Advertisement

Materials Balance Models

  • Gara Villalba Méndez
  • Laura Talens Peiró
Reference work entry

Abstract

This chapter presents an overview of the mass balance principle and its applications. It is an important tool for quantifying wastes which are produced by economic processes. These wastes are equal in mass to the difference between total raw material inputs to the process and useful material outputs. Products are becoming more complex which results in an increase of input mass and wastes. It is safe to say that nowadays process wastes far exceed the mass of materials that are finally embodied in useful products.

The application of the mass balance principle can take many shapes and forms, and this chapter illustrates a few. Using mass balance and chemical engineering knowledge of processes, we found that on a yearly basis, the inorganic chemical industry has a yield of 91 % (9 % of the inputs end up in waste), and the organic chemical industry has a yield of 40 %. A second example is the rare earth metal industry, where potential recovery of these scarce metals is quantified to motivate reuse and recycling. Presently less than 1 % of rare earth metals are recovered from end-of-life products, but as the demand for these resources increases in the near future for products such as electric motors and wind power turbines, recovery will become necessary.

An introduction to thermodynamics and exergy is included, since all wastes are thermodynamically degraded as compared to raw materials. The exergy of the inputs, products, and wastes is an important factor to consider for process efficiency and environmental evaluation.

Keywords

Life Cycle Assessment Wind Turbine Rare Earth Metal Liquid Crystal Display Caustic Soda 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Ayres RU, Ayres LW (1998) Accounting for resources 1: economy-wide applications of mass-balance principles to materials and waste. Edward Elgar, Cheltenham/LymeGoogle Scholar
  2. Ayres RU, Ayres LW (1999) Accounting for resources 2: the life cycle of materials. Edward Elgar, Cheltenham/LymeGoogle Scholar
  3. Ayres RU, Villalba Méndez G (2011) Materials balance models book section materials balance models. In: Batabyal AA, Nijkamp P (eds) Research tools in natural resource and environmental economics. World Scientific, Singapore, pp 403–422CrossRefGoogle Scholar
  4. Ayres RU, Talens Peiró L, Villalba Méndez G (2011) Exergy efficiency in industry: where do we stand? Environ Sci Technol 45(24):10634–10641CrossRefGoogle Scholar
  5. Bommaraju TV, Lüke B, O’Brien TF, Blackburn MC (2000) Chlorine. Book section chlorine (5 th ed): Kirk-Othmer Encyclopedia of chemical technology. Wiley & Sons, New YorkGoogle Scholar
  6. Bringezu S, Moriguchi Y (2002) Material flow analysis. Book section material flow analysis. In: Ayres RU, Ayres LW (eds) A handbook of industrial ecology. Edward Elgar, Cheltenham/Lyme, pp 79–90Google Scholar
  7. Chegwidden J, Kingsnorth D (2010) Rare earths – a golden future or overhyped? 20th industrial minerals international congress and exhibition, MiamiGoogle Scholar
  8. Cosmus T, Parizh M (2011) Advances in whole-body MRI magnets. IEEE Trans Appl Supercond 21(3):2104–2109CrossRefGoogle Scholar
  9. Davis S, Inoguchi Y (2009) Chemical economics handbook. Stanford Research Institute, Stanford, CAGoogle Scholar
  10. Estevao LR, Le Bras M, Delobel R, Nascimento RSV (2005) Spent refinery catalyst as a synergistic agent in intumescent formulations: influence of the catalyst’s particle size and constituents. Polym Degrad Stab 88(3):444–455CrossRefGoogle Scholar
  11. Graedel TE (2011) On the future availability of the energy metals. Ann Rev Mater Res 41(1):323–335CrossRefGoogle Scholar
  12. Gupta CK, Krishnamurthy N (1992) Extractive metallurgy of rare earth. Int Mater Rev 37(5):197–248Google Scholar
  13. Kingsnorth D (2009) The rare earths market: can supply meet demand in 2014? Prospectors and developers association of Canada, TorontoGoogle Scholar
  14. Mila i Canals L (2003) Contributions to LCA Methodology for agricultural systems. Institut de Ciencia i Tecnologia Ambientals ICTA. Bellaterra, Barcelona, Universitat Autonoma de Barcelona, p. 250Google Scholar
  15. Morgan JP (2010) Rare earths. We touch them everyday. Australia Corporate Access Days, New YorkGoogle Scholar
  16. Mueller J, Griese H, Hageluken M, Middendorf A, Reichl H (2003) X-free mobile electronics-strategy for sustainable development. IEEE international symposium on electronics and the environment. Vienna, pp 1318Google Scholar
  17. Niendorf HP, Haustein J, Cornelius I, Alhassan A, Clauß W (1991) Safety of gadolinium-DTPA: extended clinical experience. Magn Reson Med 22(2):222–228CrossRefGoogle Scholar
  18. Pillot C (2011) HEV, P-HEV and EC market 2010–2020. Impact on the battery business. 4th International congress on automotive battery technology, WiesbadenGoogle Scholar
  19. Schiller R (2011) Optimizing FCC operations in a High Rare Earth Cost Market: Part I, available at online journal: Refiney Operations, August 3, 2011, vol2, issue 15 pp 1-2, accessed on January 20th 2013 at http://refineryoperations.com/downloads/refinery-operations_2-15_2011-08-03.pdf
  20. Schüler D, Buchert M, Liu R, Dittrich S, Merz C, Merz C (2011) Study on rare earths and their recycling. Öko-Institet e.V, Darmstadt, p 162Google Scholar
  21. Suresh B, Fujita K (2007) Ammonia. Stanford Research InstituteGoogle Scholar
  22. Szargut J, Morris DR, Steward FR (1988) Exergy analysis of thermal, chemical, and metallurgical processes. Hemisphere Publishing Corporation, New YorkGoogle Scholar
  23. Talens Peiró L, Villalba Méndez G, Ayres RU (2013) Material flow analysis of scarce metals: sources, functions, end-uses and aspects for future supply. Environmental Science and Technology, Accepted for publication (2013)Google Scholar
  24. Van der Voet E (2002) Substance flow analysis (SFA) methodology. Book section substance flow analysis (SFA) methodology. In: Ayres RU, Ayres LW (eds) A handbook of industrial ecology. Edward Elgar, Cheltenham/Lyme, pp 91–101Google Scholar
  25. Xiaodong W, Duan W (2004) Development of auto exhaust catalysts and associated application of rare earth in China. J Rare Earths 22(6):837–843Google Scholar
  26. Xiaoning W, Zhen Z, Chunming X, Aijun D, Li Z, Guiyuan J (2007) Effects of light rare earth on acidity and catalytic performance of HZSM-5 zeolite for catalytic clacking of butane to light olefins. J Rare Earths 25(3):321–328CrossRefGoogle Scholar
  27. Xu T, Peng H (2009) Formation cause, composition analysis and comprehensive utilization of rare earth solid wastes. J Rare Earths 27(6):1096–1102CrossRefGoogle Scholar
  28. Yang H, Wang H, Yu H, Xi J, Cui R, Chen G (2003) Status of photovoltaic industry in China. Energy Policy 31(8):703–707CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2014

Authors and Affiliations

  1. 1.Universitat Autònoma de BarcelonaBellaterraSpain
  2. 2.Social Innovation CentreINSEADFontainebleauFrance

Personalised recommendations