Improvement of the geoid in local areas by satellite gradiometry

Summary

Satellite gradiometry is studied as a means to improve the geoid in local areas from a limited data coverage. Least-squares collocation is used for this purpose because it allows to combine heterogeneous data in a consistent way and to estimate the integrated effect of the attenuated spectrum. In this way accuracy studies can be performed in a general and reliable manner.

It is shown that only three second-order gradients contribute significantly to the estimation of the geoidal undulations and that it is sufficient to have gradiometer data in a 5°×5° area around the estimation point. The accuracy of the geoid determination is strongly dependent on the degree and order of the reference field used. An accuracy of about ±1 m can be achieved with a reference field of (12, 12). There is an optimal satellite altitude for each reference field and this altitude may be higher than 300 km for a field of low degree and order. The influence of measuring errors is discussed and it is shown that only gradiometer data with accuracies better than ±0.05 E will give a significant improvement of the geoid. Finally, some results on the combination of satellite gradiometry and terrestrial gravity measurements are given.

The proposed method seems to be well suited for local geoid determinations down to the meter range. It is especially interesting for unsurveyed and difficult areas because no terrestrial measurements are necessary. Furthermore, it has the practical advantage that only a local data coverage is needed.