Skip to main content
Log in

Survey of quantity and management condition of end-of-life tires in Iran: a case study in Tabriz

  • ORIGINAL ARTICLE
  • Published:
Journal of Material Cycles and Waste Management Aims and scope Submit manuscript

Abstract

Once a tire is removed from a vehicle without the possibility of being remounted for continued on-road use, it is defined as waste and called end-of-life tire (ELT). ELTs are non-biodegradable, cannot be compressed and occupy large amount of space in landfills. Dumped tires provide breeding grounds for vectors and rodents and are susceptible to fire hazards. Numerous actions have been taken to manage ELTs worldwide; however, in Iran, there has not been much attention given to the issue. The goal of this study was to survey quantity and management conditions of ELTs and present managing principles according to the environmental and health aspects in Iran (a case study in Tabriz). The amount of ELTs in Iran was estimated by considering the production, import, export and life of tires. Next the current ELT management condition in Tabriz City was investigated using a checklist, observation, site visiting and interview. Then by considering scientific sources and also, according to experiences in other countries and current conditions, managing principles were suggested. Results showed that 198,346–339,678 tonnes of ELTs have been produced in Iran during 2003–2015 that equals 2.95–4.52 kg per capita per year. The amount of ELTs has had almost increasing trend during last 13 years. About 6390 tonnes of ELTs annually in Tabriz City are landfilled or dumped, which can create great hazards to the health and environment. Based on the results of this study, for improving the current condition of ELTs, first, the ELT production must be reduced and then ELTs must be reused or recycled. Moreover, landfilling of ELTs should be banned gradually and extended producer responsibility (EPR) system must be implemented for their management.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Shulman VL (2004) Tyre recycling. Rapra Rev Rep 15(7):3–5

    Google Scholar 

  2. Torretta V, CristinaRada E, Ragazzi M, Trulli E, Istrate I (2015) Treatment and disposal of tires: two EU approaches: a review. Waste Manag 45:152–160

    Article  Google Scholar 

  3. Sienkiewcz M, Kucinska-Lipka J, Janik H, Balas A (2012) Progress in used tires management in the European Union: a review. Waste Manag 32:1742–1751

    Article  Google Scholar 

  4. Tchobanoglous G, Kreith F (2002) Handbook of solid waste management. McGraw-Hill, New York

    Google Scholar 

  5. Jang J, Yoo T, Oh J-H, Iwasaki I (1998) Discarded tire recycling practices in the United States, Japan and Korea. Resour Conserv Recycl 22:1–14

    Article  Google Scholar 

  6. Chang NB (2008) Economic and policy instrument analyses in support of the scrap tire recycling program in Taiwan. J Environ Manag 86:435–450

    Article  Google Scholar 

  7. Fiksel J, Bhavic RB, Anil B, Erika G, Bernhard D (2011) Comparative life cycle assessment of beneficial applications for scrap tires. Clean Technol Environ Policy 13:19–35

    Article  Google Scholar 

  8. Edward LK, Mui D, Ko CK, McKay G (2004) Production of active carbons from waste tires: a review. Carbon 14:2789–2805

    Google Scholar 

  9. Lin C, Huangb C, Shern C (2008) Recycling waste tire powder for the recovery of oil spills. Resour Conserv Recycl 52:1162–1166

    Article  Google Scholar 

  10. Amari T, Themelis NJ, Wernick IK (1999) Resource recovery from used rubber tires. Resour Policy 25:179–188

    Article  Google Scholar 

  11. Li X, Xu H, Gao Y, Tao Y (2010) Comparison of end-of-life tire treatment technologies: a Chinese case study. Waste Manag 30:2235–2246

    Article  Google Scholar 

  12. Adhikari B, De D, Maiti S (2000) Reclamation and recycling of waste rubber. Prog Polym Sci 25:909–948

    Article  Google Scholar 

  13. Williams P (2013) Pyrolysis of waste tyres: a review. Waste Manag 33:1714–1728

    Article  Google Scholar 

  14. Siddique R, Naik TR (2004) Properties of concrete containing scrap tire rubber: an overview. Waste Manag 24:563–569

    Article  Google Scholar 

  15. Yoon S, Prezzi M, Siddiki N, Kim B (2006) Construction of a test embankment using a sand-tire shred mixture as fill material. Waste Manag 26:1033–1044

    Article  Google Scholar 

  16. Aiello MA, Leuzzi F, Centonze G, Maffezzoli A (2009) Use of steel fibers recovered from waste tire as reinforcement pull-out behavior, compressive and flexural strength. Waste Manag 29:1960–1970

    Article  Google Scholar 

  17. Ganjian E, Khorami M, Maghsoudi A (2009) Scrap tire rubber replacement for aggregate and filler in concrete. Constr Build Mater 23:1828–1836

    Article  Google Scholar 

  18. Zanetti MC, Fiore S, Ruffino B, Santagata E, Dalmazzo D, Lanotte M (2015) Characterization of crumb rubber from end-of-life tires for paving applications. Waste Manag 45:161–170

    Article  Google Scholar 

  19. Samadian F (2006) Report of scrap tire recycling, Ministry of Industries and Mines, Islamic Republic of Iran (in Persian)

  20. Recycle Organization of Mashhad Municipality. https://wmo.mashhad.ir/portalcontent. Accessed 12 July 2016

  21. Statistical Center of Iran (2016) https://www.amar.org.ir/Default.asp. Accessed 1 June 2016

  22. http://www.irica.gov.ir/Portal/Home/Default.aspx?Category. Accessed 20 May 2016 (Persian)

  23. Shaeri M, Rahmati A (2012) Human’s environmental laws, regulations, criteria and standards. Department of Environment (in Persian), Iran

  24. Taghipour H, Nowrouz P, Asghari Jafarabadi M, Nazari J, Asl Hashemi A, Mosaferi M, Dehghanzadeh R (2012) E-waste management challenges in Iran: presenting some strategies for improvement of current conditions. Waste Manag Res 30(11):1138–1144

    Article  Google Scholar 

  25. Ferrao P, Rebeiro P, Silva P (2007) A management system for end-of-life tyres: a Portuguese case study. Waste Manag 28:604–614

    Article  Google Scholar 

  26. RMA, Rubber Manufacturers Association (USA) (2016) 2015 USA scape tire managementsummary. https://rma.org/sites/default/files/RMA_scraptire_summ_2015.pdf. Accessed 9 Apr 2016

  27. Uruburu A, Ponce-cueto E, Cobo-Benita JR, Ordieres-Mere J (2013) The new challenges of end-of-life tyres management systems: a Spanish case study. Waste Manag 33:679–688

    Article  Google Scholar 

  28. JATMA, Japan Automobile Tire Manufacturers Association (2015) Tire Industry of Japan. http://www.jatma.or.jp/english. Accessed 25 July 2016

Download references

Acknowledgements

The authors wish to thank the University of Tabriz and all the members of the research team and others who participated in this study.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Hassan Taghipour.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zarei, M., Taghipour, H. & Hassanzadeh, Y. Survey of quantity and management condition of end-of-life tires in Iran: a case study in Tabriz. J Mater Cycles Waste Manag 20, 1099–1105 (2018). https://doi.org/10.1007/s10163-017-0674-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10163-017-0674-5

Keywords

Navigation