Abstract
Heat treatment of stone for tool making has important implications for our understanding of the early human history of the Australian continent. New data on the antiquity of Australian heat treatment and its evolution through time in different regions have posed questions about the origin and temporal stability of technical practices. In this paper, we present the first evolutionary sequence of the use of heat treatment in Central Australia, with a trend to lower levels of heat treatment over time. Different trends are found in other regions across Australia: on the eastern seaboard, heat treatment became more prevalent over time, while in the inland, semi-arid Willandra lakes region heat treatment gradually disappeared over time. In central Australia, the long-term trend is towards fewer heat-affected specimens over time, but this happens in a single transition from stable high levels in the Pleistocene to stable moderate levels in the Mid- to Late Holocene. These evolutionary trends are consistent with regional diversification, reflecting adaptations to local conditions, and are not consistent with technological uniformity across the continent.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Stone heat treatment for tool knapping plays an increasingly important role in our understanding of early modern behaviours (Sealy 2009), technological complexity (Stolarczyk and Schmidt 2018) and cognitive processing (Wadley 2013). The earliest examples involve continental rock silcrete and date to the second half of the southern African Middle Stone Age (Brown et al. 2009; Schmidt et al. 2020). Silcrete is also an important rock for making artefacts in Australia and early silcrete heat treatment may be of similar importance there. While the research on heat treatment has a comparatively long history in Australia (see among others Flenniken and White 1983; Hanckel 1985), we still know relatively little about the evolution of its prevalence in different regions. Recently, two studies, on a 25-ka-long sequence in the Sydney area (Schmidt and Hiscock 2019) and on the ~ 40-ka-long sequence at Lake Mungo and the Willandra lakes (Schmidt and Hiscock 2020), uncovered an intriguing picture. On the eastern seaboard, the proportion of all silcrete artefacts that were heat-treated rose continuously from around 25 ka BP to its largest values in the terminal Holocene. The opposite happened in the semi-arid environment of the Willandra Lakes, where heat treatment in the oldest assemblages was prevalent and evolved continuously towards very low values through time. This observation reveals there is no continent-wide evolutionary trend, but instead a series of local ones, posing questions about how heat treatment evolved in other regions and what causes the different evolutionary pathways? To pursue these questions, we conducted a similar study on a third region, in Central Australia, where we examined two sites with long sequences: Puritjarra Rock Shelter and Kulpi Mara (locations in Online Resource Fig. S1). These two sites offer a key window onto the Pleistocene occupation of the arid centre of Australia.
Methods and materials
The Puritjarra deposits yielded three geological layers I, II and III, although only I and II produced artefacts (Smith 2006). Within those two layers, Smith (2006) constructed analytical units: 1a, 1b, 1c, 2a, 2b and 2c (2c represents the base of the sequence at > 32 ka BP). We only found silcrete artefacts in units 1a to 2a (ages summarised in Table 1). Of those, we inspected all > 3 mm from squares: M10, 11 and N5, 9, 10, 11, 12, 13, 18 (these are the squares that were excavated down through the site’s entire sequence). We aimed to analyse 100 pieces per analytical unit, but we did not want to arbitrarily select the specimens for analysis, and so when an excavation bag contained more than 100 pieces, we analysed them all, producing slightly higher counts in the upper units. This did not occur in unit 1c and below as the lower units had fewer silcrete artefacts. At Kulpi Mara (KM) Rock Shelter 13, we analysed the three layers excavated by Thorley (1998). This sequence dates back to at least 30–35 kya, with much higher chronological resolution in the Pleistocene levels than in the Holocene (ages summarised in Table 1). All silcrete artefacts > 3 mm from KM 13 were analysed.
Methods used to assess the quantity of heat-treated artefacts are described in detail in Schmidt (2019) and in the Online Resource file. In brief, we employ two steps: (1) a visual classification of heating proxies distinguishing pre-heating removal scars (Fig. 1a, f), which are fracture scars resulting from knapping of unheated silcrete, from post-heating removal scars (Fig. 1b, e), which result from knapping of heat-treated silcrete. This distinction is based on identifying what we call diagnostic pieces, which are artefacts that contain pre- and post-heating scars documenting pre- and post-heating knapping on a single artefact. Artefacts that have only one type of scars are then compared with the known scars on diagnostic pieces to decide whether these are pre- or post-heating scars. The second step (2) consisted of making surface roughness measurements on some artefacts to verify the visual classification, using the replica tape method (Schmidt 2019). This non-destructive method produces quantitative values on the surface roughness of fracture scars, allowing to identify them as either pre- or post-heating scars. Graphs produced by replica tape roughness measurements display two statistics (extracted from the raw roughness data): natural logarithm of mean roughness Ln(Ra) and the information entropy (S) of the surface height distribution which expresses disorder in the roughness profile. Both values are displayed in plots so that rougher fracture scars from knapping unheated silcrete plot in the upper right corner and smoother scars from knapping of heated silcrete in the lower left ( Fig. S2). This was done for 70 silcrete artefacts from analytical unit 1a at Puritjarra. If the results of our visual classification and replica tape measurement for this unit are comparable, we will conclude that our visual classification on our overall sample is likely to be robust with minimal misclassification.
Results and discussion
Our visual classification of heating proxies on silcrete artefacts reveals robust evolutionary trends in the use of heat treatment in Central Australia. The results are presented in Table 1, data on heat-treated flakes and retouched artefacts are in the online resource file. Only a small proportion of specimens were indeterminate during visual inspection, 6% at Puritjarra (n = 18) and 15% at Kulpi Mara (n = 21). The relative abundance of diagnostic pieces in this analysis is comparable to previously published values from similar studies in Australia (Schmidt and Hiscock 2019; Schmidt and Hiscock 2020). An indicator of the quality of our visual classification comes from the replica tape analysis of 70 silcrete artefacts from Puritjarra unit 1a. Raw data obtained by this analysis are summarised in Table S1 of the Online Resource and graphically shown in Fig. 2. Of 70 specimens, 39 (55.7%) were found to be heat-treated, while 30 of 70 pieces (42.9%) were found to be unheated, with only 1 (1.4%) indeterminate. This is in agreement with our visual classification of heat-treated pieces in unit 1a that resulted in 48% heat-treated and 51% unheated pieces. Greater agreement between replica tape and visual classifications was reported in previous studies (Schmidt and Hiscock 2019; Schmidt and Hiscock 2020) but our data from both approaches still agree within less than 10%. The quality of this replica tape roughness data is expressed by the mean distance of all test data dots from their fitted function in Euclidean distance in the scatter plot. It is 0.029. This value is in good agreement with previous studies (0.022 as recalculated from Schmidt (2019); 0.02 from Schmidt and Hiscock (2019) and 0.027 from Schmidt and Hiscock (2020)). Thus, our estimation of heat-treated pieces throughout the sequences at Puritjarra and Kulpi Mara can be regarded as correct within less than 10%.
An evolutionary trend in heat treatment of silcrete artefacts at Puritjarra and Kulpi Mara is clear (Fig. 3). Pleistocene assemblages consistently had higher levels of heat-treated artefacts than Holocene assemblages. The trend line is shown in Fig. 3b, with Pleistocene levels having 65–75% heat treated while later levels have 45–55% (a difference greater than the 10% measurement error). The frequency of heat treatment in these two time periods is significantly different (t = 7.566, d.f. = 5, p = 0.001), and within each period the frequencies display consistent levels of heat treatment: either high (in the Pleistocene or very early Holocene) or lower (in that later Holocene). We conclude that heat treatment was consistently used throughout the 35,000 years sequences available from Central Australia but was emphasised more in the Pleistocene. Declining rates of heat treatment are present and strong in both sequences, although the decline is slightly more pronounced at Puritjarra than at Kulpi Mara.
There are three noteworthy points about the evolution of silcrete heat treatment practices in Central Australia. The first is that the evolutionary trend in the Centre is not identical with those described from other regions within the continent, illustrating the local responsiveness of cultural systems in Australia to regionally different selective pressures. In Central Australia, the two long-term sequences we present here demonstrate persistent and moderately frequent use of heat treatment on worked silcrete for more than 35 ka, but they also reveal clear reduction over time in the use of heat treatment in stone working, from high to moderate levels of treated artefacts. However, the reduction over time in Central Australia, while statistically significant, is not as dramatic as it was in the semi-arid landscape of the Willandra Lakes, 750 km to the east. There, silcrete heat treatment frequencies reduced from similar Pleistocene rates to very low rates in the Holocene (at 42 ka, > 60% of the silcrete was heated, in the terminal Holocene < 10%, see Schmidt and Hiscock 2020). Hence, while Central Australia and the Willandra region shared a direction of evolutionary change, heat treatment remained a common practice in the centre of the continent, whereas in the Willandra, it became a rare element in the knapping repertoire. A quite different trend is evident on the south-eastern seaboard of Australia, where a sequence spanning over the past 25 ka documented an increasing prevalence of heat treatment through time (at 25 ka, 50% of all silcrete was heated; in the terminal Holocene > 80%, see Schmidt and Hiscock 2019). Variation in direction and magnitude between these regions demonstrates that there was no uniformity in the evolution of these practices over time, but rather there was geographical diversification in technological practices, from relatively similar heat treatment frequencies in the older periods (i.e. 25–35 ka) to extremely different rates of heat treatment in each region in the Late Holocene.
