Abstract
The carbon nanotube market is steadily growing and projected to reach $1.9 billion by 2010. This study examines the economics of manufacturing single-walled carbon nanotubes (SWNT) using process-based cost models developed for arc, CVD, and HiPco processes. Using assumed input parameters, manufacturing costs are calculated for 1 g SWNT for arc, CVD, and HiPco, totaling $1,906, $1,706, and $485, respectively. For each SWNT process, the synthesis and filtration steps showed the highest costs, with direct labor as a primary cost driver. Reductions in production costs are calculated for increased working hours per day and for increased synthesis reaction yield (SRY) in each process. The process-based cost models offer a means for exploring opportunities for cost reductions, and provide a structured system for comparisons among alternative SWNT manufacturing processes. Further, the models can be used to comprehensively evaluate additional scenarios on the economics of environmental, health, and safety best manufacturing practices.
Similar content being viewed by others
References
Baughman RH, Zakhidov AA et al (2002) Carbon nanotubes––the route toward applications. Science 297(5582):787–792. doi:10.1126/science.1060928
Berber S, Kwon Y-K et al (2000) Unusually high thermal conductivity of carbon nanotubes. Phys Rev Lett 84:4613. doi:10.1103/PhysRevLett.84.4613
Bronikowski MJ, Willis PA et al (2001) Gas-phase production of carbon single-walled nanotubes from carbon monoxide via the HiPco process: a parametric study, AVS. J Vac Sci Technol A 19(4):1800–1805. doi:10.1116/1.1380721
Busch J (1994) Cost modeling as a technical management tool. Res Technol Manag 37(6):50–56
Chiango DA, Isaacs JA et al (2000) Production of steel powder by rotating electrode processes: economic analyses. Int J Powder Metall 36(4):49–56
Clark JP, Field FR et al (1997) Techno-economic issues in materials selection. ASM Handb Mater Sel Des 20:255–265
Daenen M, de Fouw RD et al (2003) The wondrous world of carbon nanotubes. Eindhoven University of Technology, Eindhoven
EIA (2007) Energy Information Administration: Electricity InfoCard 2006. http://www.eia.doe.gov/bookshelf/brochures/electricityinfocard/elecinfocard2006/elecinfocard.html
Flahaut E, Peigney A et al (2000) Synthesis of single-walled carbon nanotube–Co–MgO composite powders and extraction of the nanotubes. J Mater Chem 10(2):249–252. doi:10.1039/a908593i
Global Industry Analysts I (2007). Carbon nanotubes: a Global strategic business report IV-1-IV-199
Hamada N, Sawada S-i et al (1992) New one-dimensional conductor: graphite microtubules. Phys Rev Lett 68(10):1579–1581. doi:10.1103/PhysRevLett.68.1579
Harris PJF (1999) Carbon nanotubes and related structures. Cambridge University Press, Cambridge
Healy M (2006) Environmental and economic comparison of single-wall carbon nanotube production alternatives. MS thesis, Mechanical and Industrial Engineering, Northeastern University, Boston, MA
Healy ML, Isaacs JA et al (2006) Economic and environmental tradeoffs of SWNT production. NSTI-Nanotech 2006, Boston, MA
Healy ML, Dahlben LJ et al (2008) Environmental assessment of single-walled carbon nanotube processes. J Ind Ecol 12(3):376–393. doi:10.1111/j.1530-9290.2008.00058.x
Kirchain R (2001) Cost modeling of materials and manufacturing processes. Encyclopedia of material science and engineering. E. S. Ltd, pp 1718–1727
Kociak M, Kasumov A et al (2002) Intrinsic superconductivity in ropes of carbon nanotubes. American Institute of Physics, New York, pp 237–241
Liu BC, Lyu SC et al (2004) Single-walled carbon nanotubes produced by catalytic chemical vapor deposition of acetylene over Fe–Mo/MgO catalyst. Chem Phys Lett 383(1–2):104–108. doi:10.1016/j.cplett.2003.10.134
Lux Research (2006) The nanotech report, 4th edn. Lux Research Inc., New York, NY
Nikolaev P, Bronikowski MJ et al (1999) Gas-phase catalytic growth of single-walled carbon nanotubes from carbon monoxide. Chem Phys Lett 313(1–2):91–97. doi:10.1016/S0009-2614(99)01029-5
NNI (2008) FY 2009 Budget and Highlights. National Nanotechnology Initiative
Ok ZD, Benneyan JC et al (2008) Risk analysis modeling of production costs and occupational health exposure of single-wall carbon nanotube manufacturing. J Ind Ecol 12(3):411–434. doi:10.1111/j.1530-9290.2008.00030.x
Seo JW, Couteau E et al (2003) Synthesis and manipulation of carbon nanotubes. N J Phys 5(120):1–22
Tanaka K, Yamabe T et al (1999) The science and technology of carbon nanotubes. Elsevier, Tokyo
Tang S, Zhong Z et al (2001) Controlled growth of single-walled carbon nanotubes by catalytic decomposition of CH4 over Mo/Co/MgO catalysts. Chem Phys Lett 350(1–2):19–26. doi:10.1016/S0009-2614(01)01183-6
Tanwani A (2005) Carbon nanotube production: an economic and environmental assessment of alternative technologies. MS Thesis, Mechanical and Industrial Engineering, Northeastern University, Boston, MA
Treacy MMJ, Ebbesen TW et al (1996) Exceptionally high Young’s modulus observed for individual carbon nanotubes. Nature 381(6584):678–680. doi:10.1038/381678a0
Zheng B, Li Y et al (2002) CVD synthesis and purification of single-walled carbon nanotubes on aerogel-supported catalyst. Appl Phys, A Mater Sci Process 74:345–348. doi:10.1007/s003390201275
Acknowledgments
This study was supported in part by National Science Foundation awards SES-0404114 and EEC-0425826 through the Nanoscale Science and Engineering Center for High-rate Nanomanufacturing at Northeastern University. The authors thank Zeynep Ok for discussions and her contributions to Table 1.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Isaacs, J.A., Tanwani, A., Healy, M.L. et al. Economic assessment of single-walled carbon nanotube processes. J Nanopart Res 12, 551–562 (2010). https://doi.org/10.1007/s11051-009-9673-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11051-009-9673-3