Abstract
Based on the shaking table test of 1:20 scale structural models of the large-span isolated and non-isolated flat grid structures under the action of horizontal-bidirectional (2D) and three-dimensional (3D) rare earthquake, the dynamic characteristics, including natural vibration frequency, damping ratio, the acceleration and displacement responses are investigated. The results show that the base isolation could significantly prolong the structural vibration periods and increase the damping ratio. The capacity of energy dissipation for the base-isolated structure can also be improved. The horizontal acceleration amplification factors (AAFs) of the structure can be reduced greatly due to the base isolation, which effectively reduces the vertical vibration of the large-span grid. Under the 3D seismic input, the horizontal AAF of each layer is greater than that under the 2D one, which illustrates that the vertical seismic input increases the horizontal dynamic response of the structure. Furthermore, the finite element models of the isolated and non-isolated structures were simulated. The experimental results are in good agreement with the numerical results. The parameter optimization of isolation bearings was conducted by using finite element software. The seismic response of each layer under different shear to weight ratios (μ) was analyzed. It can be found that the parameters of the isolation layer have an optimal range which makes the dynamic response of the structure reach a minimum value under the rare earthquake.
Similar content being viewed by others
Change history
31 March 2018
Zhen-yuan Gu, Shu-guang Wang*, Wei-qing Liu, Dong-sheng Du, and Wei-zhi Xu College of Civil Engineering, Nanjing Tech University, Jiangsu, Nanjing, 211816, China
The above authors’ information should be as following:
Zhen-yuan Gu1,2, Shu-guang Wang2,*, Wei-qing Liu2, Dong-sheng Du2, and Wei-zhi Xu2
1School of Civil Engineering and Architecture, Nantong University, 226019, China
2College of Civil Engineering, Nanjing Tech University, 211816, China
References
Buckle, I., Nagarajaiah, S., Ferrell, K. (2002). “Stability of Elastomeric Isolation Bearings: Experimental Study.” Journal of Structural Engineering, 128(1), pp. 3–1l.
Chen, Y. Y. (2001). World Excellence of Building structure Design: Japanese articles, Beijing: China Architecture and Building Press, pp. 121–122 (in Chinese).
Chung, W. J., Yun, C. B., Kim, N. S., et al. (1999). “Shaking table and pseudo dynamic tests for the evaluation of seismic performance of base-isolated structures.” Engineering Structure, 21(4), pp. 365–379.
Clough, R. W., Penzien, J. (1993). “Dynamics of structures.” New York: McGraw-Hill, Inc. 2nd edition, pp. 20–25.
Edward, L.W. (2002). “Three-Dimensional Static and Dynamic Analysis of Structures.” Computers and Structures, Inc., 12, pp. 234–249.
Ghafory-Ashtiany, M., Singh, M. P. (1986). “Structural response of six correlated earthquake components.” Earthquake Engineering and Structural Dynamics, 14(l), pp. 103–119.
Kato, S., Shomura, M., Mukaiyama, Y. (1995). “Study on dynamic behavior and collapse acceleration of single layer reticular domes subjected to horizontal and vertical earthquake motions.” Journal of Structural and Construction Engineering, 477(11), pp. 87–96.
Liu, W. G. (2003). Mechanics Properties of Rubber Bearing and Earthquake Response Analysis of Isolated Structures, Beijing: the College of Architecture and Civil Engineering, Beijing University of Technology, 2003 (in Chinese).
Li, H. N. (1998). Theoretical Analysis and Design of Structures to Multiple Earthquake Excitations, Beijing: Science Press (in Chinese).
Li, Y. M., Bai, S. L., Lai, M. (2000). “A Study on Correlativity of the Characteristics of Non-stationary Frequencies of 3-D Earthquake Ground Motions.” Journal of Chongqing Jianzhu University, 22(Z0), pp. 22–26 (in Chinese).
Moroni, M., Sarrazin, M., Boroschek, R. (1998). “Experiment on base-isolated building in santiago, Chile.” Engineering Structure, 20(8), pp. 720–725.
Mokha, A., Lee, P. L., Wang X. (1999). “Seismic Isolation Design of the New International Terminal at San Francisco International Airport.” Conference on Struct. Eng. in the 21st Century, pp. 95–98.
Natan, N. D., Chorry, S., Mckeritt, W. E. (1977). “Structural response to simultaneous multi component seismic input.” Proc. 6th World Conf. on Earthquake Engineering, Vol.2. New Delhi., India, pp. 1160–1165.
Ogden, R.W. (1972). “Large deformation isotropic elasticity-On the correlation of theory and experiment for incompressible rubber-like solids.” Proceeding of the Royal Society, London, Vol. 326, pp. 565–584.
Penzien, J., Watabe, M. (1975). “Characteristics of 3-dimensional earthquake ground motion.” Earthquake Engineering and Structural Dynamics, 3, pp. 365–373.
Shingu, K., Fukushima, K. (1993). “Base isolation and fuzzy vibration control of a spherical shell subjected to seismic forces.” Proc. of Asia-Pacific Vibration Conference, Kitakyushu, Japan, pp. 1413–1418.
Shingu, K., Hiratsuka K. (1997). “Dynamic response of base isolated rotational shell with edge beam and fuzzy vibration control of the shell.” International Journal of Space Structures, 12(3&4), pp. 173–179.
Wen, Y. K. (1976). “Method for random vibration of hysteretic system.”Journal of the Engineering Mechanics Division, ASCE, 102(2), pp. 249–263.
Wang, S. G., Lu, W. D., Liu, W. Q., et al. (2011). “Seismic isolation design and dynamic analysis of Kunming new international airport terminal.” Journal of Vibration and Shock, 30(11), pp. 260–265 (in Chinese).
Zhao, J., Xu, X. Y., Zhu, D. (2012). “Seismic responses of the hangar considering the effect of multi-dimensional inputs.” China Civil Engineering Journal, 45(S1), pp. 192–196 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Additional information
An erratum to this article is available at https://doi.org/10.1007/s13296-018-0326-1.
Rights and permissions
About this article
Cite this article
Gu, Zy., Wang, Sg., Liu, Wq. et al. Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects. Int J Steel Struct 17, 1583–1595 (2017). https://doi.org/10.1007/s13296-017-1224-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13296-017-1224-7