Abstract
The amalgamation of veterinary anatomy, technology and innovation has led to development of latest technological advancement in the field of veterinary medicine, i.e., three-dimensional (3D) imaging and reconstruction. 3D visualization technique followed by 3D reconstruction has been proven to enhance non-destructive 3D visualization grossly or microscopically, e.g., skeletal muscle, smooth muscle, ligaments, cartilage, connective tissue, blood vessels, nerves, lymph nodes, and glands. The core aim of this manuscript is to document non-invasive 3D visualization methods being adopted currently in veterinary anatomy to reveal underlying morphology and to reconstruct them by 3D softwares followed by printing, its applications, current challenges, trends and future opportunities. 3D visualization methods such as MRI, CT scans and micro-CT scans are utilised in revealing volumetric data and underlying morphology at microscopic levels as well. This will pave a way to transform and re-invent the future of teaching in veterinary medicine, in clinical cases as well as in exploring wildlife anatomy. This review provides novel insights into 3D visualization and printing as it is the future of veterinary anatomy, thus making it spread to become the plethora of opportunities for whole veterinary science.
Similar content being viewed by others
References
3D Printing in Veterinary Medicine Market Size, Share, trends and Growth Factors Analysis Report 2023-2031. https://www.insightaceanalytic.com/report/3d-printing-in-veterinary-medicine-market/15616/
Abumandour MMA, Bassuoni NF, El-Gendy S, Karkoura A, El-Bakary R (2019) Comparative Morphological Studies of the Stifle Menisci in Donkeys, Goats and Dogs. J Morphol Sci 36:72–84
AlcântaraLeiteDosReis D, Gouveia BLR, Júnior JCR, Neto ACA (2019) Comparative assessment of anatomical details of thoracic limb bones of a horse to that of models produced via scanning and 3D printing. 3D Print Med BMC 5:13. https://doi.org/10.1186/s41205-019-0050-2
Application of 3D Printing in Veterinary. Eng (2022). https://makenica.com/application-of-3d-printing-service-in-veterinary/
Augustine R (2018) Skin bioprinting: A novel approach for creating artifcial skin from synthetic and natural building blocks. Prog Biomater 7:77–92. https://doi.org/10.1007/s40204-018-0087-0
Befera NT, Badea CT, Johnson GA (2014) Comparison of 4D-MicroSPECT and MicroCT for Murine Cardiac Function. Mol Imaging Biol 16:235–245
Bozkurt Y, Karayel E (2021) 3D printing technology; methods, biomedical applications, future opportunities and trends. J Mater Res Technol 14:1430–1450
Choi S, Oh YI, Park KH, Lee JS, Shim JH, Kang BJ (2019) New clinical application of three-dimensional-printed polycaprolactone/_-tricalcium phosphate scaffold as an alternative to allograft bone for limb-sparing surgery in a dog with distal radial osteosarcoma. J Vet Med Sci 81:434–439
Degenhardt K, Wright AC, Horng D, Padmanabhan A, Epstein JA (2010) Rapid 3D phenotyping of cardiovascular development in mouse embryos by micro-CT with iodine staining. Circ Cardiovasc Imaging 3:314–322
Ding Y, Vanselow DJ, Yakovlev MA et al (2019) Computational 3D histological phenotyping of whole zebrafish by X-ray histotomography. eLife 8:e44898. https://doi.org/10.7554/eLife.44898
Dundie A, Hayes G, Scrivani S et al (2017) Use of 3D printer technology to facilitate surgical correction of a complex vascular anomaly with esophageal entrapment in a dog. J Vet Cardiol 19:196–204. https://doi.org/10.1016/j.jvc.2016.10.003
Edelmers E, Kazoka D, Bolocko K, Pilmane M (2022) Different Techniques of Creating Bone Digital 3D Models from Natural Specimens. Appl Syst Innov 5:85. https://doi.org/10.3390/asi5040085
El-Gendy SAA, Alsafy MAM, Rutland CS et al (2022) Ossa cordis and os aorta in the one-humped camel: Computed tomography, light microscopy and morphometric analysis. Microsc Res Tech 86(1):1–10. https://doi.org/10.1002/jemt.24256
Fan G, Meng Y, Zhu S, Ye M, Li M, Li F et al (2019) Three dimensional printing for laparoscopic partial nephrectomy in patients with renal tumors. Int Med Res 47(9):4324–4332. https://doi.org/10.1177/0300060519862058
