References
Geisler, A. H.; Transactions AIME, Vol. 180, 1949, p. 245.
Geisler, A. H.; Phase Transformations in Solids, John Wiley & Co., New York, N. Y., 1951, p. 387
Rosenbaum, H. S., and Turnbull, D.; Acta Metallurgica, Vol. 6, 1958, p. 653.
Rosenbaum, H. S., and Turnbull, D.; Acta Metallurgica, Vol. 7, 1959, p. 664.
Thomas, G., and Nutting, J.; Journal of the Institute of Metals, Vol. 88, 1959/60, p. 81.
Kelley, A., and Nicholson, R. B.; “Precipitation Hardening”, Progress in Materials Science, Bruce Chalmers, ed.; Vol. 10, Pergamon Press, New York, N. Y., 1963.
Thomas, A. T.; private communication.
Cornish, A. J., and Day, M. K. B.; Journal of the Institute of Metals, Vol. 97, 1969, p. 44.
Unwin, P. N. T., Lorimer, G. W., and Nicholson, R. B.; “The Origin of the Grain Boundary Precipitate Free Zone”. (Preprint courtesy of the authors)
Polmear, I. J.; Journal of the Institute of Metals, Vol. 89, 1961/62, p. 193.
Taylor, J. L.; Journal of the Institute of Metals, Vol. 92, 1963/64, p. 301.
DiRusso, E.; Alumino Nuova Metallurgia, Vol. 33, 1964, p. 505.
Subramarya, B. B.; Journal of the Institute of Metals, Vol. 96, 1968, p. 288.
Nuyten, J. B. M.; Proceedings of the Fourth European Regional Conference on Electron Microscopy, Rome, 1968, p. 481.
Polmear, I. J.; Journal of Metals, Vol. 20, 1968, p. 20.
Aaron, H. B., and Aaronson, H. I.; Acta Metallurgica, Vol. 6, 1968, p. 789.
Hardy, H. K., and Heal, T. J.; The Mechanism of Phase Transportation in Metals and Alloys, The Institute of Metals, London, 1965, p. 1.
Hornbogen, E.; Zeitschrift fuer Metallkunde, Vol. 56, 1965, p. 133.
Christian, J. W.; The Theory of Transformations in Metals in Alloys, Pergamon Press, London, 1965, pp. 337, 606.
Brook, G. B.; Precipitation in Metals, Special Report No. 3, Ful-mer Research Institute, 1964.
Polmear, I. J.; Journal of the Australian Institute of Metals, Vol. 11, 1966, p. 246.
Hirth, J. P., and Pond, G. M.; “Condensation and Evaporation, Nucleation and Growth Kinetics”, Progress in Materials Science, Vol. 11, Bruce Chalmers, ed, Pergamon Press, Oxford, England, 1963.
Embury, J. D., and Nicholson, R. B.; Acta Metallurgica, Vol. 13, 1965, p. 403.
Lorimer, G. W., and Nicholson, R. B.; Acta Metallurgica, Vol. 14, 1966, p. 1009.
Lorimer, G. W., and Nicholson, R. B.; “The Nucleation of Precipitates in Aluminum Alloys”. (Preprint from the authors)
Pashley, D. W., Jacobs, M. H., and Vietz, J. T.; The Philosophical Magazme, Vol. 16, 1967, p. 51.
Jacobs, M. H, and Pashley, D. W.; “The Factors Controlling the Width of Precipitate-Free Zone at Grain Boundaries in Al-Zn,” presented at the Symposium on the Mechanism of Phase Transformations in Crystalline Solids, Manchester, England, July, 1968.
Nicholson, R. B.; Journal of the Institute of Metals, Vol. 95, 1967, p. 91.
Borelius, G., Anderson, J., and Gullberg, K.; Ing. Verenkaps Akad Handl, Vol. 10, 1943, p. 169.
Borelius. G., and Larson, L. E.; Arhin Fysih, Vol. 1956, p. 137.
Gerold, V.; Aluminium, Vol. 37, 1961, p. 583.
Doherty, P. E., and Davis, R. S.; Acta Metallurgica, Vol. 7, 1959, p. 118.
Chadwick, G. A.; The Philosophical Magazine, Vol. 14, 1966, p. 1295.
M Harris, J. E., and Masters, B. C; Proceedings of the Royal Society, Vol. A292, 1966, p. 240.
Becker, R., and Doring, W.; Ann. Physick, Vol. 24, 1935, p. 719.
Holl, H. A.; Journal of the Institute of Metals, Vol. 93, 1964/1965, p. 364.
Guinier, A.; Solid State Physics, Vol. 9, 1959, p. 294.
Gerold, V. and Schweizer, W.; Zietschrift fuer Metallkunde, Vol. 52, 1961, p. 76.
Harkness, S. D., Gould, R. W., and Hren, J. J.; The Philosophical Magazine, Vol. 19, 1969, p. 115.
Bardhan, P. and Starke, E. A.; Journal of Materials Science, Vol. 3, 1968, p. 577.
Holl, H. A.; Metal Science Journal, Vol. 1, 1967, p. 111.
Hardy, H. K.; Journal of the Institute of Metals, Vol. 80, 1951/1952, p. 483.
Chargarnier, C. and Calver, J.; Comptes Rendus, Vol. 237, 1953, p. 179.
