Abstract
An essential aspect of a closed-loop supply chain (CLSC) involves its optimization. In this context, systematizing the publications on optimization methods applied in CLSC constitutes this research's primary objective. In this sense, a comprehensive literature review was carried out on 354 papers published from January 2008 to October 2020 to find future directions involving CLSC optimization. It was found stochastic methods are the primary approach in the studies regarding CLSC optimization, being applied in 27.68% of the publications investigated, while hybrid methods appeared in 21.75%, and deterministic methods were used in 20.62%. It was verified that 49.71% of the publications were related exclusively to strategic decisions concerning organizational decision-making levels, 22.03% analyzed tactical decisions, and 13.56% studied operational aspects. Regarding the sustainability dimensions, it was found that only the economic dimension was investigated in 70.62% of the analyzed publications. The three dimensions (economic, environmental, and social) were investigated simultaneously in only 6.21% of the publications. As the main conclusion, a lack of research covering the whole spectrum of the CLSC environment was found, comprising the various levels of organization decisions and sustainability dimensions of the triple bottom line.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Aalirezaei A, Shokouhyar S (2017) Designing a sustainable recovery network for waste from electrical and electronic equipment using a genetic algorithm. Int J Environ Sustain Dev 16:60–79. https://doi.org/10.1504/IJESD.2017.10001371
Abdollahi M (2010) Perspectives of science in Iran. Iran J Pharm Res 9:207–208
Afshari H, Sharafi M, ElMekkawy TY, Peng Q (2016) Multi-objective optimisation of facility location decisions within integrated forward/reverse logistics under uncertainty. Int J Bus Perform Supply Chain Model 8:250–276. https://doi.org/10.1504/IJBPSCM.2016.078565
Agrawal S, Singh RK, Murtaza Q (2015) A literature review and perspectives in reverse logistics. Resour Conserv Recycl 97:76–92. https://doi.org/10.1016/j.resconrec.2015.02.009
Agrawal VV, Ferguson M, Souza GC (2016) Trade-in rebates for price discrimination and product recovery. IEEE Trans Eng Manag 63:326–339. https://doi.org/10.1109/TEM.2016.2574244
Ahranjani AR, Seifbarghy M, Bozorgi-amiri A, Najafi E (2018) Closed-loop supply chain network design for the paper industry : a multi-objective stochastic robust approach. Sci Iran Trans E Ind Eng 25:2881–2903. https://doi.org/10.24200/sci.2017.4464
Akçali E, Çetinkaya S (2011) Quantitative models for inventory and production planning in closed-loop supply chains. Int J Prod Res 49:2373–2407. https://doi.org/10.1080/00207541003692021
Alegoz M, Kaya O (2017) Coordinated dispatching and acquisition fee decisions for a collection center in a reverse supply chain. Comput Ind Eng 113:475–486. https://doi.org/10.1016/j.cie.2017.09.039
Alfonso-Lizarazo EH, Montoya-Torres JR, Gutiérrez-Franco E (2013) Modeling reverse logistics process in the agro-industrial sector: the case of the palm oil supply chain. Appl Math Model 37:9652–9664. https://doi.org/10.1016/j.apm.2013.05.015
Alimoradi A, Yussuf RM, Ismail NB, Zulkifli N (2015) Developing a fuzzy linear programming model for locating recovery facility in a closed loop supply chain. Int J Sustain Eng 8:122–137. https://doi.org/10.1080/19397038.2014.906514
Alkahtani M, Ziout A (2019) Design of a sustainable reverse supply chain in a remanufacturing environment: a case study of proton-exchange membrane fuel cell battery in Riyadh. Adv Mech Eng 11(4):1–14. https://doi.org/10.1177/1687814019842997
Altmann M, Bogaschewsky R (2014) An environmentally conscious robust closed-loop supply chain design. J Bus Econ 84:613–637. https://doi.org/10.1007/s11573-014-0726-4
Amalnick MS, Saffar MM (2017) A new fuzzy mathematical model for green supply chain network design. Int J Ind Eng Comput 8:45–70. https://doi.org/10.5267/j.ijiec.2016.7.003
Amaro ACS, Barbosa-Póvoa APFD (2009) The effect of uncertainty on the optimal closed-loop supply chain planning under different partnerships structure. Comput Chem Eng 33:2144–2158. https://doi.org/10.1016/j.compchemeng.2009.06.003
Amin SH, Baki F (2017) A facility location model for global closed-loop supply chain network design. Appl Math Model 41:316–330. https://doi.org/10.1016/j.apm.2016.08.030
Amin SH, Zhang G (2013a) A three-stage model for closed-loop supply chain configuration under uncertainty. Int J Prod Res 51:1405–1425. https://doi.org/10.1080/00207543.2012.693643
Amin SH, Zhang G (2013b) A multi-objective facility location model for closed-loop supply chain network under uncertain demand and return. Appl Math Model 37:4165–4176. https://doi.org/10.1016/j.apm.2012.09.039
Amin SH, Zhang G (2012) A proposed mathematical model for closed-loop network configuration based on product life cycle. Int J Adv Manuf Technol 58:791–801. https://doi.org/10.1007/s00170-011-3407-2
Amin SH, Zhang G, Akhtar P (2017) Effects of uncertainty on a tire closed-loop supply chain network. Expert Syst Appl 73:82–91. https://doi.org/10.1016/j.eswa.2016.12.024
Amir MFF, Gholian-Jouybari F, Mohammad MP, Mostafa HK (2017) A bi-objective stochastic closed-loop supply chain network design problem considering downside risk. Ind Eng Manag Syst 16:342–362. https://doi.org/10.7232/iems.2017.16.3.342
As’Ad R, Hariga M, Alkhatib O (2019) Two stage closed loop supply chain models under consignment stock agreement and different procurement strategies. Appl Math Model 65:164–186. https://doi.org/10.1016/j.apm.2018.08.007
Ashayeri J, Ma N, Sotirov R (2015) The redesign of a warranty distribution network with recovery processes. Transp Res Part E Logist Transp Rev 77:184–197. https://doi.org/10.1016/j.tre.2015.02.017
Asif R (2011) Reverse logistics: RFID the key to optimality. J Ind Eng Manag 4:281–300. https://doi.org/10.3926/jiem.2011.v4n2.p281-300
Atabaki MS, Khamseh AA, Mohammadi M (2019) A priority-based firefly algorithm for network design of a closed-loop supply chain with price-sensitive demand. Comput Ind Eng 135:814–837. https://doi.org/10.1016/J.CIE.2019.06.054
Aydin R, Kwong CK, Ji P (2016) Coordination of the closed-loop supply chain for product line design with consideration of remanufactured products. J Clean Prod 114:286–298. https://doi.org/10.1016/j.jclepro.2015.05.116
Aziziankohan A, Jolai F, Khalilzadeh M, Soltani R, Tavakkoli-Moghaddam R (2017) Green supply chain management using the queuing theory to handle congestion and reduce energy consumption and emissions from supply chain transportation fleet. J Ind Eng Manag 10:213–236. https://doi.org/10.3926/jiem.2170
Babazadeh R, Torabi SA (2018) An adjusted robust optimization method to an integrated production-distribution planning problem in closed-loop supply chains under uncertainty. Int J Inf Manag Sci 29:1–33. https://doi.org/10.6186/IJIMS.2018.29.1.1
Baptista S, Barbosa-Póvoa AP, Escudero LF, Gomes MI, Pizarro C (2019) On risk management of a two-stage stochastic mixed 0–1 model for the closed-loop supply chain design problem. Eur J Oper Res 274(1):91–107. https://doi.org/10.1016/j.ejor.2018.09.041
Badri H, Ghomi SMTF, Hejazi TH (2017) A two-stage stochastic programming approach for value-based closed-loop supply chain network design. Transp Res Part E Logist Transp Rev 105:1–17. https://doi.org/10.1016/j.tre.2017.06.012
Banasik A, Kanellopoulos A, Claassen GDH, Bloemhof-Ruwaard JM, van der Vorst JGAJ (2017) Closing loops in agricultural supply chains using multi-objective optimization: a case study of an industrial mushroom supply chain. Int J Prod Econ 183:409–420. https://doi.org/10.1016/j.ijpe.2016.08.012
Barbosa-Póvoa AP, Silva C, Carvalho A (2018) Opportunities and challenges in sustainable supply chain: an operations research perspective. Eur J Oper Res 268:399–431. https://doi.org/10.1016/j.ejor.2017.10.036
Bazan E, Jaber MY, Zanoni S (2017) Carbon emissions and energy effects on a two-level manufacturer-retailer closed-loop supply chain model with remanufacturing subject to different coordination mechanisms. Int J Prod Econ 183:394–408. https://doi.org/10.1016/j.ijpe.2016.07.009
Beamon BM (1999) Designing the green supply chain. Logist Inf Manag 12:332–342. https://doi.org/10.1108/09576059910284159
Bhattacharya R (2016) A closed loop supply chain game between a supplier and a manufacturer in a two-stage scenario. Int J Logist Syst Manag 23:445–475. https://doi.org/10.1504/IJLSM.2016.075209
Bhattacharya R, Kaur A (2015) Allocation of external returns of different quality grades to multiple stages of a closed loop supply chain. J Manuf Syst 37:692–702. https://doi.org/10.1016/j.jmsy.2015.01.004
Bhattacharya R, Kaur A, Amit RK (2018) Price optimization of multi-stage remanufacturing in a closed loop supply chain. J Clean Prod 186:943–962. https://doi.org/10.1016/j.jclepro.2018.02.222
Bisheh MN, Delavari M, Malmir B (2018) Role of third-party companies in a sustainable supply chain design. Int J Logist Syst Manag 30:95. https://doi.org/10.1504/IJLSM.2018.091449
Bo Y, Wang Y, Zhong W, Zhi-Chun L (2019) Optimizing the WEEE recovery network associated with environmental protection awareness and government subsidy by nonlinear mixed integer programming. J Adv Transp 2019:9858670. https://doi.org/10.1155/2019/9858670
Bottani E, Casella G (2018) Minimization of the environmental emissions of closed-loop supply chains: a case study of returnable transport assets management. Sustainability 10:329. https://doi.org/10.3390/su10020329
Bottani E, Montanari R, Rinaldi M, Vignali G (2015) Modeling and multi-objective optimization of closed loop supply chains: A case study. Comput Ind Eng 87:328–342. https://doi.org/10.1016/j.cie.2015.05.009
Brocke J vom, Simons A, Niehaves B, Niehaves B, Reimer K, Plattfaut R, Cleven A (2009) Reconstructing the giant: on the importance of rigour in documenting the literature search process. In: European conference on information systems, pp 13
Calık A, Pehlivan NY, Paksoy T, Weber GW (2018) A novel interactive fuzzy programming approach for optimization of allied closed-loop supply chains. Int J Comput Intell Syst 11:672–691. https://doi.org/10.2991/ijcis.11.1.52
Calmon AP, Graves SC (2017) Inventory management in a consumer electronics closed-loop supply chain. Manuf Serv Oper Manag 19:568–585. https://doi.org/10.1287/msom.2017.0622
Chen JM, Chang CI (2012) The economics of a closed-loop supply chain with remanufacturing. J Oper Res Soc 63:1323–1335. https://doi.org/10.1057/jors.2011.142
Chen M, Liu Y, Song Y, Sun Q (2019) A contract coordination model of dual-channel delivery between UAVs and couriers considering the uncertainty of delivery for last mile. Discrete Dyn Nat Soc 2019:1–11. https://doi.org/10.1155/2019/6214359
Chen W, Kucukyazici B, Verter V, Sáenz MJ (2015a) Supply chain design for unlocking the value of remanufacturing under uncertainty. Eur J Oper Res 247:804–819. https://doi.org/10.1016/j.ejor.2015.06.062
Chen YJ, Liu DB, Mao HW, Zhang ZQ (2012) The uncertain programming of the closed-loop supply chain with remanufacturing system. Appl Mech Mater 190–191:218–221. https://doi.org/10.4028/www.scientific.net/AMM.190-191.218