Foster WK, Ford NL (2011) Investigating the effect of longitudinal micro-CT imaging on tumour growth in mice. Phys Med Biol 56:315–326
Gibson I R, David W, Stucker B (2010) Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. Springer Science + Business Media, LLC, New York, NY, USA. https://doi.org/10.1007/978-1-4419-1120-9
Goudie C, Shanahan J, Gill A (2018) Investigating the Efficacy of Anatomical Silicone Models Developed from a 3D Printed Mold for Perineal Repair Suturing Simulation. Cureus 10:e3181. https://doi.org/10.7759/cureus.3181
Goudie C, Gill A, Shanahan J (2019) Development of an Anatomical Silicone Model for Simulation-based Medical Training of Obstetric Anal Sphincter Injury Repair in Bangladesh. Cureus 11(1):e3991. https://doi.org/10.7759/cureus.3991
Gross BC, Erkal JL, Lockwood SY, Chen C, Spence DM (2014) Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Anal Chem 86(7):3240–3253
Hamilton-Bennett SE, Oxley B, Behr S (2018) Accuracy of a patient-specific 3D printed drill guide for placement of cervical transpedicular screws. Vet Surgery 47:236–242. https://doi.org/10.1111/vsu.12734
Harrysson OLA, Marcellin-Little DJ, Horn TJ (2015) Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery. JOM J Miner Met Mater Soc. 67:647–654. https://doi.org/10.1007/s11837-015-1295-x
Herdina AN, Plenk H, Benda P et al (2015) Correlative 3D-imaging of Pipistrellus penis micromorphology: Validating quantitative microCT images with undecalcified serial ground section histomorphology. J Morphol 276:695–706
Hespel AM, Wilhite R, Hudson J (2014) Invited review-applications for 3D printers in veterinary medicine. Vet Radiol Ultrasound 55:347–358
Hilton TL, Campbell N, Hosking K (2017) Additive manufacturing in orthopaedics: Clinical implications. SA Orthop J 16:63–67
Huang YH, Goldschmidt S (2022) How 3D printing can help veterinarians with surgical planning for dogs. 3D Print Med. https://doi.org/10.1186/s41205-022-00142-y
Ito T, Tanaka T, Kiyatake I, Izawa T, Furuya M, Sasai K (2023) Contrast-enhanced computed tomography and cross-sectional anatomy of the trunk in the brownbanded bamboo shark (Chiloscyllium punctatum). Anat Histol Embryol. https://doi.org/10.1111/ahe.12903
Javaid M, Haleem A (2020) 3D printing applications towards the required challenge of stem cells printing. Clin Epidemiol Global Health 8:863e7. https://doi.org/10.1016/j.cegh.2020.02.014
Javaid HM, Suman R (2019) 3D printing applications for veterinary field. Indian J Anim Hlth 58(2):171–173
Jeong B, Jung J, Park J, Jeong SM, Lee H (2016) 3D printing Bone Model for Surgical Planning of Corrective Osteotomy for Treatment of Medial Patellar Luxation in a Dog. J Vet Clin 33:385–388
Kapoor K, Singh A (2022) Veterinary anatomy teaching from real to virtual reality: An unprecedented shift during COVID-19 in socially distant era. Anat Histol Embryol 51:163–169. https://doi.org/10.1111/ahe.12783
Kartasalo K, Latonen L, Vihinen J, Visakorpi T, Nykter M, Ruusuvuor P (2018) Comparative analysis of tissue reconstruction algorithms for 3D histology. Bioinformatics 34(17):3013–3021. https://doi.org/10.1093/bioinformatics/bty210
Keklikoglou K, Faulwetter S, Chatzinikolaou E et al (2016) Micro-CT: A web based virtual gallery of biological specimens using X-ray microtomography (micro-CT). Biodivers Data J 4:e8740. https://doi.org/10.3897/BDJ.4.e8740
Keklikoglou K, Arvanitidis C, Chatzigeorgiou G et al (2021) Micro-CT for Biological and Biomedical Studies: A Comparison of Imaging Techniques. J Imaging 7:172. https://doi.org/10.3390/jimaging7090172
Klasen JRS, Thatcher GP, Bleedorn JA, Soukup JW (2022) Virtual surgical planning and 3D printing: Methodology and applications in veterinary oromaxillofacial surgery. Front Vet Sci 9:971318. https://doi.org/10.3389/fvets.2022.971318
Kolesky DB, Truby RL, Gladman AS, Busbee TA, Homan KA, Lewis JA (2014) 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs. Adv Mater 26:3124e30. https://doi.org/10.1002/adma.201305506
