Abstract
A complete knowledge based procedure for the design and manufacture of a round hole broach tool is described. The knowledge based design system (KBDS) produces a tool specification from user inputs describing the task to be performed. These design results are then used by the knowledge base to generate a geometric CAD/CAM representation, which can be utilized directly to display a drawing of the tool or to generate a CNC program for producing it. The process of formulating a knowledge-based design system demonstrates: the integration of expertise from experts, handbooks and theory; the awareness of restrictions on the scope of design that can be handled by a given system: the use of failure handling mechanisms to detect design failures and either adjust the emerging design or indicate infeasibility.
Similar content being viewed by others
References
AUTOCAD Reference Manual (1988) Autodesk Inc., Sausalito, CA.
Brown, D. C. and Chandrasekaran, B. (1989)Design problem solving: knowledge structures and control strategies. San Mateo, CA: Morgan Kaufmann Publishers Inc.
CADKEY Reference Manual (1988) CADKEY Inc., Manchester, CT.
Hamm, S. J., Roseliep, R. E., Smith, L. T. and Van DeMotter, C. (1983) ‘Broaching, planing, shaping and slotting’ in Drozda, T. J. and Wick, C. (eds),Tool and Manufacturing Engineers Handbook, Volume 1, Chapter 7. New York: McGraw-Hill.
Hart, A. (1986)Knowledge acquisition for expert systems. New York: McGraw-Hill.
Linsley, H. E. (1961)Broaching: Tooling and Practice. New York: Industrial Press Inc.
MASTERCAM Reference Manual (1989) CNC Software Inc., Tolland, CT.
Savage, R. (1989), Private communication.
Schroeder, D. M. and Sears, R. A. (1988) ‘The broach making industry: current position, trends and prospects’,Survey Paper, Department of Mechanical Engineering, University of Massachusetts, May.
Van DeMotter, C. (1989) Private communication.
Walters, J. and Norman, C. R. (1988)Crafting Knowledge-Based Systems. New York: John Wiley and Sons.
XL/NC Reference Manual (1985) PMX Corporation, Livonia. MI.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Terry, W.R., Karni, R. & Richards, C.W. A knowledge based system for the integrated design and manufacture of round broach tools. J Intell Manuf 1, 77–91 (1990). https://doi.org/10.1007/BF01472505
Issue Date:
DOI: https://doi.org/10.1007/BF01472505