A second point about the heat treatment in Central Australia is that current data indicate two distinct phases, each varying little over time but with a small (though significant) change from one phase to another. Figure 3 b plots the regional sequence using the age mid-point of stratigraphic units, making the timing of assemblages appear precise, but the units in Puritjarra are not well defined chronologically (compare Fig. 3a). Hence, the boundary between the two phases is currently not well defined, largely because of uncertainty in dating unit 2a at Puritjarra. Our data do not preclude that the switch between phases might correspond to the Pleistocene/Holocene transition and be associated with economic shifts at that time. However, the evidence is not clear on that point.
Nevertheless, the evidence supports the idea that the evolutionary trend involved a single switch between technological systems that were stable over the long term. We suggest the selective context that elicited that state switch may have involved altered costs of raw material procurement, perhaps associated with alterations in the pattern or timing of foraging trips, or even altered tooling strategies. Similarly, there is no good evidence for an association between the trend in heat treatment and alterations in technology. In discussing Puritjarra, Smith (2006) argues that core reduction and flaking methods were similar throughout the sequence while he sees shifts in raw material procurement and implements typology only in the Late Holocene. A metrical study of retouching by Law (2009) concluded that reduction intensity also increased in the Late Holocene. None of those technological shifts correspond with the earlier state switch in heat treatment, indicating that heat treatment and specific technological patterns are not tightly associated in Central Australia. More economic and technological data from the region would be required to construct detailed models but current evidence indicates the evolutionary trend in Central Australian heat treatment is not simply linked to particular technological treatments.
The third point we can make is that it might be possible to explain at least some aspects of the heat treatment-related patterns in different regions by the availability of other raw materials. Besides silcrete, Puritjarra and Kulpi Mara yielded a consistent amount of chert throughout their sequences (Smith 2006; Thorley 1998). It has been argued that chert heat treatment requires different conditions than silcrete (compare Schmidt et al. 2017; Schmidt et al. 2016) but it is also possible that the presence of chert along with silcrete had an influence on the prevalence of silcrete heat treatment (this argument has been made in another context, see Schmidt and Mackay 2016). Furthermore, if chert was also heat treated in central Australia, changing silcrete heat treatment practices might be understood in the context of the procurement, heat treatment and usage of this material. When sorting artefacts from Puritjarra and Kulpi Mara, we observed the presence of heat-treated chert as well as silcrete (Fig. 4). We identified chert artefacts with diagnostic contrast between rough and smooth pre- and post-heating scars throughout the sequences at both sites, providing evidence that part of the chert component at both Central Australian sites was heat treated. This was unexpected, as none of the other two Australian sequences mentioned above (Schmidt and Hiscock 2019; Schmidt and Hiscock 2020) had provided evidence of chert heat treatment. The implications of this finding should be the subject of a dedicated study on chert heat treatment but it appears clearly that the cost of obtaining, and success in modifying, alternate lithic material will help us understand the economic context of silcrete heat treatment.
Conclusion and implications
In Central Australia, the reduction over time in the rate of heat treatment practices is a sequence that offers us new insights into technological evolution and regional diversification within Australia. In the past, models of technology in Australia commonly depicted uniformity and simplicity at earlier (Pleistocene) times, and regional differentiation in technology or culture was often understood as mid- or later Holocene (Hiscock 2008). While this may be true for heat treatment in some regions (see for example Maloney and Street 2020), our findings explore these concerns about uniformity, regionalism and chronology with surprising results. This paper reports on the third of three regional sequences of heat treatment spanning into the Pleistocene that is now known from Australia (Schmidt and Hiscock 2019; Schmidt and Hiscock 2020). We know that the sequence of heat treatment is different for each region, diverging over time, in response to differing conditions in each locality. Since the evolutionary trend in Central Australia is not identical with those described from other regions within the continent, we conclude there is no continental pattern shared by them. The regional patterns are distinct with heat treatment practices changing in opposite directions: increasing in some regions and decreasing in others. What is shared is that regional diversification in evolutionary trends was of substantial time depth, being initiated and distinct by the terminal Pleistocene at the very least. This indicates that technological reorganisation, and the development of different trajectories of technological evolution, was occurring over extended time periods. We have also shown that heat treatment practices in each region evolved at different rates, presumably in response to local selective pressures. While Schmidt and Hiscock (2019) showed that there was a reasonably continuous change on the eastern seaboard, this paper has demonstrated a stadial pattern in Central Australia, with current data indicating two distinct phases, each varying little over time but with a significant change from one phase to another. This reveals that not only is there evidence for long-term regional diversification of technology, in different directions and to different degrees but also that those evolutionary patterns happened at regionally different rates, implying not only different selective pressures but perhaps also different articulations of the technological systems in each region. These observations highlight the diversity of temporal trajectories of lithic technology in different regions across Australia. They call for more expansive investigations of other heat treatment-related behaviours on the continent, including research into the techniques that were used for heat treating rock and the relative costs and benefits of the investment it represented.
