Abstract
Surface hardening of Ti-6Al-4V alloy with laser surface melting (LSM) in a nitrogen atmosphere has been studied. In LSM, hardness increased almost three-fold in comparison to that of the substrate, the latter having a Vickers hardness of 350, by the formation of TiN in the range of 100μm of melt depth. Hardness, then, decreased slowly and reached a minimum of 580 VHN at a maximum melt depth of 750μm. α′-Ti was formed in the heat-affected zone (HAZ) with a VHN of 450. Ageing treatments were performed for all specimens at 450 °C and different ageing times (1–20h). Short ageing treatments increased the hardness in the melted zone as well as in the HAZ (1–3h). Long ageing treatments (7–20h) resulted in uniform hardness distribution in the melted zone.
Similar content being viewed by others
References
R. L. Preece andK. W. J. Bowen,Met. Rev. 22 (1961) 241.
A. D. McQuillan andA. K. McQuillan, “Titanium” (Academic Press, New York, 1956).
B. Edenhofer,Metal Mater. Technol. 8 (1976) 421.
“Metals Handbook”, Vol. 4, 9th Edn, (ASM, Metals Park, OH) p. 213.
R. I. Jaffee, H. R. Ogden andD. J. Maykuth,Trans. AIME 188 (1950) 1261.
H. M. Gabriel, F. Schmidt, E. Broszeit andK. H. Kloss,Thin Solid Films 108 (1983) 189.
P. Siashansi,J. Metals 3 (1990) 30.
J. Zhang, X. Zhang, G. Zintang andL. Hengde,Mater. Res. Soc. Symp. Proc. 55 (1986) 30.
S. Kou, D. K. Sun andY. P. Lee,Metall. Trans. 14A (1983) 643.
S. Mandziej, M. C. Seegers andJ. Godjik,Mater. Sci. Tech. 5 (1989) 350.
J. R. Bradley andS. Kim,Script. Metall. 23 (1989) 136.
Y. W. Kim, P. R. Strutt andH. Nowotny,Metall. Trans. 10A (1979) 881.
S. Katayama, A. Matsunawa, A. Marimoto, S. Ishimoto andY. Arata, in “Laser Processing of Materials”, edited by K. Mukherjee and J. Mazumder (AIME, New York, 1985) p. 159.
J. D. Ayers, “Lasers in Metallurgy”, edited by K. Mukherjee and J. Mazumder, (AIME, New York, 1981) p. 115.
H. Michel andM. Gantois,Mém. Sci. Rev. Metall. 69 (1972) 739.
E. Metin andO. Inal,Metall. Trans. 20A (1989) 1819.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Akgun, O.V., Inal, O.T. Laser surface melting of Ti-6Al-4V alloy. J Mater Sci 27, 1404–1408 (1992). https://doi.org/10.1007/BF01142062
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01142062