Chen YT, Chan FTS, Chung SH (2015b) An integrated closed-loop supply chain model with location allocation problem and product recycling decisions. Int J Prod Res 53:3120–3140. https://doi.org/10.1080/00207543.2014.975849
Chen YT, Chan FTS, Chung SH, Park WY (2018) Optimization of product refurbishment in closed-loop supply chain using multi-period model integrated with fuzzy controller under uncertainties. Robot Comput Integr Manuf 50:1–12. https://doi.org/10.1016/j.rcim.2017.05.005
Chen YW, Wang LC, Wang A, Chen TL (2017) A particle swarm approach for optimizing a multi-stage closed loop supply chain for the solar cell industry. Robot Comput Integr Manuf 43:111–123. https://doi.org/10.1016/j.rcim.2015.10.006
Cheraghalipour A, Paydar MM, Hajiaghaei-Keshteli M (2018) A bi-objective optimization for citrus closed-loop supply chain using Pareto-based algorithms. Appl Soft Comput 69:33–59. https://doi.org/10.1016/j.asoc.2018.04.022
Chern CC, Lei ST, Huang KL (2014) Solving a multi-objective master planning problem with substitution and a recycling process for a capacitated multi-commodity supply chain network. J Intell Manuf 25:1–25. https://doi.org/10.1007/s10845-012-0667-0
Chopra S, Meindl P (2010) Supply chain management: Strategy, planning and operation, 4th edn. Pearson Prentice Hall Inc, Englewood Cliffs
Chung WH, Kremer GEO, Wysk RA (2014a) A modular design approach to improve product life cycle performance based on the optimization of a closed-loop supply chain. J Mech Des 136:021001. https://doi.org/10.1115/1.4025022
Chung WH, Okudan KGE, Wysk RA (2014b) Life cycle implications of product modular architectures in closed-loop supply chains. Int J Adv Manuf Technol 70:2013–2028. https://doi.org/10.1007/s00170-013-5409-8
Coenen J, van der Heijden RECM, van Riel ACR (2018) Understanding approaches to complexity and uncertainty in closed-loop supply chain management: past findings and future directions. J Clean Prod 201:1–13. https://doi.org/10.1016/j.jclepro.2018.07.216
CSCMP (2019) Supply chain management definitions and glossary [WWW Document]. URL https://cscmp.org/CSCMP/Educate/SCM_Definitions_and_Glossary_of_Terms/CSCMP/Educate/SCM_Definitions_and_Glossary_of_Terms.aspx?hkey=60879588-f65f-4ab5-8c4b-6878815ef921
Cui YY, Guan Z, Saif U, Zhang L, Zhang F, Mirza J (2017) Close loop supply chain network problem with uncertainty in demand and returned products: genetic artificial bee colony algorithm approach. J Clean Prod 162:717–742. https://doi.org/10.1016/j.jclepro.2017.06.079
Dai Z (2016) Multi-objective fuzzy design of closed-loop supply chain network considering risks and environmental impact. Hum Ecol Risk Assess An Int J 22:845–873. https://doi.org/10.1080/10807039.2015.1113852
Dai Z, Dai H (2016) Bi-objective closed-loop supply chain network design with risks in a fuzzy environment. J Ind Prod Eng 33:169–180. https://doi.org/10.1080/21681015.2015.1126655
Dai Z, Li Z (2017) Design of a dynamic closed-loop supply chain network using fuzzy bi-objective linear programming approach. J Ind Prod Eng 34:330–343. https://doi.org/10.1080/21681015.2017.1305994
Dai Z, Zheng X (2015) Design of close-loop supply chain network under uncertainty using hybrid genetic algorithm: A fuzzy and chance-constrained programming model. Comput Ind Eng 88:444–457. https://doi.org/10.1016/j.cie.2015.08.004
Darbari J, Kannan D, Agarwal V, Jha P (2019) Fuzzy criteria programming approach for optimising the TBL performance of closed loop supply chain network design problem. Ann of Oper Res 273(1):693–738. https://doi.org/10.1007/s10479-017-2701-2
Darestani AS, Pourasadollah F (2019) A Multi-Objective Fuzzy Approach to Closed-Loop Supply Chain Network Design with Regard to Dynamic Pricing. Journal Optim Ind Eng 12(1):173–194. https://doi.org/10.22094/JOIE.2018.476.0
Das D, Dutta P (2015) Design and analysis of a closed-loop supply chain in presence of promotional offer. Int J Prod Res 53:141–165. https://doi.org/10.1080/00207543.2014.942007
Das SK, Roy SK, Weber GW (2019) Heuristic approaches for solid transportation-p-facility location problem. Cent Eur J Oper Res 28(3):939–961. https://doi.org/10.1007/s10100-019-00610-7
De Giovanni P, Zaccour G (2019) A selective survey of game-theoretic models of closed-loop supply chains. 4OR 17(1):1–44. https://doi.org/10.1007/s10288-019-00399-w
Deakin E (2001) Sustainable development and sustainable transportation: strategies for economic prosperity, environmental quality, and equity. Institute of Urban and Regional Development, University of California at Berkeley, Berkeley, California. https://escholarship.org/content/qt8mf1z8mh/qt8mf1z8mh.pdf
Dehghan E, Nikabadi MS, Amiri M, Jabbarzadeh A (2018) Hybrid robust, stochastic and possibilistic programming for closed-loop supply chain network design. Comput Ind Eng 123:220–231. https://doi.org/10.1016/j.cie.2018.06.030
Demirel N, Özceylan E, Paksoy T, Gökçen H (2014) A genetic algorithm approach for optimising a closed-loop supply chain network with crisp and fuzzy objectives. Int J Prod Res 52:3637–3664. https://doi.org/10.1080/00207543.2013.879616
Desport P, Lardeux F, Lesaint D, Gilfedder CGC, Liret A, Owusu G (2017) A combinatorial optimisation approach for closed-loop supply chain inventory planning with deterministic demand. Eur J Ind Eng 11:303–327. https://doi.org/10.1504/EJIE.2017.084878
Devika K, Jafarian A, Nourbakhsh V (2014) Designing a sustainable closed-loop supply chain network based on triple bottom line approach: a comparison of metaheuristics hybridization techniques. Eur J Oper Res 235:594–615. https://doi.org/10.1016/j.ejor.2013.12.032
Dong J, Jiang L, Lu W, Guo Q (2019) Closed-loop supply chain models with product remanufacturing under random demand. Optimization. https://doi.org/10.1080/02331934.2019.1696341
Dubey R, Gunasekaran A, Childe SJ (2015) The design of a responsive sustainable supply chain network under uncertainty. Int J Adv Manuf Technol 80:427–445. https://doi.org/10.1007/s00170-015-6967-8
Dutta P, Das D, Schultmann F, Fröhling M (2016) Design and planning of a closed-loop supply chain with three way recovery and buy-back offer. J Clean Prod 135:604–619. https://doi.org/10.1016/j.jclepro.2016.06.108
Easwaran G, Üster H (2009) Tabu search and benders decomposition approaches for a capacitated closed-loop supply chain network design problem. Transp Sci 43:301–320. https://doi.org/10.1287/trsc.1090.0267
Ebrahimi SB (2018) A stochastic multi-objective location-allocation-routing problem for tire supply chain considering sustainability aspects and quantity discounts. J Clean Prod 198:704–720. https://doi.org/10.1016/j.jclepro.2018.07.059
Elkington J (2004) Enter the triple bottom line. In: Henriques A, Richardson J (eds) The triplle bottom line: does it all add up? Routledge
Eskandarpour M, Zegordi SH, Nikbakhsh E (2013) A parallel variable neighborhood search for the multi-objective sustainable post-sales network design problem. Int J Prod Econ 145:117–131. https://doi.org/10.1016/j.ijpe.2012.10.013
Eslamipoor R, Fakhrzad MB, Mehrjerdi YZ (2015) A new robust optimization model under uncertainty for new and remanufactured products. Int J Manag Sci Eng Manag 10:137–143. https://doi.org/10.1080/17509653.2014.930721
Fahimnia B, Sarkis J, Dehghanian F, Banihashemi N, Rahman S (2013) The impact of carbon pricing on a closed-loop supply chain: an Australian case study. J Clean Prod 59:210–225. https://doi.org/10.1016/j.jclepro.2013.06.056
Fakhrzad MB, Talebzadeh P, Goodarzian F (2018) Mathematical formulation and solving of green closed-loop supply chain planning problem with production, distribution and transportation reliability. Int J Eng Trans C Asp 31:2059–2067
Fang C, Liu X, Pei J, Fan W, Pardalos PM (2016) Optimal production planning in a hybrid manufacturing and recovering system based on the internet of things with closed loop supply chains. Oper Res 16:543–577. https://doi.org/10.1007/s12351-015-0213-x
Farrokh M, Azar A, Jandaghi G, Ahmadi E (2018) A novel robust fuzzy stochastic programming for closed loop supply chain network design under hybrid uncertainty. Fuzzy Sets Syst 341:69–91. https://doi.org/10.1016/j.fss.2017.03.019
Fathollahi-Fard AM, Hajiaghaei-Keshteli M (2018) A stochastic multi-objective model for a closed-loop supply chain with environmental considerations. Appl Soft Comput 69:232–249. https://doi.org/10.1016/j.asoc.2018.04.055
Fathollahi-Fard AM, Hajiaghaei-Keshteli M, Mirjalili S (2018a) Multi-objective stochastic closed-loop supply chain network design with social considerations. Appl Soft Comput 71:505–525. https://doi.org/10.1016/j.asoc.2018.07.025
Fathollahi-Fard AM, Hajiaghaei-Keshteli M, Mirjalili S (2018b) Hybrid optimizers to solve a tri-level programming model for a tire closed-loop supply chain network design problem. Appl Soft Comput 70:701–722. https://doi.org/10.1016/j.asoc.2018.06.021
Fazli-Khalaf M, Hamidieh A (2017) A robust reliable forward-reverse supply chain network design model under parameter and disruption uncertainties. Int J Eng Trans B Appl 30:1160–1169. https://doi.org/10.5829/ije.2017.30.08b.07
Fazli-Khalaf M, Khalilpourazari S, Mohammadi M (2019) Mixed robust possibilistic flexible chance constraint optimization model for emergency blood supply chain network design. Ann Oper Res 283(1–2):1079–1109. https://doi.org/10.1007/s10479-017-2729-3
Fazli-Khalaf M, Mirzazadeh A, Pishvaee MS (2017) A robust fuzzy stochastic programming model for the design of a reliable green closed-loop supply chain network. Hum Ecol Risk Assess An Int J 23:2119–2149. https://doi.org/10.1080/10807039.2017.1367644
Feng Z, Wang Z (2012) The optimization of a multi-commodity flow closed-loop supply chain supernetwork with stochastic choice. ICIC Express Lett Part B Appl 3:557–563
Ferguson ME, Fleischmann M, Souza GC (2011) A profit-maximizing approach to disposition decisions for product returns. Decis Sci 42:773–798. https://doi.org/10.1111/j.1540-5915.2011.00330.x
Forouzanfar F, Tavakkoli-Moghaddam R, Bashiri M, Baboli A (2016) A new bi-objective model for a closed-loop supply chain problem with inventory and transportation times. Sci Iran Trans E Ind Eng 23:1441–1458. https://doi.org/10.24200/sci.2016.3909
Forouzanfar F, Tavakkoli-Moghaddam R, Bashiri M, Baboli A, Molana SMH (2018) New mathematical modeling for a location–routing–inventory problem in a multi-period closed-loop supply chain in a car industry. J Ind Eng Int 14:537–553. https://doi.org/10.1007/s40092-017-0243-5
Gan SS, Pujawan IN, Suparno WB (2015) Pricing decision model for new and remanufactured short-life cycle products with time-dependent demand. Oper Res Perspect 2:1–12. https://doi.org/10.1016/j.orp.2014.11.001
Gao J, Han H, Hou L, Wang H (2016) Pricing and effort decisions in a closed-loop supply chain under different channel power structures. J Clean Prod 112:2043–2057. https://doi.org/10.1016/j.jclepro.2015.01.066
Garai A, Roy TK (2020) Multi-objective optimization of cost-effective and customer-centric closed-loop supply chain management model in T-environment. Soft Comp 24(1):155–178. https://doi.org/10.1007/s00500-019-04289-5
