Abstract
The mining energy value chain starts at the face and extends to smelting and refining. System designs that conserve energy and apply energy-efficient technologies can result in significant reductions in overall energy usage. A main component of the energy value chain involves comminution, which accounts for about 50% of all energy used by mines. This chapter summarizes innovations of the state of the art with respect to energy-efficient comminution technologies and process circuit designs. The chapter will also present practices to measure and benchmark energy efficiency.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
MAC (2004) Towards sustainable mine guiding principles. http://mining.ca/towards-sustainable-mining/tsm-guiding-principles
BC Hydro (2016) Power smart. https://www.bchydro.com/powersmart/business/types-of-business-customers/mining.html
ICMM (2015) International council for mining and metals statement on climate change. http://www.icmm.com/en-gb/news/2015/icmm-issues-statement-on-climate-change. Accessed 20 July 2017
ICMM (2015) International council for mining and metals principles. http://www.icmm.com/en-gb/about-us/member-commitments/icmm-10-principles/the-principles
CEEC (2017) Coalition for energy efficient comminution. http://www.ceecthefuture.org/energy-curve-program/
MAC (2014) Energy and greenhouse gas emissions management reference. http://mining.ca/sites/default/files/documents/EnergyandGreenhouseGasEmissionsManagementReferenceGuide2014.pdf
MAC (2015) Towards sustainable mining progress report 2015. http://mining.ca/towards-sustainable-mining/tsm-progress-report-2015/energy-efficiency-aggregate-performance
Klein B, Altun NE, Scoble MJ (2015) Comminution: technology, energy efficiency and innovation. In Proceedings of 24th International Mining Congress and Exhibition of Turkey (IMCET2015), Antalya, Turkey
Wotruba H (2006) Sensor sorting technology—is the minerals industry missing a chance? In: XXIII International mineral processing congress
Bamber AS, Klein B, Pakalnis RC, Scoble MJ (2008) Integrated mining, processing and waste disposal systems for reduced energy and operating costs at Xstrata Nickel’s Sudbury Operations Institute of Materials. Min Technol 117:142–153
Klein B, Bamber AS (2017) Sensor based sorting. In: SME Mineral processing handbook
Charikinya E, Bradshaw S (2014) Use of X-ray computed tomography to investigate microwave induced cracks in sphalerite ore particles. In: International mineral processing congress
Buttress AJ, Katrib J, Jones DA, Batchelor AR, Craig DA, Royal TA, Dodds C, Kingman SW (2017) Towards large scale microwave treatment of ores: Part 1—basis of design, construction and commissioning. Miner Eng 109:169–183. doi:10.1016/j.mineng.2017.03.006
Cabri LJ, Rudashevsky NS, Rudashensky VN, Oberthür T (2008) Electric-pulse disaggregation (EPD), hydrosearation (Hs) and their use in combination for mineral processing and advanced characterization of ores. In: 40th Annual Canadian mineral processors conference, pp 211–235
Zou W, Shi F, Manlapig E (2014) The effect of metalliferous grains on electrical comminution of ore. In: International mineral processing congress
van der Wielen K, Weh A, Giese H, Käppeler J (2014) High voltage breakage: a review of theory and applications. In: International mineral processing congress
Esen S, La Rosa D, Dance A, Valery W, Jancovic A (2007) Integration and optimisation of blasting and comminution processes. In: EXPLO conference
He Q, Suorineni FT, Oh J (2016) Review of hydraulic fracturing for preconditioning in cave mining. Rock Mech Rock Eng
Amelunxen P, Mular MA, Vanderbeek J, Hill L, Herrera E (2011) The effects of ore variability on HPGR trade-off economics. In: Fifth international conference on autogenous semiautogenous grinding
Bueno M, Foggiatto B, Lane G (2015) Geometallurgy applied in comminution to minimize design risks. In: Sixth international conference on semi-autogenous high press. Grinding technology
