A combined approach to the modeling of fast pyrolysis of biomass particles in a fluidized bed has been used. We used models of different levels: two models of pyrolysis of a single particle — with lumped and distributed parameters — and a model of pyrolysis of an ensemble of biomass particles based on the continuum equations for the gas blown through the bed and the equations of motion for individual particles. We have determined optimal (in terms of the biofuel yield) temperatures of the process for various particle sizes of wood biomass and various values of its moisture.
Similar content being viewed by others
References
D. A. Laird, R. C. Brown, J. E. Amonette, and J. Lehmann, Review of the pyrolysis platform for coproducing bio-oil and biochar, Biofuels, Bioprod. Bioref., 3, 547–562 (2009).
D. Mohan, Ch. U. Pittman Jr., and Ph. H. Steele, Pyrolysis of wood/biomass for bio-oil: A critical review, Energy Fuels, 20, 848–889 (2006).
I. Ph. Boukis, P. Grammelis, S. Bezergianni, and A. V. Bridgwater, CFB air-blown flash pyrolysis. Part I: Engineering design and cold model performance, Fuel, 86, 1372–1386 (2007).
I. Ph. Boukis, S. Bezergianni, P. Grammelis, and A. V. Bridgwater, CFB air-blown flash pyrolysis. Part II: Operation and experimental results, Fuel, 86, 1387–1395 (2007).
J. Yanik, C. Kornmayer, M. Saglam, and M. Yuksel, Fast pyrolysis of agricultural wastes: Characterization of pyrolysis products, Fuel Process. Technol., 88, 942–947 (2007).
P. Basu and P. Kaushal, Modeling of pyrolysis and gasification in fluidized beds, Chem. Prod. Process Model., 4, Issue 1, Art. 21 (2009).
K. Papadikis, A. V. Bridgwater, and S. Gu, CFD modelling of the fast pyrolysis of biomass in fluidized bed reactors. Part A: Eulerian computation of momentum transport in bubbling fluidised beds, Chem. Eng. Sci., 63, Issue 16, 4218–4227 (2008).
K. Papadikis, S. Gu, and A. V. Bridgwater, CFD modelling of the fast pyrolysis of biomass in fluidized bed reactors. Part B: Heat, momentum, and mass transport in bubbling fluidized beds, Chem. Eng. Sci., 64, Issue 5, 1036–1045 (2009).
K. Papadikis, S. Gu, and A. V. Bridgwater, Computational modelling of the impact of particle size to the heat transfer coefficient between biomass particles and a fluidized bed, Fuel Process. Technol., 91, Issue 1, 68–79 (2010).
O. S. Rabinovich, V. V. Korban, G. I. Pal’chenok, and O. P. Khorol’skaya, Modeling of fast pyrolysis of a single biomass particle in an inert boiling bed, Inzh.-Fiz. Zh., 82, No. 4, 621–631 (2009).
R. S. Miller and J. Bellan, A generalized biomass pyrolysis model based on superimposed cellulose, hemicellulose and lignin kinetics, Combust. Sci. Technol., 126, 97–137 (1997).
Y. Tsuji, T. Kawaguchi, and T. Tanaka, Discrete particle simulation of two-dimensional fluidized bed, Powder Technol., 77, 79–87 (1993).
M. Syamlal, W. Rogers, and T. O’Brien, MFIX Documentation Theory Guide, U.S. Department of Energy (1993).
P. A. Cundall and O. D. Strack, A discrete numerical model for granular assemblies, Geotechnique, 291, 47–65 (1979).
T. B. Anderson and R. Jackson, A fluid mechanical description of fluidized beds, Industr. Eng. Chem. Fundam., 6, 527–539 (1967).
B. P. B. Hoomans, J. A. M. Kuipers, W. J. Briels, and W. P. M. V. Swaaij, Discrete particle simulation of bubble and slug formation in a two-dimensional gas-fluidized bed: a hard sphere approach, Chem. Eng. Sci., 51, No. 1, 99–118 (1996).
D. Kunii and O. Levenshpiel, Fluidization Engineering [Russian translation], Khimiya, Moscow (1976).
Author information
Authors and Affiliations
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 83, No. 4, pp. 694–704, July–August, 2010.
Rights and permissions
About this article
Cite this article
Rabinovich, O.S., Borodulya, V.A., Vinogradov, L.M. et al. Fast pyrolysis of an ensemble of biomass particles in a fluidized bed. J Eng Phys Thermophy 83, 742–752 (2010). https://doi.org/10.1007/s10891-010-0393-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-010-0393-4