Silcock, J. M., Heal, T. J., and Hardy, H. K.; Journal of the Institute of Metals, Vol. 84, 1955/1956, p. 23.
Polmear, I. J.; Transactions of the Metallurgical Society of AIME, Vol. 230, 1964, p. 1331.
Polmear, I. J., and Sargent, K. R.; Nature, Vol. 200, 1963, p. 669.
Vietz, J. T., Sargent, K. R., and Polmear, I. J.; Journal of the Institute of Metals, Vol. 92, 1964, p. 327.
Auld, J. H, Vietz, J. T., and Polmear, I. J.; Nature, Vol. 209, 1966, p. 703.
Wilson, R. N. and Forsyth, P. J. E.; Journal of the Institute of Metals, Vol. 94, 1966, p. 8.
Perry, A. J.; Acta Metallurgica, Vol. 14, 1966, p. 1143.
Vietz, J. T., and Polmear, I. J.; Journal of the Institute of Metals, Vol. 94, 1966, p. 410.
Elkington, R. W., and Turner, A. N.; Journal of the Institute of Metals, Vol. 95, 1967, p. 294.
Turscott, J. M., and Calvert, D. S.; Journal of the Institute of Metals, Vol. 95, 1967, p. 289.
Wilson, R. N., Moore, D. M.. and Forsyth, P. J. E.; Journal of the Institute of Metals, Vol. 95, 1967, p. 177.
Nuyten, J. B. M.; Acta Metallurgica, Vol. 15, 1967, p. 1765.
Noble, B.; Metallurgical Science Journal, Vol. 2, 1968, p. 117.
Nuyten, J. B. M.; Scripta Met. Vol. 2, 1968, p. 441.
Wilson, R. N.; Journal of the Institute of Metals, Vol. 97, 1969, p. 80.
Nuyten, J. B. M.; unpublished work.
Hornbogen, E.; Acta Metallurgica, Vol. 10, 1962, p. 525.
Polmear, I. J., and Hardy, H. K.; Journal of the Institute of Metals, Vol. 81, 1952/1953, p. 427.
Cahn, John W.; Acta Metallurgica, Vol. 5, 1957, p. 169.
Garwood, R. E., and Davies, A. L.; Journal of the Institute of Metals, Vol. 88, 1959/1960, p. 311.
Silcock, J. M.; Acta Metallurgica, Vol. 8, 1960, p. 589.
Eikum, A., and Thomas, G.; Acta Metallurgica, Vol. 12, 1964, p. 537.
Varley, P. C, Day, M. K. B., and Sendorek, A.; Journal of the Institute of Metals, Vol. 86, 1957/1958, p. 337.
Thomas, A. T.; The Institute of Metals Conference on Modem Metallography in Metallurgy, Sheffield, England, 1968.
Martin, J. W.; Precipitation Hardening, Pergamon Press, Oxford, England, 1968.
Ryum Nils, Haegland, Borge, and Lindtviet, Torlief; Zietschrift fuer Metallkunde, Vol, 58, 1967, p. 28.
Ryum, Nils; Acta Metallurgica, Vol. 16, 1968, p. 327.
Hornbogen, E.; “Diskussionsbemerkung”, Zietschrift fuer Metallkunde, Vol, 58, 1967, 69.
Gleiter, H., and Hornbogen, E.; Physica Status Solidi, Vol. 12, 1965, p. 251.
Holl, H. A.; Corrosion, Vol. 23, 1967, p. 173.
DiRusso, E.; “Further Investigations on Medium Strength Weldable Al-Zn-Mg Alloys”, Final Technical Report, Contract DA-91-591-EUC 3962, February, 1967.
DiRusso, E.; “Further Developments of the Investigations on Al-Zn-Mg Weldable Alloys”, Final Technical Report, Contract D AJA 37-67-C-OA87 Ad 676107 April, 1968.
Pugh, E. N., and Jones, W. R. D.; Metallurgia, Vol. 63, 1961, p. 3.
McEvily, A. J. Jr., and Bond, A. P.; On Film Rupture and Stress-Corrosion Cracking, Environment-Sensitive Mechanical Behavior, Gordon and Breach, New York, 1966, p. 421.
McEvily, A. J. Jr., Clark, J. B., and Bond, A. P.; Transactions ASM, Vol. 60, 1967, p. 661.
Thomas G.; Journal of the Institute of Metals, Vol. 89, 1960/1961, p. 287.
Hunter, M. S., Frank, G. R. Jr., and Robinson, D. L.; “”, Proceedings Second International Congress on Metallic Corrosion.
Brenner, P.; Aluminium, Vol. 28, 952, p. 216.
Sprowls, D. O., and Brown, R. H.; “Stress Corrosion Mechanisms for Aluminum Alloys”, International Conference on Fundamental Aspects of Stress-Corrosion Cracking, Columbus, Ohio, 1967.
Smith, W. F.; private communication.
Sedriks, A. J., Slattery, P. W., and Pugh, E. N.; Transactions ASM, Vol. 62, 1969, p. 238.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Starke, E.A. The Causes and Effects of “Denuded” or “Precipitate-Free” Zones at Grain Boundaries in Aluminum-Base Alloys. JOM 22, 54–63 (1970). https://doi.org/10.1007/BF03355628
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03355628