Wills BA, Finch J (2015) Wills’ mineral processing technology: an introduction to the practical aspects of ore treatment and mineral recovery. Butterworth-Heinemann
Napier-Munn TJ, Centre JKMR (1996) Mineral comminution circuits: their operation and optimisation. Julius Kruttschnitt Mineral Research Centre
Schönert K (1979) Aspects of the physics of breakage relevant to comminution. In: Tewksbury 4th symposium on fracture. Fracture at work
Schönert K (1988) A first survey of grinding with high-compression roller mills. Int J Miner Process 22:401–412
Wang C (2013) Comparison of HPGR—ball mill and HPGR—stirred mill circuits to the existing AG/SAG mill—ball mill circuits. University of British Columbia
Wang C, Nadolski S, Mejia O, Drozdiak J, Klein B (2013) Energy and cost comparisons of HPGR based circuits with the SABC circuit installed at the Huckleberry mine. In: 45th Annual meeting Canadian mineral processors
Davaanyam Z, Klein B, Nadolski S (2015) Using piston press tests for determining optimal energy input for an HPGR operation. In: Sixth international conference on semi-autogenous high press. Grinding technology
Davaanyam Z, Klein B, Nadolski S, Kumar A (2013) A new bench scale test for determining energy requirement of an HPGR. In: Materials science and technology. Montreal, Quebec, Canada, pp 1917–1925
Davaanyam Z (2015) Piston press test procedures for predicting energy—size reduction of high pressure grinding. Doctoral dissertation, The University of British Columbia
Little WM, Mainza AN, Becker M, Gerold C, Langel J, Naik S (2015) Assessing the performance of the Vertical Roller Mill for grinding Platreef ore. In: Sixth international conference on semi-autogenous high press. Grinding technology
Nordell L (2012) Conjugate anvil-hammer mill
Nordell L, Potapov A (2015) Novel comminution machine may vastly improve crushing-grinding efficiency. In: Sixth international conference on semi-autogenous high press. Grinding technology
Genç Ö, Benzer AH (2009) Horizontal roller mill (Horomill) application versus hybrid HPGR/ball milling in finish grinding of cement. Miner Eng 22:1344–1349. doi:10.1016/j.mineng.2009.08.010
Altun D, Gerold C, Benzer H, Altun O, Aydogan N (2015) Copper ore grinding in a mobile vertical roller mill pilot plant. Int J Miner Process 136:32–36. doi:10.1016/j.minpro.2014.10.002
Cleary PW, Owen PJ (2016) Using DEM to understand scale-up for a HICOM mill. Miner Eng 92:86–109. doi:10.1016/j.mineng.2016.03.004
Kelsey CG, Kelly JR (2014) Super-fine crushing to ultra-fine size the “IMP” super-fine crusher. In: International mineral processing congress
Gao M, Weller KR, Allum P (1999) Scaling-up horizontal stirred mills from a 4-litre test mill to a 4000-litre “IsaMill.” In: Powder technology symposium
Giyani BF, Klein B, Rahal D (2017) Analysis of variables governing the operation of a vertical stirred mill. In: Conference on metallurgy 2017
Erb H, van de Vijfeijken M, Hanuman Y, Rule CM, Swart WCE, Lehto H, Keikkala V (2015) An Initial review of the metallurgical performance of the HIGmill in a primary milling application in the hard rock mining industry. In: Sixth international conference on semi-autogenous high press. Grinding technology
Parry J, Klein B, Lin D (2006) Ultrafine grinding for improved mineral liberation in regrind concentrates. Mineral Engineering Ultrafine Grinding 2006
Parry J (2006) Ultrafine grinding for improved liberation in flotation concentrate. MASc thesis, University of British Columbia
Tong L, Klein B, Zanin M, Quast K, Skinner W, Addai-Mensah J, Robinson D (2013) Stirred milling kinetics of siliceous geothitic nickel laterite for selective comminution. Miner Eng 109–115
Roufail R, Klein B (2016) Effect of mineral type on specific breakage entering in a stirred mill. In: Proceedings of XXVIII international mineral processing congress
DOE (2007) Mining industry energy bandwidth study
