Skip to main content
SpringerLink
Log in

Development of efficient and accurate skeletal mechanisms for hydrocarbon fuels and kerosene surrogate

  • Research Paper
  • Published:
Acta Mechanica Sinica Aims and scope Submit manuscript

Abstract

In this paper, the methodology of the directed relation graph with error propagation and sensitivity analysis (DRGEPSA), proposed by Niemeyer et al. (Combust Flame 157:1760–1770, 2010), and its differences to the original directed relation graph method are described. Using DRGEPSA, the detailed mechanism of ethylene containing 71 species and 395 reaction steps is reduced to several skeletal mechanisms with different error thresholds. The 25-species and 131-step mechanism and the 24-species and 115-step mechanism are found to be accurate for the predictions of ignition delay time and laminar flame speed. Although further reduction leads to a smaller skeletal mechanism with 19 species and 68 steps, it is no longer able to represent the correct reaction processes. With the DRGEPSA method, a detailed mechanism for n-dodecane considering low-temperature chemistry and containing 2115 species and 8157 steps is reduced to a much smaller mechanism with 249 species and 910 steps while retaining good accuracy. If considering only high-temperature (higher than 1000 K) applications, the detailed mechanism can be simplified to even smaller mechanisms with 65 species and 340 steps or 48 species and 220 steps. Furthermore, a detailed mechanism for a kerosene surrogate having 207 species and 1592 steps is reduced with various error thresholds and the results show that the 72-species and 429-step mechanism and the 66-species and 392-step mechanism are capable of predicting correct combustion properties compared to those of the detailed mechanism. It is well recognized that kinetic mechanisms can be effectively used in computations only after they are reduced to an acceptable size level for computation capacity and at the same time retaining accuracy. Thus, the skeletal mechanisms generated from the present work are expected to be useful for the application of kinetic mechanisms of hydrocarbons to numerical simulations of turbulent or supersonic combustion.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Wang, H., Laskin, A.: A Comprehensive kinetic model of ethylene and acetylene oxidation at high temperatures, Progress Report for an AFOSR New World Vista Program (1998)

  2. Curran, H., Gaffuri, P., Pitz, W., et al.: A comprehensive modeling study of n-heptane oxidation. Combust. Flame 114, 149–177 (1998)

    Article  Google Scholar 

  3. Westbrook, C.K., Pitz, W.J., Herbinet, O., et al.: A comprehensive detailed chemical kinetic reaction mechanism for combustion of \(n\)-alkane hydrocarbons from \(n\)-octane to \(n\)-hexadecane. Combust. Flame 156, 181–199 (2009)

    Article  Google Scholar 

  4. Tishkoff, J.M., Drummond, J.P., Edwards, T.: Future directions of supersonic combustion research, Air Force/NASA Workshop on Supersonic Combustion, AIAA Paper 1997–1017 (1997)

  5. Lu, T., Law, C.K.: Toward accommodating realistic fuel chemistry in large-scale computations. Prog. Energy Combust. Sci. 35, 192–215 (2009)

    Article  Google Scholar 

  6. Pope, S.B.: Small scales, many species and the manifold challenges of turbulent combustion. Proc. Combust. Inst. 34, 1–31 (2013)

    Article  Google Scholar 

  7. Rabitz, H., Kramer, M., Dacol, D.: Sensitivity analysis in chemical kinetics. Ann. Rev. Phys. Chem. 34, 419–461 (1983)

    Article  Google Scholar 

  8. Turányi, T.: Sensitivity analysis of complex kinetic systems, tools and applications. J. Math. Chem. 5, 203–248 (1990)

  9. Lam, S.H.: Using CSP to understand complex chemical kinetics. Combust. Sci. Technol. 89, 375–404 (1993)

    Article  Google Scholar 

  10. Peters, N., Rogg, B.: Reduced Kinetic Mechanisms for Applications in Combustion Systems. Springer, Berlin (1993)

    Book  Google Scholar 

  11. Chen, J.-Y.: Development of reduced mechanisms for numerical modelling of turbulent combustion. Workshop on Numerical Aspects of Reduction in Chemical Kinetics, CERNICS-ENPC, Cite Descartes, Champus sur Marne, France (1997)

  12. Montgomery, C.J., Zhao, W., Tam, C.-J., et al.: CFD Simulation of a 3-D scramjet flameholder using reduced chemical kinetic mechanisms, AIAA 2003–3874 (2003)

  13. Zhong, F.-Q., Chen, L.-H., Li, F., et al.: Numerical simulation of ignition and combustion of ethylene in a supersonic model combustor with a reduced kinetic mechanism. Combust. Sci. Technol. 185, 548–563 (2013)

    Article  Google Scholar 

  14. Pope, S.B.: Computationally efficient implementation of combustion chemistry using in situ adaptive tabulation. Combust. Theory Model. 1, 41–63 (1997)

    Article  MathSciNet  MATH  Google Scholar 

  15. Lu, L., Pope, S.B.: An improved algorithm for in situ adaptive tabulation. J. Comput. Phys. 228, 361–386 (2009)

    Article  MathSciNet  MATH  Google Scholar 

  16. Pope, S.B., Ren, Z.: Efficient implementation of chemistry in computational combustion. Flow Turbul. Combust. 82, 437–453 (2009)

    Article  MATH  Google Scholar 

  17. Lu, T., Law, C.K.: A direct relation graph for mechanism reduction. Proc. Combust. Inst. 30, 1333–1341 (2005)

    Article  Google Scholar 

  18. Lu, T., Law, C.K.: On the applicability of directed relation graphs to the reduction of reaction mechanisms. Combust. Flame 146, 472–483 (2006)

    Article  Google Scholar 

  19. Lu, T., Law, C.K.: Linear time reduction of large kinetic mechanisms with directed relation graph: \(n\)-heptane and iso-octane. Combust. Flame 144, 24–36 (2006)

    Article  Google Scholar 

  20. Pepiot-Desjardins, P., Pitsch, H.: An efficient error-propagation-based reduction method for large chemical kinetic mechanisms. Combust. Flame 154, 67–81 (2008)

    Article  MATH  Google Scholar 

  21. Niemeyer, K.E., Sung, C.-J., Raju, M.P.: Skeletal mechanism generation for surrogate fuels using directed relation graph with error propagation and sensitivity analysis. Combust. Flame 157, 1760–1770 (2010)

    Article  Google Scholar 

  22. Niemeyer, K.E., Sung, C.-J.: On the importance of graph search algorithms for DRGEP-based mechanism reduction methods. Combust. Flame 158, 1439–1443 (2011)

    Article  Google Scholar 

  23. Liang, L., Stevens, J.G., Farrell, J.T.: A dynamic adaptive chemistry scheme for reactive flow computations. Proc. Combust. Inst. 32, 527–534 (2009)

    Article  Google Scholar 

  24. Liang, L., Stevens, J.G., Raman, S., et al.: The use of dynamic adaptive chemistry in combustion simulation of gasoline surrogate fuels. Combust. Flame 156, 1493–1502 (2009)

    Article  Google Scholar 

  25. Yang, H., Ren, Z., Lu, T., et al.: Dynamic adaptive chemistry for turbulent flame simulations. Combust. Theory Model. 17, 167–183 (2013)

    Article  MATH  Google Scholar 

  26. Shi, Y., Liang, L., Ge, H.-W., et al.: Acceleration of the chemistry solver for modeling DI engine combustion using dynamic adaptive chemistry (DAC) schemes. Combust. Theory Model. 14, 69–89 (2010)

    Article  MATH  Google Scholar 

  27. Ren, Z., Liu, Y., Lu, T., et al.: The use of dynamic adaptive chemistry and tabulation in reactive flow simulations. Combust. Flame 161, 127–137 (2014)

  28. Dagaut, P.: On the kinetics of hydrocarbons oxidation from natural gas to kerosene and diesel fuel. Phys. Chem. Chem. Phys. 4, 2079–2094 (2002)

    Article  Google Scholar 

  29. Zheng, X.L., Lu, T.F., Law, C.K.: Experimental counterflow ignition temperatures and reaction mechanisms of 1, 3-butadiene. Proc. Combust. Inst. 31, 367–375 (2007)

    Article  Google Scholar 

  30. Saxena, S., Kahandawala, M.S.P., Sidhu, S.: A shock tube study of ignition delay in the combustion of ethylene. Combust. Flame 158, 1019–1031 (2011)

    Article  Google Scholar 

  31. Gibbs, G.J., Calcote, H.F.: Effect of molecular structure on burning velocity. J. Chem. Eng. Data 4, 226–237 (1959)

    Article  Google Scholar 

  32. Egolfopoulos, F.N., Zhu, D.L., Law, C.K.: Experimental and numerical determination of laminar flame speeds: mixtures of c2 hydrocarbons with oxygen and nitrogen, The 23rd Symposium (International) on Combustion 23, 471–478 (1991)

  33. Zhong, F.-Q., Fan, X.-J., Yu, G., et al.: Performance of supersonic model combustors with staged injections of supercritical aviation kerosene. Acta Mech. Sin. 26, 661–668 (2010)

    Article  Google Scholar 

  34. Fan, X.-J., Yu, G., Li, J.-G., et al.: Investigation of vaporized kerosene injection and combustion in a supersonic model combustor. J. Propuls. Power 22, 103–110 (2006)

    Article  Google Scholar 

Download references

Acknowledgments

This work was supported by the National Natural Science Foundation of China (Grant 11172309). The authors would like to thank Professor Gong Yu of Chinese Academy of Sciences for his help in this work. Chih-Jen Sung is also supported by the China’s Programme of Introducing Talents of Discipline to Universities—111 Project under Grant No. B08009 and the Thousand Talents Program.

Author information

Authors and Affiliations

  1. State Key Laboratory of High Temperature Gas Dynamics, Institute of Mechanics, Chinese Academy of Sciences, Beijing, 100190, China

    Fengquan Zhong, Sugang Ma & Xinyu Zhang

  2. Department of Mechanical Engineering, University of Connecticut, Storrs, CT, USA

    Chih-Jen Sung

  3. School of Mechanical, Industrial, and Manufacturing Engineering, Oregon State University, Corvallis, OR, USA

    Kyle E. Niemeyer

Authors
  1. Fengquan Zhong
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Sugang Ma
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Xinyu Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Chih-Jen Sung
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Kyle E. Niemeyer
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Fengquan Zhong.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhong, F., Ma, S., Zhang, X. et al. Development of efficient and accurate skeletal mechanisms for hydrocarbon fuels and kerosene surrogate. Acta Mech. Sin. 31, 732–740 (2015). https://doi.org/10.1007/s10409-015-0434-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10409-015-0434-5

Keywords

Search

Navigation