Change history
17 May 2022
A Correction to this paper has been published: https://doi.org/10.1007/s12520-022-01562-x
References
Brown KS, Marean CW, Herries AI, Jacobs Z, Tribolo C, Braun D, Roberts DL, Meyer MC, Bernatchez J (2009) Fire as an engineering tool of early modern humans. Science 325:859–862
Flenniken JL, White JP (1983) Heat treatment of siliceous rocks and its implication for Australian prehistory Australian Aboriginal Studies 1:p. 43-48
Hanckel M (1985) Hot rocks: heat treatment at Burrill Lake and Currarong. New South Wales Archaeology in Oceania 20:98–103
Hiscock P (2008) Archaeology of ancient Australia. Routledge, London
Law WB (2009) Measured on stone: stone artefact reduction, residential mobility, and aboriginal land use in arid Central Australia. British ARchaeological Reports, Oxford
Maloney TR, Street M (2020) Hot debate: Identifying heat treatment in Australian archaeology using science and modern indigenous knowledge. Quaternary Sci Rev 241:106431. https://doi.org/10.1016/j.quascirev.2020.106431
Schmidt P (2019) How reliable is the visual identification of heat treatment on silcrete? A quantitative verification with a new method. Archaeol Anthropol Sci 11:713–726. https://doi.org/10.1007/s12520-017-0566-6
Schmidt P, Hiscock P (2019) Evolution of silcrete heat treatment in Australia - a regional pattern on the south-east coast and its evolution over the last 25 ka. J Paleolithic Archaeol 2:74–97
Schmidt P, Hiscock P (2020) The antiquity of Australian silcrete heat treatment: Lake Mungo and the Willandra Lakes. Journal of Human Evolution accepted for publication 08/01/2020
Schmidt P, Mackay A (2016) Why was silcrete heat-treated in the middle stone age? An early transformative technology in the context of raw material use at Mertenhof Rock Shelter, South Africa. PLoS ONE 11:e0149243. https://doi.org/10.1371/journal.pone.0149243
Schmidt P, Paris C, Bellot-Gurlet L (2016) The investment in time needed for heat treatment of flint and chert. Archaeol Anthropol Sci 8:839–848
Schmidt P, Lauer C, Buck G, Miller CE, Nickel KG (2017) Detailed near-infrared study of the ‘water’-related transformations in silcrete upon heat treatment. Phys Chem Miner 44:21–31. https://doi.org/10.1007/s00269-016-0833-6
Schmidt P, Stynder D, Conard N, Parkington J (2020) When was silcrete heat treatment invented in South Africa? Palgrave Communications accepted for publication 31/03/2020 6. https://doi.org/10.1057/s41599-020-0454-z
Sealy J (2009) Modern behaviour in ancient south Africans: evidence for the heat treatment of stones in the Middle Stone Age. S Afr J Sci 105:323–324
Smith MA (2006) Characterizing Late Pleistocene and Holocene Stone Artefact assemblages from Puritjarra Rock Shelter: a long sequence from the Australian Desert. Rec Aust Mus 58:371–410
Stolarczyk RE, Schmidt P (2018) Is early silcrete heat treatment a new behavioural proxy in the Middle Stone Age? PLoS One 13:e0204705
Thorley PB (1998) Shifting location, shifting scale: a regional landscape approach to the prehistoric archaeology of the Palmer River catchment, Central Australia Northern Territory University, PhD Thesis, Darwin
Wadley L (2013) Recognizing complex cognition through innovative technology in Stone Age and Palaeolithic Sites. Camb Archaeol J 23:163–183
Acknowledgements
We are thankful to the Museum and Art Gallery of the Northern Territory in Darwin for permission to access and study the collections and to Rebecca Mirams for all her help and assistance during data analysis.
Funding
Financial support for this study was provided by the Deutsche Forschungsgemeinschaft (DFG) (grant number SCHM 3275/2-1) and by the Tom Austen Brown Endowment, University of Sydney. Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interests.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The original online version of this article was revised: The article “Early silcrete heat treatment in Central Australia: Puritjarra and Kulpi Mara”, written by Patrick Schmidt and Peter Hiscock, was originally published electronically on the publisher’s internet portal on July 24, 2020 without open access. With the author(s)’ decision to opt for Open Choice, the copyright of the article changed on September 22, 2021 to © The Author(s) 2021 and the article is forthwith distributed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. Open Access funding enabled and organized by Projekt DEAL.
The original article has been corrected.
Electronic supplementary material
ESM 1
(PDF 727 kb)
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Schmidt, P., Hiscock, P. Early silcrete heat treatment in Central Australia: Puritjarra and Kulpi Mara. Archaeol Anthropol Sci 12, 188 (2020). https://doi.org/10.1007/s12520-020-01163-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12520-020-01163-6