Dupont JF, McMullen J, Rose D (2017) The effect of choke feeding a gyratory crusher on throughput and product size. In: 49th Annual Canadian minerals processors conference
Powell MS, Weerasekara NS, Cole S, Laroche RD, Favier J (2011) DEM modelling of liner evolution and its influence on grinding rate in ball mills. Miner Eng 24:341–351. doi:10.1016/j.mineng.2010.12.012
Powell MS, Smit I, Radziszewski P, Cleary P, Rattray B (2006) Selection and design of mill liners. B Adv Comminution 331–376
Radziszewski P, Orford I, Strah L (2003) Lifter design using a DOE approach with a DEM charge motion model. In: 35th Annual meeting Canadian mineral processors, pp 527–542
Buckingham L, Dupont J-F, Stieger J, Blain B, Brits C (2011) Improving energy efficiency in Barrick grinding circuits. In: Fifth international conference on autogenous semiautogenous grinding
Giblett A, Hart S (2016) Grinding circuit practices at Newmont. 13th AusIMM Mill Oper. Conf
Atutxa I, Legarra I (2015) Stepping forward: using variable speed drives for optimizing the grinding process in SAG and ball mills. In: Sixth international conference on semi-autogenous high press. Grinding technology
Cebeci T, Klein B, Wang C, Atutxa I, Legarra I (2016) Speed is the key factor: optimizing grinding process in comminution circuits by using variable speed drives. Comminuton’16
NRCan (2005) Benchmarking the energy consumption of Canadian Open Pit Mines
NRCan (2005) Benchmarking the energy consumption of Canadian Underground Bulk Mines
Fuerstenau DW, Abouzeid A-Z (2002) The energy efficiency of ball milling in comminution. Int J Miner Process 67:161–185
Tromans D, Meech JA (2002) Fracture toughness and surface energies of covalent minerals: theoretical estimates for oxides, sulphides, silicates and halides. Miner Eng 15:1027–1041
Tromans D (2008) Mineral comminution: energy efficiency considerations. Miner Eng 21:613–620
NRCan (2014) Global energy management system implementation: case study
Ballantyne GR, Powell MS (2016) Using the comminution energy curves to assess equipment performance. Comminution’16
Doll AG (2016) An updated data set for SAG mill-power model calibration. In: Proceedings of XXVII international mineral processing congress
McIvor R (2016) The GMSG guideline for determine the bond efficiency of industrial grinding circuits. In: Proceedings of XXVIII international mineral processing congress
Levin J (1992) Indicators of grindability and grinding efficiency. J South African Inst Min Metall 92:283–290
Nadolski S, Davaanyam Z, Klein B, Zeller M, Bamber A (2013) A new method for energy benchmarking of mineral comminution. In: 23rd World mineral congress, Montreal
Nadolski S, Klein B, Kumar A, Davaanyam Z (2014) An energy benchmarking model for mineral comminution. Miner Eng 65:178–186. doi:10.1016/j.mineng.2014.05.026
Nadolski S, Klein B, Gong D, Davaanyam Z, Cooper A (2015) Development and application of an energy benchmarking model for mineral comminution. In: Sixth international conference on semi-autogenous high press. Grinding technology
Ramesh KT, Hogan JD, Kimberley J, Stickle A (2015) A review of mechanisms and models for dynamic failure, strength and fragmentation. Planet Space Sci 107:10–23
Hogan JD, Farbaniec L, Daphalapurkar N, Ramesh KT (2016) On compressive brittle fragmentation. J Am Ceram Soc 1–11
Leissner T, Duing HH, Rudolph M, Heinig T, Bachmann K, Gutzmer J, Schubert H, Peuker UA (2016) Investigation of mineral liberation by transgranular and intergranular frac-ture after milling. In: XXVII International mineral processing congress
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Klein, B., Wang, C., Nadolski, S. (2018). Energy-Efficient Comminution: Best Practices and Future Research Needs. In: Awuah-Offei, K. (eds) Energy Efficiency in the Minerals Industry. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-54199-0_11
Download citation
DOI: https://doi.org/10.1007/978-3-319-54199-0_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-54198-3
Online ISBN: 978-3-319-54199-0
eBook Packages: EnergyEnergy (R0)