Garg K, Kannan D, Diabat A, Jha PC (2015) A multi-criteria optimization approach to manage environmental issues in closed loop supply chain network design. J Clean Prod 100:297–314. https://doi.org/10.1016/j.jclepro.2015.02.075
Gaur J, Amini M, Rao AK (2017) Closed-loop supply chain configuration for new and reconditioned products: An integrated optimization model. Omega 66:212–223. https://doi.org/10.1016/j.omega.2015.11.008
Georgiadis P, Athanasiou E (2013) Flexible long-term capacity planning in closed-loop supply chains with remanufacturing. Eur J Oper Res 225:44–58. https://doi.org/10.1016/j.ejor.2012.09.021
Ghafarimoghadam A, Karimi A, Mousazadeh M, Pishvaee MS (2016) A robust optimisation model for remanufacturing network design problem with one-way substitution. Int J Serv Oper Manag 24:484–503. https://doi.org/10.1504/IJSOM.2016.077785
Ghobadi A, Darestani SA, Shahroudi K (2015) Impact of closed-loop supply chains on reducing carbon emission and gaining competitive advantage: NSGA-II and MOPSO solutions. Indian J Sci Technol 8:12. https://doi.org/10.17485/ijst/2015/v8i35/81278
Gholipoor A, Paydar MM, Safaei AS (2019) A faucet closed-loop supply chain network design considering used faucet exchange plan. J Clean Prod 235:503–518. https://doi.org/10.1016/J.JCLEPRO.2019.06.346
Gholizadeh H, Tajdin A, Javadian N (2020) A closed-loop supply chain robust optimization for disposable appliances. Neural Comput Appl 32(8):3967–3985. https://doi.org/10.1007/s00521-018-3847-9
Ghomi-Avili M, Naeini SGJ, Tavakkoli-Moghaddam R, Jabbarzadeh A (2018) A fuzzy pricing model for a green competitive closed-loop supply chain network design in the presence of disruptions. J Clean Prod 188:425–442. https://doi.org/10.1016/j.jclepro.2018.03.273
Ghomi-Avili M, Naini SGJ, Tavakkoli-Moghaddam R, Jabbarzadeh A (2017) A network design model for a resilient closed-loop supply chain with lateral transshipment. Int J Eng Trans C Asp 30:374–383. https://doi.org/10.5829/idosi.ije.2017.30.03c.07
Ghorabaee MK, Amiri M, Olfat L, Firouzabadi SMAK (2017) Designing a multi-product multi-period supply chain network with reverse logistics and multiple objectives under uncertainty. Technol Econ Dev Econ 23:520–548. https://doi.org/10.3846/20294913.2017.1312630
Ghosh A, Ryan SM, Wang L, Weerasinghe A (2010) Heavy traffic analysis of a simple closed-loop supply chain. Stoch Model 26:549–593. https://doi.org/10.1080/15326349.2010.519665
Giri BC, Sharma S (2015) Optimizing a closed-loop supply chain with manufacturing defects and quality dependent return rate. J Manuf Syst 35:92–111. https://doi.org/10.1016/j.jmsy.2014.11.014
Glock CH (2017) Decision support models for managing returnable transport items in supply chains: a systematic literature review. Int J Prod Econ 183:561–569. https://doi.org/10.1016/j.ijpe.2016.02.015
Godichaud M, Amodeo L (2015) Efficient multi-objective optimization of supply chain with returned products. J Manuf Syst 37:683–691. https://doi.org/10.1016/j.jmsy.2014.12.004
Gold S, Seuring S, Beske P (2010) Sustainable supply chain management and inter-organizational resources: a literature review. Corp Soc Responsib Environ Manag 17:230–245. https://doi.org/10.1002/csr.207
Goli A, Davoodi SMR (2018) Coordination policy for production and delivery scheduling in the closed loop supply chain. Prod Eng 12:621–631. https://doi.org/10.1007/s11740-018-0841-0
Goli A, Zare HK, Tavakkoli-Moghaddam R, Sadegheih A (2020) Multiobjective fuzzy mathematical model for a financially constrained closed-loop supply chain with labor employment. Comput Intell 36(1):4–34. https://doi.org/10.1111/coin.12228
Golroudbary SR, Zahraee SM (2015) System dynamics model for optimizing the recycling and collection of waste material in a closed-loop supply chain. Simul Model Pract Theory 53:88–102. https://doi.org/10.1016/j.simpat.2015.02.001
Gong G, Deng Q, Gong X, Zhang L, Wang H, Xie H (2018) A bee evolutionary algorithm for multiobjective vehicle routing problem with simultaneous pickup and delivery. Math Probl Eng 2018:21. https://doi.org/10.1155/2018/2571380
Gong Y, Huang D (2012) Optimization of closed-loop supply Chain under uncertainty using hybrid algorithm. Adv Sci Lett 7:271–276
Govindan K, Jha PC, Garg K (2016) Product recovery optimization in closed-loop supply chain to improve sustainability in manufacturing. Int J Prod Res 54:1463–1486. https://doi.org/10.1080/00207543.2015.1083625
Govindan K, Soleimani H (2017) A review of reverse logistics and closed-loop supply chains: a Journal of Cleaner Production focus. J Clean Prod 142:371–384. https://doi.org/10.1016/j.jclepro.2016.03.126
Govindan K, Soleimani H, Kannan D (2015) Reverse logistics and closed-loop supply chain: a comprehensive review to explore the future. Eur J Oper Res 240:603–626. https://doi.org/10.1016/j.ejor.2014.07.012
Griffis SE, Bell JE, Closs DJ (2012) Metaheuristics in logistics and supply chain management. J Bus Logist 33:90–106. https://doi.org/10.1111/j.0000-0000.2012.01042.x
Gu Q, Gao T (2012) Management of two competitive closed-loop supply chains. Int J Sustain Eng 5:325–337. https://doi.org/10.1080/19397038.2012.718808
Guerrero WJ, Sotelo-Cortés LA, Romero-Motta E (2018) Simulation-optimization techniques for closed-loop supply chain design with multiple objectives. DYNA 85:202–210. https://doi.org/10.15446/dyna.v85n206.70596
Guide VDR, Van Wassenhove LN (2009) The evolution of closed-loop supply chain research. Oper Res 57:10–18. https://doi.org/10.1287/opre.1080.0628
Habibi MKK, Battaïa O, Cung VD, Dolgui A (2017) An efficient two-phase iterative heuristic for collection-disassembly problem. Comput Ind Eng 110:505–514. https://doi.org/10.1016/j.cie.2017.06.031
Haddadsisakht A, Ryan SM (2018) Closed-loop supply chain network design with multiple transportation modes under stochastic demand and uncertain carbon tax. Int J Prod Econ 195:118–131. https://doi.org/10.1016/j.ijpe.2017.09.009
Hajej Z, Rezg N, Bouslikhane S (2019) A joint production and maintenance optimization of closed-loop production system under carbon emission with a switching subcontractor consideration. Appl Sci 9(6):1105. https://doi.org/10.3390/app9061105
Hajiaghaei-keshteli M, Abdallah KS, Fathollahi-fard AM (2018) A collaborative stochastic closed-loop supply chain network design for tire industry. Int J Eng Trans A Basics 31:1715–1722. https://doi.org/10.5829/ije.2018.31.10a.14
Hajiaghaei-Keshteli M, Fathollahi Fard AM (2018) Sustainable closed-loop supply chain network design with discount supposition. Neural Comput Appl (Springer, London). https://doi.org/10.1007/s00521-018-3369-5
Hajipour V, Tavana M, Di Caprio D, Akhgar M, Jabbari Y (2019) An optimization model for traceable closed-loop supply chain networks. Appl Math Model 71:673–699. https://doi.org/10.1016/j.apm.2019.03.007
Hamdouch Y, Qiang QP, Ghoudi K (2017) A closed-loop supply chain equilibrium model with random and price-sensitive demand and return. Netw Spat Econ 17:459–503. https://doi.org/10.1007/s11067-016-9333-y
Hamidieh A, Arshadikhamseh A, Fazli-khalaf M (2018) A robust reliable closed loop supply chain network design under uncertainty: a case study in equipment training centers. Int J Eng Trans A Basics 31:648–658. https://doi.org/10.5829/ije.2018.31.04a.17
Hamidieh A, Fazli-Khalaf M (2017) A possibilistic reliable and responsive closed loop supply chain network design model under uncertainty. J Adv Manuf Syst 16:317–338. https://doi.org/10.1142/S0219686717500196
Hamidieh A, Naderi B, Mohammadi M, Fazli-Khalaf M (2017) A robust possibilistic programming model for a responsive closed loop supply chain network design. Cogent Math 4:22. https://doi.org/10.1080/23311835.2017.1329886
Hasani A, Eskandarpour M, Fattahi M (2018) A simulation-based optimisation approach for multi-objective inventory control of perishable products in closed-loop supply chains under uncertainty. Int J Adv Oper Manag 10:324–344. https://doi.org/10.1504/IJAOM.2018.097268
Hasani A, Zegordi SH, Nikbakhsh E (2012) Robust closed-loop supply chain network design for perishable goods in agile manufacturing under uncertainty. Int J Prod Res 50:4649–4669. https://doi.org/10.1080/00207543.2011.625051
Hashemi V, Chen M, Fang L (2016) Modeling and analysis of aerospace remanufacturing systems with scenario analysis. Int J Adv Manuf Technol 87:2135–2151. https://doi.org/10.1007/s00170-016-8566-8
Hassanpour A, Bagherinejad J, Bashiri M (2019) A robust leader-follower approach for closed loop supply chain network design considering returns quality levels. Comput Ind Eng 136:293–304. https://doi.org/10.1016/j.cie.2019.07.031
He-Lambert L, Shylo O, English BC, Eash NS, Zahn JA, Lambert DM (2019) Supply chain and logistic optimization of industrial Spent Microbial Biomass distribution as a soil amendment for field crop production. Resour Conserv Recy 146:218–231. https://doi.org/10.1016/j.resconrec.2019.03.028
He J, Zhang L, Fu X, Tsai F (2018) Fair but Risky? Recycle pricing strategies in closed-loop supply chains. Int J Environ Res Public Health 15:2870. https://doi.org/10.3390/ijerph15122870
He Y (2015) Acquisition pricing and remanufacturing decisions in a closed-loop supply chain. Int J Prod Econ 163:48–60. https://doi.org/10.1016/j.ijpe.2015.02.002
Hosseini MR, Rameezdeen R, Chileshe N, Lehmann S (2015) Reverse logistics in the construction industry. Waste Manag Res 33:499–514. https://doi.org/10.1177/0734242X15584842
Huaibo C (2016) closed loop supply chain optimization model of green fast consumer goods based on multi objective game theory. J Comput Theor Nanosci 13:7939–7946. https://doi.org/10.1166/jctn.2016.5795
Huang B, Saaty TL, Li Y (2019) Collaborative R&D and pricing policy of supply chain under the selection behavior of heterogeneous customer. Math Probl Eng 2019:2573142. https://doi.org/10.1155/2019/2573142
Huang Y, Wang Z (2017) Dual-recycling channel decision in a closed-loop supply chain with cost disruptions. Sustainability 9:2004. https://doi.org/10.3390/su9112004
Iassinovskaia G, Limbourg S, Riane F (2017) The inventory-routing problem of returnable transport items with time windows and simultaneous pickup and delivery in closed-loop supply chains. Int J Prod Econ 183:570–582. https://doi.org/10.1016/j.ijpe.2016.06.024
Igarashi K, Yamada T, Inoue M (2014) 2-Stage optimal design and analysis for disassembly system with environmental and economic parts selection using the recyclability evaluation method. Ind Eng Manag Syst 13:52–66. https://doi.org/10.7232/iems.2014.13.1.052
Ilgin MA, Gupta SM (2010) Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art. J Environ Manage 91:563–591. https://doi.org/10.1016/j.jenvman.2009.09.037
Islam MT, Huda N (2018) Reverse logistics and closed-loop supply chain of Waste electrical and electronic equipment (WEEE)/E-waste: a comprehensive literature review. Resour Conserv Recycl 137:48–75. https://doi.org/10.1016/j.resconrec.2018.05.026
Jabbarzadeh A, Haughton M, Khosrojerdi A (2018) Closed-loop supply chain network design under disruption risks: a robust approach with real world application. Comput Ind Eng 116:178–191. https://doi.org/10.1016/j.cie.2017.12.025
Jeihoonian M, Zanjani MK, Gendreau M (2017) Closed-loop supply chain network design under uncertain quality status: case of durable products. Int J Prod Econ 183:470–486. https://doi.org/10.1016/j.ijpe.2016.07.023
