Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bucknall CB (1999) Deformation mechanism in rubber-toughened polymers. In: Paul DR, Bucknall CB (eds) Polymer blends. Wiley, New York
Pearson RA, Sue HJ, Yee AF (eds) (2000) Toughening of plastics. The American Chemical Society, Washington, DC
Robeson LM (2007) Polymer blends, a comprehensive review. Hanser, Munich
Williams JG (1984) Fracture mechanics of polymers. Ellis Horwood, Chichester
Kausch HH (1987) Polymer fracture, 2nd edn. Springer, Berlin
Lohse DJ (2005) The influence of chemical structure on polyolefin melt rheology and miscibility. J Macromol Sci Part C Polym Rev 45:289–308
Yamaguchi M (2012) Polyolefin blends and miscibility. In: Nitta K, Kuriyagawa M (eds) Structure and properties of polyolefin materials, Transworld Research Network, Kerala
Carriere CJ, Silvis HC (1997) The effects of short-chain branching and comonomer type on the interfacial tension of polypropylene-polyolefin elastomer blends. J Appl Polym Sci 66:1175–1181
Phillips RA, Wolkowicz MD (2005) Polypropylene morphology. In: Pasquini N (ed) Polypropylene handbook. Hanser, Munich
Onogi S, Asada T, Tanaka A (1969) Rheo-optical studies of high polymers. XIV. Study of the deformation mechanism in polymer blends of polypropylene with ethylene-propylene rubber. J Polym Sci Part-A2 7:171–182
Read BE (1975) Ultra-violet, visible and infra-red dichroism. In: Ward IM (ed) Structure and properties of oriented polymers. Applied Science Publishers, London
Nitta K, Yamaguchi M (2007) Morphology and mechanical properties in iPP/polyolefin-based copolymer blends. In: Nwabunma D, Kyu T (eds) Polyolefin blends. Wiley, Hoboken
Bedia EL, Murakami S, Senoo K, Kohjiya S (2002) Structural development and mechanical properties on immiscible and miscible blends from isotactic polypropylene and ethylene-1-hexene copolymers under uniaxial drawing. Polymer 43:749–755
Pawlak A, Galeski A (2008) Cavitation during tensile deformation of polypropylene. Macromolecules 41:2839–2851
Michler GH, von Schmeling HK (2013) The physics and micro-mechanics of nano-voids and nano-particles in polymer combinations. Polymer 54:3131–3144
Wilkes GL, Stein RS (1975) Physicochemical approaches to the measurement of molecular anisotropy. In: Ward IM (ed) Structure and properties of oriented polymers. Applied Science Publishers, London
Michler GH (1999) Micromechanics of polymers. J Macromol Sci Phys B38:787–802
Hayashi K, Morioka T, Toki S (1993) Microdeformation mechanisms in propylene-ethylene block copolymer. J Appl Polym Sci 48:411–418
Baghri R, Pearson RA (2000) Role of particle cavitation in rubber-toughened epoxies: II. Inter-particle distance. Polymer 41:269–276
Bai SL, Wang GT, Hiver JM, G’Sell C (2004) Microstructures and mechanical properties of polypropylene/polyamide-6/polyethylene-octene elastomer blends. Polymer 45:3063–3071
G’Sell C, Bai SL, Hiver JM (2004) Polypropylene/polyamide 6/polyethylene-octene elastomer blends. Part 2: Volume dilatation during plastic deformation under uniaxial tension. Polymer 45:5785–5792
Ijichi Y, Kojima T, Suzuki Y, Nishio T, Kakugo M, Amemiya Y (1993) Synchrotron radiation small-angle X-ray scattering study on the deformation mechanisms of a toughened nylon-6/poly(phenylene ether) blend and high-impact polystyrene. Macromolecules 26:829–835
Hobbs SY (1986) The effect of rubber particle size on the impact properties of high impact polystyrene (HIPS) blends. Polym Eng Sci 26:74–81
Wu S (1990) Chain structure, phase morphology, and toughness relationships in polymers and blends. Polym Eng Sci 30:753–761
Starke JU, Godehardet R, Michler GH, Bucknall CB (1855–1860) Mechanisms of cavitation over a range of temperatures in rubber-toughened PSAN modified with three-stage core-shell particles. J Mater Sci 1997:32
Takahashi S, Okada H, Nobukawa S, Yamaguchi M (2012) Optical properties of polymer blends composed of poly(methyl methacrylate) and ethylene-vinyl acetate copolymer. Eur Polym J 48:974–980
Song JY, Kim JW, Suh KD (1999) Poly(methyl methacrylate) toughening with refractive index-controlled core–shell composite particles. J Appl Polym Sci 71:1607–1614
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer-Verlag Berlin Heidelberg
About this entry
Cite this entry
Yamaguchi, M. (2015). Mechanical Properties and Structure of Rubber-Toughened Immiscible Blends. In: Kobayashi, S., Müllen, K. (eds) Encyclopedia of Polymeric Nanomaterials. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-29648-2_93
Download citation
DOI: https://doi.org/10.1007/978-3-642-29648-2_93
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-29647-5
Online ISBN: 978-3-642-29648-2
eBook Packages: Chemistry and Materials ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics