The work presented in this paper deals with the study of the influence of the operating parameters of welding on observables which are the geometrical characteristics of the melted zone. In this study, the method implemented is of the SMAW (Shielded metal arc welding) manual arc type and is used to assemble the pipes through the filling of a V-shaped chamfer between two tubes 1219.5 mm in diameter, 13 mm thick, and a material of grade X70 steel. In order to increase the productivity and reliability of the chamfer filling operation, we used the experimental designs method, on the one hand to estimate the effects of the operating parameters and their interactions on several functions characterizing the morphology of the weld bead, and on the other hand, to provide a mathematical model that links the welding process operating parameters to the objective functions studied.
Similar content being viewed by others
References
Sidhu GS, Chatha SS (2012) Role of shielded metal arc welding consumables on pipe weld joint. Int J Emerg Technol Adv Eng 2(12):ISSN 2250-2459
Mvola B, Kah P, Martikainen J, Suoranta R (2014) State-of-the-art of advanced gas metal arc welding processes: Dissimilar metal welding. Proc Inst Mech Eng B J Eng Manuf 229:1694–1710
Anren Y, Zhen L, Sansan A (2012) A CMOS Visual Sensing System for Welding Control and Information Acquirement in SMAW Process. Phys Procedia 25:22–29
Selvi S, Sankaran SP, Srivatsavan R (2008) Comparative study of hardfacing of valve seat ring using MMAW process. J Mater Process Technol 207:356–362
Saxena A, Kumaraswamy A, Madhusudhan Reddy G, Madhu V (2018) Influence of welding consumables on tensile and impact properties of multi-pass SMAW Armox 500 T steel joints vis-a-vis base metal. Defence Technol 14:188–195
Jorge LDJ, Cândido VS, Silva ACRD, Filho FDCG, Pereira AC, Luz FSD, Monteiro SN (2018) Mechanical properties and microstructure of SMAW welded and thermically treated HSLA-80 steel. J Mater Res Technol 7:598–605
Raffi M, Madhusudhan Reddy G, Srinivasa Rao K (2015) Microstructure and pitting corrosion of shielded metal arc welded high nitrogen stainless steel. Defence Technol 11:237–243
Verma J, Taiwade RV, Khatirkar RK, Sapate SG, Gaikwad AD (2016) Microstructure, Mechanical and Intergranular Corrosion Behavior of Dissimilar DSS 2205 and ASS 316 L Shielded Metal Arc Welds. Trans Indian Inst Metals 70:225–237
Dhas J, Satheesh M (2013) Sensitivity analysis of submerged arc welding parameters for low alloy steel weldment. Indian J Eng Mater Sci 20:425–434
Singh RP, Garg R, Shukla DK (2016) Mathematical modeling of effect of polarity on weld bead geometry in submerged arc welding. J Manuf Process 21:14–22
Hayajneh MT, Al-Dwairi AF, Obeidat SF (2018) Optimization and control of bending distortion of submerged arc welding I-beams. J Constr Steel Res 142:78–85
Sailender M, Reddy GC, Venkatesh S (2018) Influences of process parameters on weld strength of low carbon alloy steel in purged SAW. Materials Today: Proceedings 5:2928–2937
Patil US, Kadam MS (2020) Multiobjective optimization of MMAW process parameters for joining stainless steel 304 with mild steel by using response surface methodology. Materials Today: Proceedings 26:305–310
Shukla AA, Joshi VS, Chel A, Shukla BA (2018) Analysis of Shieldedmetal arc welding parameter on Depth of Penetration on AISI 1020 plates using Response surface methodology. Procedia Manuf 20:239–246
Lenin N, Sivakumar M, Vigneshkumar D (2010) Process parameter optimization in ARC welding of dissimilar metals, Thammasat. Int J Sc Tech 15(3)
Ahire PG, Patil US, Kadam MS (2018) Genetic algorithm based optimization of the process parameters for manual metal arc welding of dissimilar metal joint. Procedia Manuf 20:106–112
Singh PK, Patel D, Prasad S (2016) Optimization of process parameters during vibratory welding technique using Taguchi's analysis. Perspect Sci 8:399–402
Goupy J (2001) Introduction aux plans d’expériences, 2nd edn. Dunond, Paris
Huang H-Y (2010) Effects of activating flux on the welded joint characteristics in gas metal arc welding. Materials & Design (1980-2015) 31:2488–2495
Martinez-Conesa EJ, Egea JA, Miguel V, Toledo C, Meseguer-Valdenebro JL (2017) Optimization of geometric parameters in a welded joint through response surface methodology. Constr Build Mater 154:105–114
Srivastava S, Garg R (2017) Process parameter optimization of gas metal arc welding on IS: 2062 mild steel using response surface methodology. J Manuf Process 25:296–305
Bidi L, Mattei S, Cicala E, Andrzejewski H, Le Masson P, Schroeder J (2011) The use of exploratory experimental designs combined with thermal numerical modelling to obtain a predictive tool for hybrid laser/MIG welding and coating processes. Opt Laser Technol 43:537–545
Bidi L, Le Masson P, Cicala E, Primault C (2017) Experimental design method to the weld bead geometry optimization for hybrid laser-MAG welding in a narrow chamfer configuration. Opt Laser Technol 89:114–125
Ahna J, Chenb L, Heb E, Deara JP, Daviesa CM (2018) Optimisation of process parameters and weld shape of high power Yb-fibre laser welded 2024-T3 aluminium alloy. J Manuf Process 34:70–85
Ibrahim IA, Mohamat SA, Amir A, Ghalib A (2012) The Effect of Gas Metal Arc Welding (GMAW) processes on different welding parameters. Procedia Eng 41:1502–1506
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Bensiali, H., Bidi, L., Cicala, E. et al. Effects of operating parameters on weld bead morphology with welding operations of API 5L X70 steel pipes by SMAW process. Weld World 65, 1119–1129 (2021). https://doi.org/10.1007/s40194-021-01085-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40194-021-01085-4