Jeihoonian M, Zanjani MK, Gendreau M (2016) Accelerating Benders decomposition for closed-loop supply chain network design: case of used durable products with different quality levels. Eur J Oper Res 251:830–845. https://doi.org/10.1016/j.ejor.2015.12.052
Jemai J, Sarkar B (2019) Optimum design of a transportation scheme for healthcare supply chain management: the effect of energy consumption. Energies 12(14):2789. https://doi.org/10.3390/en12142789
Jena SK, Sarmah SP (2016) Future aspect of acquisition management in closed-loop supply chain. Int J Sustain Eng 9:266–276. https://doi.org/10.1080/19397038.2016.1181120
Jena SK, Sarmah SP, Sarin SC (2017) Joint-advertising for collection of returned products in a closed-loop supply chain under uncertain environment. Comput Ind Eng 113:305–322. https://doi.org/10.1016/j.cie.2017.09.024
Jiang HW (2012) Research on production optimization model of the closed-loop supply chain with remanufacturing based on product differentiation. Appl Mech Mater 241–244:1503–1506. https://doi.org/10.4028/www.scientific.net/AMM.241-244.1503
Jiang M, Lin X, Ren H (2016) Research on synergetic pricing strategy of cloud-closed loop supply chains. Adv Model Anal A 59:30–46
Jiao Z, Ran L, Zhang Y, Li Z, Zhang W (2018) Data-driven approaches to integrated closed-loop sustainable supply chain design under multi-uncertainties. J Clean Prod 185:105–127. https://doi.org/10.1016/j.jclepro.2018.02.255
Jindal A, Sangwan KS (2014) Closed loop supply chain network design and optimisation using fuzzy mixed integer linear programming model. Int J Prod Res 52:4156–4173. https://doi.org/10.1080/00207543.2013.861948
Jing Y, Li W (2018) Integrated recycling-production-distribution planning for decentralized closed-loop supply chain. J Ind Manag Optim 14:511–539. https://doi.org/10.3934/jimo.2017058
Jinmei W, Shumei O, Shuling L (2017) Pricing strategy for end-of-life electrical and electronic products with remanufacturing under joint recovery mode. J Eng Sci Technol Rev. 10:76–83. https://doi.org/10.25103/jestr.105.09
Johari M, Hosseini-Motlagh S (2019) Coordination of social welfare, collecting, recycling and pricing decisions in a competitive sustainable closed-loop supply chain: a case for lead-acid battery. Ann Oper Res 2019:1–36. https://doi.org/10.1007/s10479-019-03292-1
Kadambala DK, Subramanian N, Tiwari MK, Abdulrahman M, Liu C (2017) Closed loop supply chain networks: Designs for energy and time value efficiency. Int J Prod Econ 183:382–393. https://doi.org/10.1016/j.ijpe.2016.02.004
Kalaitzidou MA, Longinidis P, Georgiadis MC (2015) Optimal design of closed-loop supply chain networks with multifunctional nodes. Comput Chem Eng 80:73–91. https://doi.org/10.1016/j.compchemeng.2015.05.009
Kang K, Wang X, Ma Y (2017) A collection-distribution center location and allocation optimization model in closed-loop supply chain for chinese beer industry. Math Probl Eng 2017:15. https://doi.org/10.1155/2017/7863202
Kannan G, Haq AN, Devika M (2009) Analysis of closed loop supply chain using genetic algorithm and particle swarm optimisation. Int J Prod Res 47:1175–1200. https://doi.org/10.1080/00207540701543585
Kannan G, Sasikumar P, Devika K (2010) A genetic algorithm approach for solving a closed loop supply chain model: A case of battery recycling. Appl Math Model 34:655–670. https://doi.org/10.1016/j.apm.2009.06.021
Kapur PK, Sachdeva N, Singh O (2017) Optimal profit for manufacturers in product remanufacturing diffusion dynamics. J Ind Prod Eng 34:568–579. https://doi.org/10.1080/21681015.2017.1295405
Karakama T, Kainuma Y (2013) Design of a global closed-loop supply chain model. J Japan Ind Manag Assoc 64:366–375
Kenné JP, Dejax P, Gharbi A (2012) Production planning of a hybrid manufacturing-remanufacturing system under uncertainty within a closed-loop supply chain. Int J Prod Econ 135:81–93. https://doi.org/10.1016/j.ijpe.2010.10.026
Keyvanshokooh E, Ryan SM, Kabir E (2016) Hybrid robust and stochastic optimization for closed-loop supply chain network design using accelerated Benders decomposition. Eur J Oper Res 249:76–92. https://doi.org/10.1016/j.ejor.2015.08.028
Khatami M, Mahootchi M, Farahani RZ (2015) Benders’ decomposition for concurrent redesign of forward and closed-loop supply chain network with demand and return uncertainties. Transp Res Part E Logist Transp Rev 79:1–21. https://doi.org/10.1016/j.tre.2015.03.003
Kim J, Chung BD, Kang Y, Jeong B (2018) Robust optimization model for closed-loop supply chain planning under reverse logistics flow and demand uncertainty. J Clean Prod 196:1314–1328. https://doi.org/10.1016/j.jclepro.2018.06.157
Kim T, Goyal SK, Kim CH (2013) Lot-streaming policy for forward–reverse logistics with recovery capacity investment. Int J Adv Manuf Technol 68:509–522. https://doi.org/10.1007/s00170-013-4748-9
Kinoshita Y, Yamada T, Gupta SM, Ishigaki A, Inoue M (2018) Analysis of cost effectiveness by material type for CO2 saving and recycling rates in disassembly parts selection using goal programming. J Adv Mech Des Syst Manuf 12:18. https://doi.org/10.1299/jamdsm.2018jamdsm0080
Kisomi MS, Solimanpur M, Doniavi A (2016) An integrated supply chain configuration model and procurement management under uncertainty: a set-based robust optimization methodology. Appl Math Model 40:7928–7947. https://doi.org/10.1016/j.apm.2016.03.047
Kong L, Liu Z, Pan Y, Xie J, Yang G (2017) Pricing and service decision of dual-channel operations in an O2O closed-loop supply chain. Ind Manag Data Syst 117:1567–1588. https://doi.org/10.1108/IMDS-12-2016-0544
Krikke H (2011) Impact of closed-loop network configurations on carbon footprints: a case study in copiers. Resour Conserv Recycl 55:1196–1205. https://doi.org/10.1016/j.resconrec.2011.07.001
Krikke H, le Blanc I, van Krieken M, Fleuren H (2008) Low-frequency collection of materials disassembled from end-of-life vehicles. On the value of on-line monitoring in optimizing route planning. Int J Prod Econ 111:209–228. https://doi.org/10.1016/j.ijpe.2006.10.015
Kristianto Y, Helo P (2015) Reprint of “Product architecture modularity implications for operations economy of green supply chains.” Transp Res Part E Logist Transp Rev 74:63–80. https://doi.org/10.1016/j.tre.2014.12.008
Kristianto Y, Helo P (2014) Product architecture modularity implications for operations economy of green supply chains. Transp Res Part E Logist Transp Rev 70:128–145. https://doi.org/10.1016/j.tre.2014.06.019
Kumar DT, Soleimani H, Kannan G (2014) Forecasting return products in an integrated forward/reverse supply chain utilizing an ANFIS. Int J Appl Math Comput Sci 24:669–682. https://doi.org/10.2478/amcs-2014-0049
Kumar VV, Chan FTS (2011) A superiority search and optimisation algorithm to solve RFID and an environmental factor embedded closed loop logistics model. Int J Prod Res 49:4807–4831. https://doi.org/10.1080/00207543.2010.503201
Kundu S, Chakrabarti T (2018) Impact of carbon emission policies on manufacturing, remanufacturing and collection of used item decisions with price dependent return rate. OPSEARCH 55:532–555. https://doi.org/10.1007/s12597-018-0336-y
Kwak M (2018) Optimal line design of new and remanufactured products: a model for maximum profit and market share with environmental consideration. Sustainability 10:4283. https://doi.org/10.3390/su10114283
Lee C, Realff M, Ammons J (2011) Integration of channel decisions in a decentralized reverse production system with retailer collection under deterministic non-stationary demands. Adv En Inf 25:88–102. https://doi.org/10.1016/j.aei.2010.04.001
Lee CKM, Chan TM (2009) Development of RFID-based Reverse Logistics System. Expert Syst Appl 36:9299–9307. https://doi.org/10.1016/j.eswa.2008.12.002
Lee JE, Lee KD (2012) Integrated forward and reverse logistics model: a case study in distilling and sale company in Korea. Int J Innov Comput Inf Control 8:4483–4495
Lee JE, Lee KD (2013) Modeling and optimization of closed-loop supply chain considering order or next arrival of goods. Int J Innov Comput Inf Control 9:3639–3654
Lehr CB, Thun JH, Milling PM (2013) From waste to value—a system dynamics model for strategic decision-making in closed-loop supply chains. Int J Prod Res 51:4105–4116. https://doi.org/10.1080/00207543.2013.774488
Li C (2013) An integrated approach to evaluating the production system in closed-loop supply chains. Int J Prod Res 51:4045–4069. https://doi.org/10.1080/00207543.2013.774467
Li H, Wang C, Xu L, Ou W (2017) Pricing, carbon emission reduction, collection decision, and coordination in a low-carbon closed-loop supply chain. J Renew Sustain Energy 9:065907. https://doi.org/10.1063/1.4991668
Li L, Dababneh F, Zhao J (2018a) Cost-effective supply chain for electric vehicle battery remanufacturing. Appl Energy 226:277–286. https://doi.org/10.1016/j.apenergy.2018.05.115
Li X, Li Y, Govindan K (2014) An incentive model for closed-loop supply chain under the EPR law. J Oper Res Soc 65:88–96. https://doi.org/10.1057/jors.2012.179
Li Y, Guo H, Zhang Y (2018b) An integrated location-inventory problem in a closed-loop supply chain with third-party logistics. Int J Prod Res 56:3462–3481. https://doi.org/10.1080/00207543.2017.1338781
Li Z, Zhang J, Meng Q, Zheng W, Du J (2019) Influence of government subsidy on remanufacturing decision under different market models. Math Probl Eng 2019:9460315. https://doi.org/10.1155/2019/9460315
Liao H, Deng Q, Wang Y (2017) Optimal acquisition and production policy for end-of-life engineering machinery recovering in a joint manufacturing/remanufacturing system under uncertainties in procurement and demand. Sustainability 9:338. https://doi.org/10.3390/su9030338
Lieckens K, Vandaele N (2012) Multi-level reverse logistics network design under uncertainty. Int J Prod Res 50:23–40. https://doi.org/10.1080/00207543.2011.571442
Lieder M, Asif FMA, Rashid A, Mihelič A, Kotnik S (2017) Towards circular economy implementation in manufacturing systems using a multi-method simulation approach to link design and business strategy. Int J Adv Manuf Technol 93:1953–1970. https://doi.org/10.1007/s00170-017-0610-9
Litvinchev I, Rios YA, Özdemir D, Hernández-Landa LG (2014) Multiperiod and stochastic formulations for a closed loop supply chain with incentives. J Comput Syst Sci Int 53:201–211. https://doi.org/10.1134/S1064230714020129
Liu M, Liu R, Zhu Z, Chu C, Man X (2018) A bi-objective green closed loop supply chain design problem with uncertain demand. Sustainability 10:967. https://doi.org/10.3390/su10040967
Ma C, Huang D (2020) Research on the impact of green innovation alliance mode on decision-making of two-cycle closed-loop supply chain. J Comb Optim 39(2):519–546. https://doi.org/10.1007/s10878-019-00496-w
Ma L, Liu Y, Liu Y (2020) Distributionally robust design for bicycle-sharing closed-loop supply chain network under risk-averse criterion. J Clean Prod 246:118967. https://doi.org/10.1016/j.jclepro.2019.118967
Ma R, Yao L, Jin M, Ren P, Lv Z (2016) Robust environmental closed-loop supply chain design under uncertainty. Chaos, Solitons Fractals 89:195–202. https://doi.org/10.1016/j.chaos.2015.10.028