Lee S, Lee J, Lee A, Park N et al (2013) Augmented reality intravenous injection simulator based 3D medical imaging for veterinary medicine. Vet J 196:197–202. https://doi.org/10.1016/j.tvjl.2012.09.015
Lee V, Singh G, John P (2014) Design and Fabrication of Human Skin by Three- Dimensional Bioprinting. Tissue Eng 20:473–484. https://doi.org/10.1089/ten.TEC.2013.0335
Lee HR, Adam GO, Yang DK et al (2020) An easy and economical way to produce a three-dimensional bone phantom in a dog with antebrachial deformities. Animals 10:1445
Leonardi L, Bellezza Marsili R, E, et al (2021) A pilot study on the use of 3D printers in veterinary medicine. Braz J Vet Pathol 14(3):159–164. https://doi.org/10.24070/bjvp.1983-0246.v14i3p159-164
Lessner EJ, Holliday CM (2022) A 3D ontogenetic atlas of Alligator mississippiensis cranial nerves and their significance for comparative neurology of reptiles. Anat Rec 305:2854–2882. https://doi.org/10.1002/ar.24550
Li J, Chen M, Fan X (2016) Recent advances in bioprinting techniques: approaches, applications and future prospects. J Transl Med 14:271. https://doi.org/10.1186/s12967-016-1028-0
Li F, Liu C, Song X, Huan Y, Gao S, Jiang Z (2018) Production of accurate skeletal models of domestic animals using three dimensional scanning and printing technology. Am Assoc Anat 11:73–80. https://doi.org/10.1002/ase.1725
Liaw CY, Guvendiren M (2017) Current and emerging applications of 3D printing in medicine. Biofabrication 9:204102
Madeleine P (2022) How Veterinary Medicine Benefits From Additive Manufacturing. 1-10. https://www.3dnatives.com/en/veterinary-medicine-additive-manufacturing-221220224
Malik T C (2022). What You Need to Know About 3D Printing in Vet Medicine. https://www.prudentpet.com/3d-printing-vet-medicine/
Marouf NO, Mimoune N, Benchabane A, Khelef D, Kaidi R (2023) 3D printer uses in veterinary medicine A review. Vet Stanica 54(2):223–237
Massari C, Ferreira-Silva A, Riceti-Magalh˜aes H, Souza-Silva D, Miglino M (2021). Computed tomography examination of the os cordis in a lamb (Ovis aries Linnaeus, 1758). MVZ Cordoba 27(1): e2153. https://doi.org/10.21897/rmvz.2153
Memarian P, Sartor F, Bernardo E et al (2021) Osteogenic properties of 3D-printed silica-carbon-calcite composite scaffolds: Novel approach for personalized bone tissue regeneration. Int J Mol Sci 22:475
Memarian P, Pishavar E, Zanotti F et al (2022) Active Materials for 3D Printing in Small Animals: Current Modalities and Future Directions for Orthopedic Applications. Int J Mol Sci 23:1045. https://doi.org/10.3390/ijms23031045
Metscher BD (2009) MicroCT for developmental biology: A versatile tool for high-contrast 3D imaging at histological resolutions. Dev Dyn 238:632–640
Moittie S, Baiker K, Strong V et al (2020) Discovery of os cordis in the cardiac skeleton of chimpanzees (Pan troglodytes). Sci Rep 10(1):9417. https://doi.org/10.1038/s41598-020-66345-7
Muro S, Akita K (2023) Novel combination method of wide-range serial sectioning and 3D reconstruction visualizing both macro-level dynamics and micro-level interactions in an attempt to analyze the female pelvic floor. Anat Sci Int. https://doi.org/10.1007/s12565-023-00710-0
Nickels L (2018) Positive prognosis for 3D printed animal implants. Met Powder Rep 73:188–192. https://doi.org/10.1016/j.mprp.2018.02.036
Onar V, Chroszcz A, Poradowski D, Nazan Gezer I, Mehmet Ali P, Rahmi A (2022) Computed tomography and osteological examination of the nuchal perforations in Byzantine cattle skulls. Turkish J Vet Anim Sci 46(5):764–778. https://doi.org/10.55730/1300-0128.4251
Oxley B (2017) Bilateral shoulder arthrodesis in a Pekinese using three-dimensional printed patient specific osteotomy and reduction guides. Vet Comp Orthop Traumatol 30:230–236. https://doi.org/10.3415/VCOT-16-10-0144
Oxley B, Behr S (2016) Stabilisation of a cranial cervical vertebral fracture using a 3D-printed patient-specific drill guide. J Small Anim Pract 57:277–277. https://doi.org/10.1111/jsap.12469
Paudyal S (2017) How 3D printing is revolutionizing veterinary medicine - PreScouter - Custom Intelligence from a Global Network of Experts. https://www.prescouter.com/2017/12/3d-printing-veterinary-medicine
