Abstract
Eutectic Al2O3/GdAlO3 composites in the form of fibers were produced by the laser heated pedestal growth technique at high pulling rates ranging from 48 to 240 mm/h. Fibers 0.8 mm in diameter and 25 mm in length, devoid of pores or cracks, were pulled in an air atmosphere without seeding or pedestal rotation. “Chinese script” and complex-regular microstructures were present in all the fibers. The Jackson–Hunt relationship, λ2 v = constant, applied very well to the eutectic Al2O3/GdAlO3 fibers. The modulus of rupture values varied from 800 to 1,780 MPa. The effects of high pulling rate, average phase spacing and modulus of rupture on the microstructure were studied.
Similar content being viewed by others
References
Epelbaum BM, Yoshikawa A, Shimamura K, Fukuda T, Suzuki K, Waku Y (1999) J Cryst Growth 199:471
Larrea A, de la Fuente GF, Merino RI, Orera VM (2002) J Eur Ceram Soc 22:191
Lee JH, Yoshikawa A, Durbin SD, Yoon DH, Fukuda T, Waku Y (2001) J Cryst Growth 222:791
Lee JH, Yoshikawa A, Kaiden H, Lebbou K, Fukuda T, Yoon DH, Waku Y (2001) J Cryst Growth 231:179
Waku Y, Nakagawa N, Wakamoto T, Ohtsubo H, Shimizu K, Kohtoku Y (1997) Nature 389:49
Andreeta ERM, Andreeta MRB, Hernandes AC (2002) J Cryst Growth 234:782
Yoshikawa A, Epelbaum BM, Hasegawa K, Durbin SD, Fukuda T (1999) J Cryst Growth 205:305
Yoshikawa A, Hasegawa K, Lee JH, Durbin SD, Epelbaum BM, Yoon DH, Fukuda T, Waku Y (2000) J Cryst Growth 218:67
Andreeta ERM, Rodrigues JA, Andreeta MRB, Agullo-Rueda F, Hernandes AC, (2002) Cerâmica 48:29
Dörre E, Hübner H (1984) Alumina processing, properties, and applications. Springer-Verlag, Berlin
Andreeta ERM (2002) Solidificação direcional de compostos eutéticos de óxidos refratários usando método de fusão a laser. Thesis, Universidade de São Paulo, São Carlos
Jackson KA, Hunt JD (1966) Trans Metallurg Soc AIME 236:1129
Medeiros IS (2004) Fibras de Al2O3/GdAlO3 obtidas por fusão a laser para aplicações odontológicas. Thesis, Universidade de São Paulo, São Carlos
Medeiros IS, Hernandes AC (2004) Universidade de São Paulo assignee, Processo de obtenção de fibras cerâmicas eutéticas cristalinas para uso médico-odontológico e fibras cerâmicas assim obtidas. Brasil patent PI0402312-9
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Medeiros, I.S., Andreeta, E.R.M. & Hernandes, A.C. Al2O3/GdAlO3 eutectic fibers of high modulus of rupture produced by the laser heated pedestal growth technique. J Mater Sci 42, 3874–3877 (2007). https://doi.org/10.1007/s10853-006-0466-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-0466-0