Machi LA, McEvoy BT (2016) The Literature Review: Six Steps to Success, 3rd edn. Press, Corwin, Thousand Oaks
Mahmoudzadeh M, Sadjadi SJ, Mansour S (2013) Robust optimal dynamic production/pricing policies in a closed-loop system. Appl Math Model 37:8141–8161. https://doi.org/10.1016/j.apm.2013.03.008
Mayring P (2014) Qualitative content analysis: theoretical foundation, basic procedures and software solution. Klagenfurt, Austria. 143p. This text is under a CC BY-NC-ND license. PID: https://nbn-resolving.org/urn:nbn:de:0168-ssoar-395173
Meredith J (1993) Theory building through conceptual methods. Int J Oper Prod Manag 13:3–11. https://doi.org/10.1108/01443579310028120
Metta H, Badurdeen F (2013) Integrating sustainable product and supply chain design: modeling issues and challenges. IEEE Trans Eng Manag 60:438–446. https://doi.org/10.1109/TEM.2012.2206392
Miao S, Wang T, Chen D (2017) System dynamics research of remanufacturing closed-loop supply chain dominated by the third party. Waste Manag Res 35:379–386. https://doi.org/10.1177/0734242X16684384
Minner S, Kiesmüller GP (2012) Dynamic product acquisition in closed loop supply chains. Int J Prod Res 50:2836–2851. https://doi.org/10.1080/00207543.2010.539280
Mitra S (2012) Inventory management in a two-echelon closed-loop supply chain with correlated demands and returns. Comput Ind Eng 62:870–879. https://doi.org/10.1016/j.cie.2011.12.008
Moghaddam KS (2015) Supplier selection and order allocation in closed-loop supply chain systems using hybrid Monte Carlo simulation and goal programming. Int J Prod Res 53:6320–6338. https://doi.org/10.1080/00207543.2015.1054452
Mohajeri A, Fallah M (2016) A carbon footprint-based closed-loop supply chain model under uncertainty with risk analysis: a case study. Transp Res Part D Transp Environ 48:425–450. https://doi.org/10.1016/j.trd.2015.09.001
Mohammed A (2019) Towards a sustainable assessment of suppliers: an integrated fuzzy TOPSIS-possibilistic multi-objective approach. Ann Oper Res 293:639–668. https://doi.org/10.1007/s10479-019-03167-5
Mohammed F, Hassan A, Selim SZ (2018) Robust optimization for closed-loop supply chain network design considering carbon policies under uncertainty. Int J Ind Eng 25:526–558
Mohammed F, Selim SZ, Hassan A, Syed MN (2017) Multi-period planning of closed-loop supply chain with carbon policies under uncertainty. Transp Res Part D Transp Environ 51:146–172. https://doi.org/10.1016/j.trd.2016.10.033
Montagna A, Cafaro D (2019) Supply chain networks servicing upstream operations in oil and gas fields after the shale revolution. Aiche J 65(12):e16762. https://doi.org/10.1002/aic.16762
Mota B, Gomes MI, Carvalho A, Barbosa-Povoa AP (2018) Sustainable supply chains: an integrated modeling approach under uncertainty. Omega 77:32–57. https://doi.org/10.1016/j.omega.2017.05.006
Mota B, Gomes MI, Carvalho A, Barbosa-Povoa AP (2015) Towards supply chain sustainability: economic, environmental and social design and planning. J Clean Prod 105:14–27. https://doi.org/10.1016/j.jclepro.2014.07.052
Nagurney A, Besik D, Nagurney SL (2019) Global supply chain networks and tariff rate quotas: equilibrium analysis with application to agricultural products. J Global Optim 75(2):439–460. https://doi.org/10.1007/s10898-019-00794-x
Nahr JG, Kian R, Rezazadeh H (2018) A modified priority-based encoding for design of a closed-loop supply chain network using a discrete league championship algorithm. Math Probl Eng 2018:16. https://doi.org/10.1155/2018/8163927
Nenes G, Nikolaidis Y (2012) A multi-period model for managing used product returns. Int J Prod Res 50:1360–1376. https://doi.org/10.1080/00207543.2011.609650
Nikolopoulou A, Ierapetritou MG (2012) Optimal design of sustainable chemical processes and supply chains: a review. Comput Chem Eng 44:94–103. https://doi.org/10.1016/j.compchemeng.2012.05.006
Niranjan T, Parthiban P, Sundaram K, Jeyaganesan PN (2019) Designing a omnichannel closed loop green supply chain network adapting preferences of rational customers. Sādhanā 44(3):1–10. https://doi.org/10.1007/s12046-018-1038-0
Nobari A, Kheirkhah A (2018) Integrated and dynamic design of sustainable closed-loop supply chain network considering pricing. Sci Iran Trans E Ind Eng 25:410–430. https://doi.org/10.24200/sci.2017.4411
Omrani H, Hushyar I, Zolmabadi SM, Asl AJ (2018) A multi-objective programming model for selection third-party logistics companies and suppliers in a closed-loop supply chain. Int J Ind Syst Eng 30:486–511
Ou X, Arinez J, Chang Q, Xiao G (2017) Cost analysis and fuzzy control for collapsible container usage based on closed-loop supply chain model. J Manuf Sci Eng 139:11. https://doi.org/10.1115/1.4036522
Özceylan E (2016) Simultaneous optimization of closed- and open-loop supply chain networks with common components. J Manuf Syst 41:143–156. https://doi.org/10.1016/j.jmsy.2016.08.008
Özceylan E, Demirel N, Çetinkaya C, Demirel E (2017) A closed-loop supply chain network design for automotive industry in Turkey. Comput Ind Eng 113:727–745. https://doi.org/10.1016/j.cie.2016.12.022
Özceylan E, Paksoy T (2013a) A mixed integer programming model for a closed-loop supply-chain network. Int J Prod Res 51:718–734. https://doi.org/10.1080/00207543.2012.661090
Özceylan E, Paksoy T (2013b) Fuzzy multi-objective linear programming approach for optimising a closed-loop supply chain network. Int J Prod Res 51:2443–2461. https://doi.org/10.1080/00207543.2012.740579
Özceylan E, Paksoy T, Bektaş T (2014) Modeling and optimizing the integrated problem of closed-loop supply chain network design and disassembly line balancing. Transp Res Part E Logist Transp Rev 61:142–164. https://doi.org/10.1016/j.tre.2013.11.001
Özkir V, Başligil H (2013) Multi-objective optimization of closed-loop supply chains in uncertain environment. J Clean Prod 41:114–125. https://doi.org/10.1016/j.jclepro.2012.10.013
Paksoy T, Pehlivan NY, Özceylan E (2012) Fuzzy multi-objective optimization of a green supply chain network with risk management that includes environmental hazards. Hum Ecol Risk Assess An Int J 18:1120–1151. https://doi.org/10.1080/10807039.2012.707940
Patne K, Shukla N, Kiridena S, Tiwari MK (2018) Solving closed-loop supply chain problems using game theoretic particle swarm optimisation. Int J Prod Res 56:5836–5853. https://doi.org/10.1080/00207543.2018.1478149
Paydar MM, Babaveisi V, Safaei AS (2017) An engine oil closed-loop supply chain design considering collection risk. Comput Chem Eng 104:38–55. https://doi.org/10.1016/j.compchemeng.2017.04.005
Pazhani S, Ravindran AR (2018) A bi-criteria model for closed loop supply chain network design. Int J Oper Res. 31(3):330–356. https://doi.org/10.1504/IJOR.2018.089735
Pedram A, Pedram P, Yusoff NB, Sorooshian S (2017) Development of closed-loop supply chain network in terms of corporate social responsibility. PLoS ONE 12:1–20. https://doi.org/10.1371/journal.pone.0174951
Pei HL, Li HL (2018) Modeling stochastic multi-period multi-product closed-loop supply chain network by joint service level constraints. J Uncertain Syst 12:68–80
Peng H, Shen N, Liao H, Xue H, Wang Q (2020) Uncertainty factors, methods, and solutions of closed-loop supply chain — A review for current situation and future prospects. J Clean Prod 254:120032. https://doi.org/10.1016/j.jclepro.2020.120032
Pinçe Ç, Ferguson M, Toktay B (2016) Extracting maximum value from consumer returns: allocating between remarketing and refurbishing for warranty claims. Manuf Serv Oper Manag 18:475–492. https://doi.org/10.1287/msom.2016.0584
Pishvaee MS, Farahani RZ, Dullaert W (2010) A memetic algorithm for bi-objective integrated forward/reverse logistics network design. Comput Oper Res 37:1100–1112. https://doi.org/10.1016/j.cor.2009.09.018
Pishvaee MS, Rabbani M, Torabi SA (2011) A robust optimization approach to closed-loop supply chain network design under uncertainty. Appl Math Model 35:637–649. https://doi.org/10.1016/j.apm.2010.07.013
Pishvaee MS, Torabi SA (2010) A possibilistic programming approach for closed-loop supply chain network design under uncertainty. Fuzzy Sets Syst 161:2668–2683. https://doi.org/10.1016/j.fss.2010.04.010
Ponce-Cueto E, Muelas MM (2015) Integrating forward and reverse logistics network for commercial goods management. An integer linear programming model proposal. Int J Prod Manag Eng 3:25–32. https://doi.org/10.4995/ijpme.2015.3314
Pourhejazy P, Kwon OK (2016) The new generation of operations research methods in supply chain optimization: a review. Sustainability 8:23. https://doi.org/10.3390/su8101033
Pourjavad E, Mayorga RV (2018) Optimization of a sustainable closed loop supply chain network design under uncertainty using multi-objective evolutionary algorithms. Adv Prod Eng Manag 13:216–228. https://doi.org/10.14743/apem2018.2.286
Prakash S, Kumar S, Soni G, Jain V, Rathore APS (2020) Closed-loop supply chain network design and modelling under risks and demand uncertainty: an integrated robust optimization approach. Ann Oper Res 290(1–2):837–864. https://doi.org/10.1007/s10479-018-2902-3
Prakash S, Soni G, Rathore APS (2017) Embedding risk in closed-loop supply chain network design: case of a hospital furniture manufacturer. J Model Manag 12:551–574. https://doi.org/10.1108/JM2-02-2016-0017
Qing Y (2019) Selection and optimization of cooperative advertising strategies in supply chain based on stackelberg game method. Cluster Comput 22:12059–12068. https://doi.org/10.1007/s10586-017-1554-4
Quariguasi FNJ, Walther G, Bloemhof J, van Nunen JAE, Spengler T (2010) From closed-loop to sustainable supply chains: the WEEE case. Int J Prod Res 48:4463–4481. https://doi.org/10.1080/00207540902906151
Quariguasi JFN, Walther G, Bloemhof J, van Nunen JAEE, Spengler T (2009) A methodology for assessing eco-efficiency in logistics networks. Eur J Oper Res 193:670–682. https://doi.org/10.1016/j.ejor.2007.06.056
Rad RS, Nahavandi N (2018) A novel multi-objective optimization model for integrated problem of green closed loop supply chain network design and quantity discount. J Clean Prod 196:1549–1565. https://doi.org/10.1016/j.jclepro.2018.06.034
Rad RS, Nahavandi N, Kashan AH, Zegordi SH (2018) An integrated closed-loop supply chain configuration model and supplier selection based on offered discount policies. Int J Eng Trans C Asp 31:440–449. https://doi.org/10.5829/ije.2018.31.03c.06
Rahimi M, Fazlollahtabar H (2018) Optimization of a closed loop green supply chain using particle swarm and genetic algorithms. Jordan J Mech Ind Eng 12:77–91
Rahmani-ahranjani A, Bozorgi-amiri A, Seifbarghy M, Najafi E (2017) Managing environmentally conscious in designing closed-loop supply chain for the paper industry. Int J Eng Trans A Basics 30:1038–1047. https://doi.org/10.5829/ije.2017.30.07a.13
Rajak S, Parthiban P, Dhanalakshmi R (2018) Selection of transportation channels in closed-loop supply chain using meta-heuristic algorithm. Int J Inf Syst Supply Chain Manag 11:64–86. https://doi.org/10.4018/IJISSCM.2018070104
Rajesh R (2020) Network design for resilience in supply chains using novel crazy elitist TLBO. Neural Comput Appl 32(11):7421–7437. https://doi.org/10.1007/s00521-019-04260-3
Ramezani M, Bashiri M, Tavakkoli-Moghaddam R (2013) A robust design for a closed-loop supply chain network under an uncertain environment. Int J Adv Manuf Technol 66:825–843. https://doi.org/10.1007/s00170-012-4369-8
Ramezani M, Kimiagari AM, Karimi B (2015) Interrelating physical and financial flows in a bi-objective closed-loop supply chain network problem with uncertainty. Sci Iran Trans E Ind Eng 22:1278–1293
Ramezani M, Kimiagari AM, Karimi B, Hejazi TH (2014) Closed-loop supply chain network design under a fuzzy environment. Knowl-Based Syst 59:108–120. https://doi.org/10.1016/j.knosys.2014.01.016
Ray A, Mondal S (2018) An optimisation approach for finding an optimal pricing in a hybrid manufacturing/remanufacturing system. Int J Ind Syst Eng 29:18. https://doi.org/10.1504/IJISE.2018.091430
Ray A, Mondal S (2017) Study of collaborative PRM business model for sustainability. Benchmarking An Int J 24:1891–1911. https://doi.org/10.1108/BIJ-04-2016-0048
Ren J, Chen C, Xu H, Zhao Q (2018) An optimization model for the operations of a pallet pool with both radio-frequency identification–tagged pallets and non-tagged pallets. Adv Mech Eng 10:1–13. https://doi.org/10.1177/1687814017748013
Rezaee MJ, Yousefi S, Hayati J (2017) A multi-objective model for closed-loop supply chain optimization and efficient supplier selection in a competitive environment considering quantity discount policy. J Ind Eng Int 13:199–213. https://doi.org/10.1007/s40092-016-0178-2
Rezaei S, Kheirkhah A (2018) A comprehensive approach in designing a sustainable closed-loop supply chain network using cross-docking operations. Comput Math Organ Theory 24:51–98. https://doi.org/10.1007/s10588-017-9247-3
Rezapour S, Farahani RZ, Fahimnia B, Govindan K, Mansouri Y (2015) Competitive closed-loop supply chain network design with price-dependent demands. J Clean Prod 93:251–272. https://doi.org/10.1016/j.jclepro.2014.12.095
Saedinia R, Vahdani B, Etebari F, Afshar Nadjaf B (2019) Robust gasoline closed loop supply chain design with redistricting, service sharing and intra-district service transfer. Transp Res E Log 123:121–141. https://doi.org/10.1016/j.tre.2019.01.015
Safaei AS, Roozbeh A, Paydar MM (2017) A robust optimization model for the design of a cardboard closed-loop supply chain. J Clean Prod 166:1154–1168. https://doi.org/10.1016/j.jclepro.2017.08.085
Saffar MM, Shakouri GH, Razmi J (2014) A new bi-objective mixed integer linear programming for designing a supply chain considering CO2 emission. Uncertain Supply Chain Manag 2:275–292. https://doi.org/10.5267/j.uscm.2014.6.001
Sahamie R, Stindt D, Nuss C (2013) Transdisciplinary research in sustainable operations—an application to closed-loop supply chains. Bus Strateg Environ 22:245–268. https://doi.org/10.1002/bse.1771
Sahebjamnia N, Fathollahi-Fard AM, Hajiaghaei-Keshteli M (2018) Sustainable tire closed-loop supply chain network design: hybrid metaheuristic algorithms for large-scale networks. J Clean Prod 196:273–296. https://doi.org/10.1016/j.jclepro.2018.05.245
Salema MIG, Barbosa-Povoa AP, Novais AQ (2010) Simultaneous design and planning of supply chains with reverse flows: a generic modelling framework. Eur J Oper Res 203:336–349. https://doi.org/10.1016/j.ejor.2009.08.002
Salema MIG, Barbosa-Póvoa AP, Novais AQ (2009) A strategic and tactical model for closed-loop supply chains. OR Spectr 31:573–599. https://doi.org/10.1007/s00291-008-0160-5
Salmasnia A, Cheraghi S, Ghorbanian A, Mokhtari H (2015) Robust supplier selection in a closed loop supply chain using a hybrid approach based on design of experiments and simulation. Int J Appl Decis Sci 8:304–322
Samuel CN, Venkatadri U, Diallo C, Khatab A (2020) Robust closed-loop supply chain design with presorting, return quality and carbon emission considerations. J Clean Prod 247:119086. https://doi.org/10.1016/j.jclepro.2019.119086
Santander P, Cruz Sanchez FA, Boudaoud H, Camargo M (2020) Closed loop supply chain network for local and distributed plastic recycling for 3D printing: a MILP-based optimization approach. Resour Conserv Recy 154:104531. https://doi.org/10.1016/j.resconrec.2019.104531
Saraeian S, Shirazi B, Motameni H (2019) Optimal autonomous architecture for uncertain processes management. Inform Sci 501:84–99. https://doi.org/10.1016/j.ins.2019.05.095
Sarkar B, Ullah M, Kim N (2017) Environmental and economic assessment of closed-loop supply chain with remanufacturing and returnable transport items. Comput Ind Eng 111:148–163. https://doi.org/10.1016/j.cie.2017.07.003
SasiKumar A, Natarajan K, Ramasubramaniam MS, Deepaknallasamy KK (2017) Optimal inventory policy in a closed loop supply chain system with multiple periods. J Ind Eng Manag 10:237–265. https://doi.org/10.3926/jiem.2205
Sasikumar P, Haq AN (2011) Integration of closed loop distribution supply chain network and 3PRLP selection for the case of battery recycling. Int J Prod Res 49:3363–3385. https://doi.org/10.1080/00207541003794876
Sasikumar P, Kannan G (2008) Issues in reverse supply chains, part II: reverse distribution issues—an overview. Int J Sustain Eng 1:234–249. https://doi.org/10.1080/19397030802509974
Seuring S, Gold S (2012) Conducting content-analysis based literature reviews in supply chain management. Supply Chain Manag An Int J 17:544–555. https://doi.org/10.1108/13598541211258609
Shahparvari S, Chhetri P, Chan C, Asefi H (2018) Modular recycling supply chain under uncertainty: a robust optimisation approach. Int J Adv Manuf Technol 96:915–934. https://doi.org/10.1007/s00170-017-1530-4
Shankar R, Bhattacharyya S, Choudhary A (2018) A decision model for a strategic closed-loop supply chain to reclaim end-of-life vehicles. Int J Prod Econ 195:273–286. https://doi.org/10.1016/j.ijpe.2017.10.005
Shekarian E (2020) A review of factors affecting closed-loop supply chain models. J Clean Prod 253:119823. https://doi.org/10.1016/j.jclepro.2019.119823
Sherafati M, Bashiri M (2016) Closed loop supply chain network design with fuzzy tactical decisions. J Ind Eng Int 12:255–269. https://doi.org/10.1007/s40092-016-0140-3
Sheriff KMM, Nachiappan S, Min H (2014) Combined location and routing problems for designing the quality-dependent and multi-product reverse logistics network. J Oper Res Soc 65:873–887. https://doi.org/10.1057/jors.2013.22
Shi J, Liu Z, Tang L, Xiong J (2016a) Multi-objective optimization for a closed-loop network design problem using an improved genetic algorithm. Appl Math Model 45:14–30. https://doi.org/10.1016/j.apm.2016.11.004
Shi J, Zhang G, Sha J (2011) Optimal production and pricing policy for a closed loop system. Resour Conserv Recycl 55:639–647. https://doi.org/10.1016/j.resconrec.2010.05.016
Shi X, Li Y, Long W (2016b) The integration model of closed-loop supply chain resource allocation considering remanufacturing. Front Eng Manag 3:132. https://doi.org/10.15302/J-FEM-2016026
Shu T, Liu Q, Chen S, Wang S, Lai KK (2018) Pricing decisions of CSR closed-loop supply chains with carbon emission constraints. Sustainability 10:4430. https://doi.org/10.3390/su10124430
Simchi-Levi D, Chen X, Bramel J (2014) The logic of logistics: theory, algorithms, and applications for logistics management, 2nd edn. Springer, New York
Soleimani H (2018) A new sustainable closed-loop supply chain model for mining industry considering fixed-charged transportation: A case study in a travertine quarry. Res Policy 11, Article in press. https://doi.org/10.1016/j.resourpol.2018.07.006
Soleimani H, Govindan K, Saghafi H, Jafari H (2017) Fuzzy multi-objective sustainable and green closed-loop supply chain network design. Comput Ind Eng 109:191–203. https://doi.org/10.1016/j.cie.2017.04.038
Soleimani H, Kannan G (2015) A hybrid particle swarm optimization and genetic algorithm for closed-loop supply chain network design in large-scale networks. Appl Math Model 39:3990–4012. https://doi.org/10.1016/j.apm.2014.12.016
Soleimani H, Seyyed-Esfahani M, Kannan G (2014) Incorporating risk measures in closed-loop supply chain network design. Int J Prod Res 52:1843–1867. https://doi.org/10.1080/00207543.2013.849823
Soleimani H, Seyyed-Esfahani M, Shirazi MA (2013) Designing and planning a multi-echelon multi-period multi-product closed-loop supply chain utilizing genetic algorithm. Int J Adv Manuf Technol 68:917–931. https://doi.org/10.1007/s00170-013-4953-6
Srinivasan S, Khan SH (2018) Multi-stage manufacturing/re-manufacturing facility location and allocation model under uncertain demand and return. Int J Adv Manuf Technol 94:2847–2860. https://doi.org/10.1007/s00170-017-1066-7
Steeneck DW, Sarin SC (2017) Determining end-of-life policy for recoverable products. Int J Prod Res 55:5782–5800. https://doi.org/10.1080/00207543.2017.1334977
Stevens GC (1989) Integrating the supply chain. Int J Phys Distrib Logist Manag 19:3–8. https://doi.org/10.1108/EUM0000000000329
Stindt D, Sahamie R (2014) Review of research on closed loop supply chain management in the process industry. Flex Serv Manuf J 26:268–293. https://doi.org/10.1007/s10696-012-9137-4
Subramanian P, Ramkumar N, Narendran TT, Ganesh K (2013) PRISM: PRIority based SiMulated annealing for a closed loop supply chain network design problem. Appl Soft Comput 13:1121–1135. https://doi.org/10.1016/j.asoc.2012.10.004
Subramanian P, Ramkumar N, Narendran TT, Ganesh K (2012) A technical note on ‘Analysis of closed loop supply chain using genetic algorithm and particle swarm optimisation.’ Int J Prod Res 50:593–602. https://doi.org/10.1080/00207543.2011.593348
Subulan K, Baykasoʇlu A, Özsoydan FB, Taşan AS, Selim H (2015a) A case-oriented approach to a lead/acid battery closed-loop supply chain network design under risk and uncertainty. J Manuf Syst 37:340–361. https://doi.org/10.1016/j.jmsy.2014.07.013
Subulan K, Baykasoʇlu A, Saltabaş A (2014) An improved decoding procedure and seeker optimization algorithm for reverse logistics network design problem. J Intell Fuzzy Syst 27:2703–2714. https://doi.org/10.3233/IFS-141335
Subulan K, Tasan AS (2013) Taguchi method for analyzing the tactical planning model in a closed-loop supply chain considering remanufacturing option. Int J Adv Manuf Technol 66:251–269. https://doi.org/10.1007/s00170-012-4322-x
Subulan K, Taşan AS, Baykasoğlu A (2015b) Designing an environmentally conscious tire closed-loop supply chain network with multiple recovery options using interactive fuzzy goal programming. Appl Math Model 39:2661–2702. https://doi.org/10.1016/j.apm.2014.11.004
Subulan K, Taşan AS, Baykasoǧlu A (2012) Fuzzy mixed integer programming model for medium-term planning in a closed-loop supply chain with remanufacturing option. J Intell Fuzzy Syst 23:345–368. https://doi.org/10.3233/IFS-2012-0525
Subulan K, Taşan AS, Baykasoʇlu A (2015c) A fuzzy goal programming model to strategic planning problem of a lead/acid battery closed-loop supply chain. J Manuf Syst 37:243–264. https://doi.org/10.1016/j.jmsy.2014.09.001
Sundar RT, Lakshminarayanan S, Forbes JF (2013) Divide and conquer optimization for closed loop supply chains. Ind Eng Chem Res 52:16267–16283. https://doi.org/10.1021/ie400742s
Tahirov N, Hasanov P, Jaber MY (2016) Optimization of closed-loop supply chain of multi-items with returned subassemblies. Int J Prod Econ 174:1–10. https://doi.org/10.1016/j.ijpe.2016.01.004