Pham AC, Nguyen T, Nowell CJ, Graham B, Boyd BJ (2015) Examining the gastrointestinal transit of lipid-based liquid crystalline systems using whole-animal imaging. Drug Deliv Transl Res 5:566–574
Popov VV, Muller-Kamskii G, Katz-Demyanetz A et al (2019) Additive manufacturing to veterinary practice: Recovery of bony defects after the osteosarcoma resection in canines. Biomed Eng Lett 9:97–108
Preece D, Williams SB, Lam R, Weller R (2013) Let’s Get Physical: Advantages of a physical model over 3D computer models and textbooks in learning imaging anatomy. Am Assoc Anat 6:216–224. https://doi.org/10.1002/ase.1345
Rachel EME, Ashley R, Charles V et al (2015) 3D-Printed Small-Animal Immobilizer for Use in Preclinical Radiotherapy. J Am Assoc Lab Anim Sci 54:545–548
Rasmussen P (2019) 3-D Printing Is Revolutionizing Veterinary Medicine. https://animals.howstuffworks.com/animal-facts/3d-printing-veterinary-medicine.htm
Senter-Zapata M, Patel K, Bautista PA, Griffin M, Michaelson J, Yagi Y (2016) The Role of Micro-CT in 3D Histology Imaging. Pathobiology 83:140–147. https://doi.org/10.1159/000442387
Smith CM, Curthoys IS, Mukherjee P, Wong C, Laitman JT (2022) Three-dimensional visualization of the human membranous labyrinth: The membrane limitans and its role in vestibular form. The Anat Rec 305(5):1037–1050. https://doi.org/10.1002/ar.24675
Steiner L, Synek A, Pahr DH (2020) Comparison of different microCT-based morphology assessment tools using human trabecular bone. Bone Rep 12:100261
Tahara R, Larsson HCE (2013) Quantitative analysis of microscopic X-ray computed tomography imaging: Japanese quail embryonic soft tissues with iodine staining. J Anat 223:297–310
Tasnim N, Vega LDL, Kumar SA et al (2018) 3D bioprinting stem cell derived tissues. Cell Mol Bioeng 11:219e40. https://doi.org/10.1007/s12195-018-0530-2
Turgut N, Bahar S, Kılınçer A (2022) CT and cross-sectional anatomy of the paranasal sinuses in the Holstein cow. Vet Radiol Ultrasound. https://doi.org/10.1111/vru.13166
Urata S, Okabe S (2023) Three-dimensional mouse cochlea imaging based on the modified Sca/eS using confocal microscopy. Anat Sci Int. https://doi.org/10.1007/s12565-023-00703-z
Van Epps A, Huston D, Sherrill J, Alvar A, Bowen A (2015) How 3D printers support teaching in engineering technology and beyond. Bull J Assoc Inf Sci Technol 42:16–20. https://doi.org/10.1002/bul2.2015.1720420107
Vaughan D (2018) 3-Dimensional Printing in Veterinary Medicine. Am Vet 3(2):171
Vladimir V, Popov JR, Muller-Kamskii G et al (2019) Additive manufacturing to veterinary practice: Recovery of bony defects after the osteosarcoma resection in canines. Biomed Eng Lett 9:97–108. https://doi.org/10.1007/s13534-018-00092-7
Wilhite R, Wölfel I (2019) 3D Printing for veterinary anatomy: An overview. Anat Histol Embryol 48:609–620. https://doi.org/10.1111/ahe.12502
Wong KC (2016) 3D-printed receiver-specific applications in orthopedics. Orthop Res Rev 8:57–66
Wong KV, Hernandez A (2012) A review of additive manufacturing. ISRN Mech Eng 10:208760. https://doi.org/10.5402/2012/208760
Wu J, Xie L, Lin XZY, Chen Q (2017) Biomimetic nanofibrous scaffolds for neural tissue engineering and drug development. Drug Discov Today 9:1375e84. https://doi.org/10.1016/j.drudis.2017.03.007
Wulster K (2022) Use of 3D printing in veterinary medicine VMD Dip. ACVR Assistant Professor of Large Animal Diagnostic Imaging New Bolton Center. Univ Pa 69:111
Zein NN, Hanouneh LA, Bishop PD et al (2013) Three-dimensional print of a liver for preoperative planning in living donor liver transplantation. Liver Transpl 19:1304e10. https://doi.org/10.1002/lt.23729
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
There is no conflict of interest in the present form of the manuscript.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kapoor, K. 3D visualization and printing: An “Anatomical Engineering” trend revealing underlying morphology via innovation and reconstruction towards future of veterinary anatomy. Anat Sci Int 99, 159–182 (2024). https://doi.org/10.1007/s12565-023-00755-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12565-023-00755-1