Talaei M, Moghaddam BF, Pishvaee MS, Bozorgi-Amiri A, Gholamnejad S (2016) A robust fuzzy optimization model for carbon-efficient closed-loop supply chain network design problem: A numerical illustration in electronics industry. J Clean Prod 113:662–673. https://doi.org/10.1016/j.jclepro.2015.10.074
Taleizadeh AA, Haghighi F, Niaki STA (2019) Modeling and solving a sustainable closed loop supply chain problem with pricing decisions and discounts on returned products. J Clean Prod 207:163. https://doi.org/10.1016/j.jclepro.2018.09.198
Taleizadeh AA, Haji-Sami E, Noori-daryan M (2020a) A robust optimization model for coordinating pharmaceutical reverse supply chains under return strategies. Ann Oper Res 291(1–2):875–896. https://doi.org/10.1007/s10479-019-03200-7
Taleizadeh AA, Karimi Mamaghan M, Torabi SA (2020b) A possibilistic closed-loop supply chain: pricing, advertising and remanufacturing optimization. Neural Comput Appl 32(4):1195–1215. https://doi.org/10.1007/s00521-018-3646-3
Taleizadeh AA, Mamaghan MK, Torabi SA (2018a) A possibilistic closed-loop supply chain: pricing, advertising and remanufacturing optimization. Neural Comput Appl 3:21. https://doi.org/10.1007/s00521-018-3646-3
Taleizadeh AA, Moshtagh MS (2018) A consignment stock scheme for closed loop supply chain with imperfect manufacturing processes, lost sales, and quality dependent return: multi levels structure. Int J Prod Econ. https://doi.org/10.1016/j.ijpe.2018.04.010
Taleizadeh AA, Moshtagh MS, Moon I (2018b) Pricing, product quality, and collection optimization in a decentralized closed-loop supply chain with different channel structures: game theoretical approach. J Clean Prod 189:406–431. https://doi.org/10.1016/j.jclepro.2018.02.209
Taleizadeh AA, Moshtagh MS, Moon I (2017) Optimal decisions of price, quality, effort level and return policy in a three-level closed-loop supply chain based on different game theory approaches. Eur J Ind Eng 11:486–525. https://doi.org/10.1504/EJIE.2017.086186
Tao ZG, Guang ZY, Hao S, Song HJ, Xin DG (2015) Multi-period closed-loop supply chain network equilibrium with carbon emission constraints. Resour Conserv Recycl 104:354–365. https://doi.org/10.1016/j.resconrec.2015.07.016
Tavakkoli-Moghaddam R, Sadri S, Pourmohammad-Zia N, Mohammadi M (2015) A hybrid fuzzy approach for the closed-loop supply chain network design under uncertainty. J Intell Fuzzy Syst 28:2811–2826. https://doi.org/10.3233/IFS-151561
Tiwari A, Chang PC, Tiwari MK, Kandhway R (2016) A hybrid territory defined evolutionary algorithm approach for closed loop green supply chain network design. Comput Ind Eng 99:432–447. https://doi.org/10.1016/j.cie.2016.05.018
Tokhmehchi N, Makui A, Sadi-Nezhad S (2015) A hybrid approach to solve a model of closed-loop supply chain. Math Probl Eng 2015:18. https://doi.org/10.1155/2015/179102
Tonanont A, Yimsiri S, Jitpitaklert W, Rogers KJ (2008) Performance evaluation in reverse logistics with data envelopment analysis. In: Industrial engineering research conference, pp 764–770
Torkaman S, Fatemi GSM, Karimi B (2017) Multi-stage multi-product multi-period production planning with sequence-dependent setups in closed-loop supply chain. Comput Ind Eng 113:602–613. https://doi.org/10.1016/j.cie.2017.09.040
Torkaman S, Fatemi GSMT, Karimi B (2018) Hybrid simulated annealing and genetic approach for solving a multi-stage production planning with sequence-dependent setups in a closed-loop supply chain. Appl Soft Comput 71:1085–1104. https://doi.org/10.1016/j.asoc.2017.10.019
Tosarkani BM, Amin SH (2018) A possibilistic solution to configure a battery closed-loop supply chain: multi-objective approach. Expert Syst With Appl Appl 92:12–26. https://doi.org/10.1016/j.eswa.2017.09.039
Tosarkani BM, Amin SH (2019) An environmental optimization model to configure a hybrid forward and reverse supply chain network under uncertainty. Comput Chem Eng 121:540–555. https://doi.org/10.1016/j.compchemeng.2018.11.014
Trochu J, Chaabane A, Ouhimmou M (2018) Reverse logistics network redesign under uncertainty for wood waste in the CRD industry. Resour Conserv Recycl 128:32–47. https://doi.org/10.1016/j.resconrec.2017.09.011
Tsao YC, Linh VT, Lu JC (2017) Closed-loop supply chain network designs considering RFID adoption. Comput Ind Eng 113:716–726. https://doi.org/10.1016/j.cie.2016.09.016
Tsao Y, Linh V, Lu J, Yu V (2018) A supply chain network with product remanufacturing and carbon emission considerations : a two-phase design. J Intell Manuf 29:693–705. https://doi.org/10.1007/s10845-017-1296-4
Turki S, Didukh S, Sauvey C, Rezg N (2017) Optimization and analysis of a manufacturing–remanufacturing–transport–warehousing system within a closed-loop supply chain. Sustainability 9:561. https://doi.org/10.3390/su9040561
Üster H, Hwang SO (2017) Closed-loop supply chain network design under demand and return uncertainty. Transp Sci 51:1063–1085. https://doi.org/10.1287/trsc.2015.0663
Vahdani B (2015) An optimization model for multi-objective closed-loop supply chain network under uncertainty: a hybrid fuzzy-stochastic programming method. Iran J Fuzzy Syst 12:33–57
Vahdani B, Mohammadi M (2015) A bi-objective interval-stochastic robust optimization model for designing closed loop supply chain network with multi-priority queuing system. Int J Prod Econ 170:67–87. https://doi.org/10.1016/j.ijpe.2015.08.020
Vahdani B, Razmi J, Tavakkoli-Moghaddam R (2012a) Fuzzy possibilistic modeling for closed loop recycling collection networks. Environ Model Assess 17:623–637. https://doi.org/10.1007/s10666-012-9313-7
Vahdani B, Tavakkoli-Moghaddam R, Jolai F, Baboli A (2013) Reliable design of a closed loop supply chain network under uncertainty: an interval fuzzy possibilistic chance-constrained model. Eng Optim 45:745–765. https://doi.org/10.1080/0305215X.2012.704029
Vahdani B, Tavakkoli-Moghaddam R, Modarres M, Baboli A (2012b) Reliable design of a forward/reverse logistics network under uncertainty: a robust-M/M/c queuing model. Transp Res Part E Logist Transp Rev 48:1152–1168. https://doi.org/10.1016/j.tre.2012.06.002
van Loon P, van Wassenhove LN (2018) Assessing the economic and environmental impact of remanufacturing: a decision support tool for OEM suppliers. Int J Prod Res 56:1662–1674. https://doi.org/10.1080/00207543.2017.1367107
Vieira PF, Vieira SM, Gomes MI, Barbosa-Póvoa AP, Sousa JMC (2015) Designing closed-loop supply chains with nonlinear dimensioning factors using ant colony optimization. Soft Comput 19:2245–2264. https://doi.org/10.1007/s00500-014-1405-7
Vimal KEK, Rajak S, Kandasamy J (2019) Analysis of network design for a circular production system using multi-objective mixed integer linear programming model. J Manuf Tech Manage 30(3):628–646. https://doi.org/10.1108/JMTM-02-2018-0058
Wang HF, Hsu HW (2010) A closed-loop logistic model with a spanning-tree based genetic algorithm. Comput Oper Res 37:376–389. https://doi.org/10.1016/j.cor.2009.06.001
Wang HF, Huang YS (2013) A two-stage robust programming approach to demand-driven disassembly planning for a closed-loop supply chain system. Int J Prod Res 51:2414–2432. https://doi.org/10.1080/00207543.2012.737940
Wang JJ, Chen H, Rogers DS, Ellram LM, Grawe SJ (2017) A bibliometric analysis of reverse logistics research (1992–2015) and opportunities for future research. Int J Phys Distrib Logist Manag 47:666–687. https://doi.org/10.1108/IJPDLM-10-2016-0299
Wang J, Zhou Y, Wang Y, Zhang J, Chen CLP, Zheng Z (2016a) Multiobjective vehicle routing problems with simultaneous delivery and pickup and time windows: formulation, instances, and algorithms. IEEE Trans Cybern 46:582–594. https://doi.org/10.1109/TCYB.2015.2409837
Wang S, Wang Z (2016) A closed-loop supply chain supernetwork based on disruption risks in dynamic environment. ICIC Express Lett 10:1971–1977
Wang Y, Chen Y (2015) Modeling stochastic closed-loop supply chain for deteriorating products under risk-averse criterion. J Uncertain Syst 9:243–250
Wang Y, Shi Q (2019) spare parts closed-loop logistics network optimization problems: model formulation and meta-heuristics solution. IEEE access 7:45048–45060. https://doi.org/10.1109/ACCESS.2019.2909326
Wang Z, Soleimani H, Kannan D, Xu L (2016b) Advanced cross-entropy in closed-loop supply chain planning. J Clean Prod 135:201–213. https://doi.org/10.1016/j.jclepro.2016.04.006
Wei J, Govindan K, Li Y, Zhao J (2015) Pricing and collecting decisions in a closed-loop supply chain with symmetric and asymmetric information. Comput Oper Res 54:257–265. https://doi.org/10.1016/j.cor.2013.11.021
Wei J, Zhao J (2011) Pricing decisions with retail competition in a fuzzy closed-loop supply chain. Expert Syst Appl 38:11209–11216. https://doi.org/10.1016/j.eswa.2011.02.168
Wu G, Chang C, Hsu L (2018) Comparisons of interactive fuzzy programming approaches for closed-loop supply chain network design under uncertainty. Comput Ind Eng 125:500–513. https://doi.org/10.1016/j.cie.2018.09.022
Wu X, Ryan SM (2014) Joint optimization of asset and inventory management in a product-service system. Eng Econ 59:91–115. https://doi.org/10.1080/0013791X.2013.873844
Wu Z, Kwong CK, Aydin R, Tang J (2017) A cooperative negotiation embedded NSGA-II for solving an integrated product family and supply chain design problem with remanufacturing consideration. Appl Soft Comput 57:19–34. https://doi.org/10.1016/j.asoc.2017.03.021
Xu J, Liu N (2017) Research on closed loop supply chain with reference price effect. J Intell Manuf 28:51–64. https://doi.org/10.1007/s10845-014-0961-0
Xu Z, Pokharel S, Elomri A, Mutlu F (2017) Emission policies and their analysis for the design of hybrid and dedicated closed-loop supply chains. J Clean Prod 142:4152–4168. https://doi.org/10.1016/j.jclepro.2016.09.192
Yadegari M, Tavakkoli-Moghaddam R, Ahmadi G (2018) Closed-loop supply chain inventory-location problem with spare parts in a multi-modal repair condition. Int J Eng Trans B Appl 31:346–356
Yamzon A, Ventura V, Guico P, Sy C (2016) Optimal planning of incentive-based quality in closed-loop supply chains. Clean Technol Environ Policy 18:1415–1431. https://doi.org/10.1007/s10098-016-1103-5
Yan NN, Sun BW (2012) Optimal stackelberg strategies for closed-loop supply chain with third-party reverse logistics. Asia-Pacific J Oper Res 29:21. https://doi.org/10.1142/S0217595912500261
Yang GF, Wang ZP, Li XQ (2009) The optimization of the closed-loop supply chain network. Transp Res Part E Logist Transp Rev 45:16–28. https://doi.org/10.1016/j.tre.2008.02.007
Yang PC, Chung SL, Wee HM, Zahara E, Peng CY (2013) Collaboration for a closed-loop deteriorating inventory supply chain with multi-retailer and price-sensitive demand. Int J Prod Econ 143:557–566. https://doi.org/10.1016/j.ijpe.2012.07.020
Yang PC, Wee HM, Chung SL, Ho PC (2010) Sequential and global optimization for a closed-loop deteriorating inventory supply chain. Math Comput Model 52:161–176. https://doi.org/10.1016/j.mcm.2010.02.005
Yang Y, Huang Z, Qiang QP, Zhou G (2017) A mathematical programming model with equilibrium constraints for competitive closed-loop supply chain network design. Asia-Pac J Oper Res 34:1750026. https://doi.org/10.1142/S0217595917500269
Yang YX, Niu L, Huang Z, Zhou G (2016) Closed-loop supply chain network redesigning model post the horizontal merger based on environmeantal responsibility. Int J Serv Technol Manag 22:179–202. https://doi.org/10.1504/IJSTM.2016.078548
Yavari M, Geraeli M (2019) Heuristic method for robust optimization model for green closed-loop supply chain network design of perishable goods. J Clean Prod 226:282–305. https://doi.org/10.1016/J.JCLEPRO.2019.03.279
Yi P, Huang M, Guo L, Shi T (2016) A retailer oriented closed-loop supply chain network design for end of life construction machinery remanufacturing. J Clean Prod 124:191–203. https://doi.org/10.1016/j.jclepro.2016.02.070
Yildizbaşi A, Çalik A, Paksoy T, Zanjirani Farahani R, Weber GW (2018) Multi-level optimization of an automotive closed-loop supply chain network with interactive fuzzy programming approaches. Technol Econ Dev Econ 24:1004–1028. https://doi.org/10.3846/20294913.2016.1253044
Yoo JS, Hong SR, Kim CO (2009) Service level management of nonstationary supply chain using direct neural network controller. Expert Syst Appl 36:3574–3586. https://doi.org/10.1016/j.eswa.2008.02.005
Yuan KF, Gao Y (2010) Inventory decision-making models for a closed-loop supply chain system. Int J Prod Res 48:6155–6187. https://doi.org/10.1080/00207540903173637
Zarei H, Rasti-Barzoki M (2019) Mathematical programming and three metaheuristic algorithms for a bi-objective supply chain scheduling problem. Neural Comput Appl 31(12):9073–9093. https://doi.org/10.1007/s00521-018-3898-y
Zeballos LJ, Gomes MI, Barbosa-Povoa AP, Novais AQ (2012) Addressing the uncertain quality and quantity of returns in closed-loop supply chains. Comput Chem Eng 47:237–247. https://doi.org/10.1016/j.compchemeng.2012.06.034
Zeballos LJ, Méndez CA, Barbosa-Povoa AP (2018) Integrating decisions of product and closed-loop supply chain design under uncertain return flows. Comput Chem Eng 112:211–238. https://doi.org/10.1016/j.compchemeng.2018.02.011
Zeballos LJ, Méndez CA, Barbosa-Povoa AP (2016) Design and planning of closed-loop supply chains: a risk-averse multistage stochastic approach. Ind Eng Chem Res 55:6236–6249. https://doi.org/10.1021/acs.iecr.5b03647
Zeballos LJ, Méndez CA, Barbosa-Povoa AP, Novais AQ (2014) Multi-period design and planning of closed-loop supply chains with uncertain supply and demand. Comput Chem Eng 66:151–164. https://doi.org/10.1016/j.compchemeng.2014.02.027
Zhalechian M, Tavakkoli-Moghaddam R, Zahiri B, Mohammadi M (2016) Sustainable design of a closed-loop location-routing-inventory supply chain network under mixed uncertainty. Transp Res Part E Logist Transp Rev 89:182–214. https://doi.org/10.1016/j.tre.2016.02.011
Zhang FA, Da QL (2010) Decision model for closed loop supply chain with uncertain demand and price-dependent returns. J Southeast Univ 26:638–641
Zhang S, Zhao X, Zhang J (2014) Dynamic model and fuzzy robust control of uncertain closed-loop supply chain with time-varying delay in remanufacturing. Ind Eng Chem Res 53:9805–9811. https://doi.org/10.1021/ie404104c
Zhang Y, Zhou J (2016) Simulation and optimization of a system-dynamics model for quality control of a closed-loop supply chain. Int J Simul Syst Sci Technol 17:2.1-2.9. https://doi.org/10.5013/IJSSST.a.17.14.02
Zhang ZZ, Wang ZJ, Liu LW (2015) Retail services and pricing decisions in a closed-loop supply chain with remanufacturing. Sustainability 7:2373–2396. https://doi.org/10.3390/su7032373
Zhao R, Liu Y, Zhang Z, Guo S, Tseng M, Wu K (2018a) Enhancing eco-efficiency of agro-products’ closed-loop supply chain under the belt and road initiatives: a system dynamics approach. Sustainability 10:668. https://doi.org/10.3390/su10030668
Zhao X, Xia X, Wang L, Yu G (2018b) Risk-averse facility location for green closed-loop supply chain networks design under uncertainty. Sustainability 10:4072. https://doi.org/10.3390/su10114072
Zhen L, Huang L, Wang W (2019) Green and sustainable closed-loop supply chain network design under uncertainty. J Clean Prod 227:1195–1209. https://doi.org/10.1016/j.jclepro.2019.04.098
Zhou W, Piramuthu S (2013) Remanufacturing with RFID item-level information: optimization, waste reduction and quality improvement. Int J Prod Econ 145:647–657. https://doi.org/10.1016/j.ijpe.2013.05.019
Zhou X, Zhao Z, Zhou K, He C (2012) Remanufacturing closed-loop supply chain network design based on genetic particle swarm optimization algorithm. J Cent South Univ 19:482–487. https://doi.org/10.1007/s11771-012-1029-y
Zhou Y, Chan CK, Wong KH, Lee YCE (2015) Intelligent optimization algorithms: a stochastic closed-loop supply chain network problem involving oligopolistic competition for multiproducts and their product flow routings. Math Probl Eng 2015:22. https://doi.org/10.1155/2015/918705
Zhu XD, Li BY, Wang Z (2017) A study on the manufacturing decision-making and optimization of hybrid-channel supply chain for original equipment manufacturer. Adv Prod Eng Manag 12:185–195. https://doi.org/10.14743/apem2017.2.250
Zohal M, Soleimani H (2016) Developing an ant colony approach for green closed-loop supply chain network design: a case study in gold industry. J Clean Prod 133:314–337. https://doi.org/10.1016/j.jclepro.2016.05.091
Zou H, Qin J, Yang P, Dai B (2018) A coordinated revenue-sharing model for a sustainable closed-loop supply chain. Sustainability 10:3198. https://doi.org/10.3390/su10093198
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Appendix
Appendix
Amount of published | Data collection journals |
|---|---|
Over 20 papers | Journal of Cleaner Production; International Journal of Production Research |
10–20 papers | Applied Mathematical Modelling; International Journal of Advanced Manufacturing Technology; Sustainability; Computers & Industrial Engineering; International Journal of Production Economics; Mathematical Problems in Engineering; Transportation Research—Part E |
5–9 papers | Annals of Operation Research; Expert Systems with Applications; Computers and Chemical Engineering; Journal of Manufacturing Systems; Applied Soft Computing; European Journal of Operational Research; International Journal of Engineering; Neural Computing and Applications; Resources, Conservation and Recycling |
3–4 papers | Scientia Iranica; Computers & Operations Research; Human and Ecological Risk Assessment; Industrial & Engineering Chemistry Research; Journal of Industrial and Production Engineering; Journal of Industrial Engineering International; Journal of Intelligent & Fuzzy Systems; Journal of Intelligent Manufacturing; Journal of the Operational Research Society |
2 papers | Advances in Mechanical Engineering; Advances in Production Engineering & Management; Asia–Pacific Journal of Operational Research; Computers and Industrial Engineering; European Journal of Industrial Engineering; Fuzzy Sets and Systems; IEEE Transactions on Engineering Management; Industrial Engineering and Management Systems; International Journal of Industrial and Systems Engineering; International Journal of Innovative Computing Information and Control; International Journal of Logistics Systems and Management; International Journal of Sustainable Engineering; Journal of Industrial Engineering and Management; Journal of Manufacturing Technology Management; Journal of Uncertain Systems; Manufacturing and Service Operations Management; Omega-International Journal of Management Science; Robotics and Computer-Integrated Manufacturing; Soft Computing; Technological and Economic Development of Economy; Transportation Research Part D; Transportation Science |
1 paper | Advanced Engineering Informatics; Advanced Science Letters; Advances in Mechanical Engineering; Advances in Modelling and Analysis A; AIChE Journal; Applied Energy; Applied Science; Central European Journal of Operations Research; Chaos Solitons & Fractals; Clean Technologies and Environmental Policy; Cluster Computing; Cogent Mathematics; Computational Intelligence; Computational and Mathematical Organization Theory; Computers & Chemical Engineering; Decision Sciences; Digital Manufacturing & Automation III; Discrete Dynamics in Nature and Society; Dyna; Energies; Engineering Economist; Engineering Optimization; Environmental Modeling & Assessment; Frontiers of Engineering Management; ICIC Express Letters; ICIC Express Letters, Part B; IEEE Access; IEEE Transactions on Cybernetics; Indian Journal of Science and Technology; Industrial Instrumentation and Control Systems; Industrial Management & Data Systems; Information Science; International Journal of Advanced Operations Management; International Journal of Applied Decision Sciences; International Journal of Applied Mathematics and Computer Science; International Journal of Business Performance and Supply Chain Modelling; International Journal of Computational Intelligence Systems; International Journal of Environment and Sustainable Development; International Journal of Environmental Research and Public Health; International Journal of Industrial Engineering Computations; International Journal of Industrial Engineering-Theory Applications and Practice; International Journal of Information and Management Sciences; International Journal of Information Systems and Supply Chain Management; International Journal of Management Science and Engineering Management; International Journal of Operational Research; International Journal of Production Management and Engineering; International Journal of Services and Operations Management; International Journal of Services, Technology and Management; International Journal of Simulation: Systems, Science and Technology; Iranian Journal of Fuzzy Systems; Journal of Advanced Transportation; Jordan Journal of Mechanical and Industrial Engineering; Journal of Advanced Manufacturing Systems; Journal of Advanced Mechanical Design Systems and Manufacturing; Journal of Business Economics; Journal of Central South University of Technology; Journal of Combinatorial Optimization; Journal of Computational and Theoretical Nanoscience; Journal of Computer and Systems Sciences International; Journal of Engineering Science and Technology Review; Journal of Global Optimization; Journal of Industrial and Management Optimization; Journal of Japan Industrial Management Association; Journal of Optimization in Industrial Engineering; Journal of Manufacturing Science and Engineering-Transactions of the Asme; Journal of Mechanical Design; Journal of Modelling in Management; Journal of Renewable and Sustainable Energy; Journal of Southeast University; Knowledge-Based Systems; Mathematical and Computer Modelling; Networks & Spatial Economics; Operational Research; Operations Research Perspectives; Opsearch; Optimization; Or Spectrum; Plos One; Production Engineering; Resources Policy; Sãdhanã; Simulation Modelling Practice and Theory; Stochastic Models; Uncertain Supply Chain Management; Waste Management and Research; 4OR |
Rights and permissions
About this article
Cite this article
Oliveira, L.S., Machado, R.L. Application of optimization methods in the closed-loop supply chain: a literature review. J Comb Optim 41, 357–400 (2021). https://doi.org/10.1007/s10878-020-00677-y
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10878-020-00677-y