Abstract
A number of physical properties are relevant and important for characterizing adhesives, providing insights into the underlying behavior of the base polymer(s) as well as the effects that fillers, additives, and other factors may play in the liquid adhesive and bonded joints that may result. Characterizing these adhesive properties, interpreting the results, and interpreting the implications provides information that is vital assuring quality control, improving bond performance, assessing the relative merits of adhesive options for a given application, and understanding the polymer more completely. This chapter addresses several relevant physical properties of adhesives, including viscosity, density, and stress–strain behavior, quantities that are often thought to be intrinsic properties of a material. Methods of characterizing these properties are discussed, along with insights for interpreting these quantities and their implications for polymeric adhesive systems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ASTM-D1084-08 (2008) Standard test methods for viscosity of adhesives. ASTM, West Conshohoken
ASTM-D1337-96 (2001) Storage life of adhesives by consistency and bond strength. ASTM, West Conshohocken
ASTM-D1338-99 (2001) Working life of liquid or paste adhesives by consistency and bond strength. ASTM, West Conshohocken
ASTM-D1505-03 (2003) Standard test method for density of plastics by the density-gradient technique. ASTM, West Conshohocken
ASTM-D1875-03 (2003) Standard test method for density of adhesives in fluid form. ASTM, West Conshohocken
ASTM-D2556-93a (2001) Standard test method for adhesives having shear-rate-dependent flow properties. ASTM, West Conshohocken
ASTM-D3236 (2001) Standard test method for apparent viscosity of hot-melt adhesives and coating materials. ASTM, West Conshohocken
ASTM-D4499-95 (2001) Standard test method for heat stability of hot-melt adhesives. ASTM, West Conshohocken
ASTM-D6226 (2005) Standard test method for open cell content of rigid cellular plastics. ASTM, West Conshohocken
Berker A (2002) Rheology for adhesion science and technology. In: Dillard DA, Pocius AV (eds) Adhesion science and engineering - I: the mechanics of adhesion. Elsevier, Amsterdam, pp 443–498
Bird RB, Armstrong RC, Hassager L (1987) Dynamics of polymeric liquids: fluid mechanics, vol 1, 2nd edn. Wiley, New York
Brinson HF, Brinson CL (2007) Polymer engineering science and viscoelasticity: an introduction. Springer, Berlin
Christensen RM (1982) Theory of viscoelasticity: an introduction, 2nd edn. Academic, New York
Chu TC, Ranson WF, Sutton MA, Peters WH (1985) Applications of digital-image-correlation techniques to experimental mechanics. Exp Mech 25 (Copyright 1986, IEE): 232–244
Dowling N (2007) Mechanical behavior of materials. Pearson Prentice Hall, Upper Saddle River
Ferry JD (1980) Viscoelastic properties of polymers, 3rd edn. Wiley, New York
Gibson LJ, Ashby MF (1999) Cellular solids: structure and properties. Cambridge University Press, Cambridge
Goodwin JW, Hughes RW (2000) Rheology for chemists: an introduction. Royal Society of Chemistry, Cambridge
Han CD (2007) Rheology and processing of polymeric materials: Volume I: polymer rheology, vol I. Oxford University Press, Oxford
ISO-1183-1:2004 (2004) Plastics – Methods for determining the density of non-cellular plastics – Part 1: Immersion method, liquid pyknometer method and titration method. International Standards Organization, Geneva
Kholodovych V, Welsh WJ (2007) Densities of amorphous and crystalline polymers. In: Mark JE (ed) Physical properties of polymers handbook. Springer, New York
Knauss WG, Emri I (1987) Volume change and the nonlinearly thermoviscoelastic constitution of polymers. Polym Eng Sci 27(1):86–100
Kovacs A (1964) Glass transition in amorphous polymers: a phenomenological study. Adv Polym Sci 3:394–507
Larson RD (1988) Constitutive equations for polymer melts and solutions. Butterworth, Stoneham
Macosko CW (1994) Rheology: principles, measurements and applications. Wiley, New York
Mark JE (ed) (2007) Physical properties of polymers handbook. Springer, New York
Matsuoka S (1992) Relaxation phenomena in polymers. Hanser, Munich
Orwoll RA (2007) Densities, coefficients of thermal expansion, and compressibilities of amorphous polymers. In: Mark JE (ed) Physical properties of polymers handbook. Springer, New York
Shaw MT, MacKnight WJ (2005) Introduction to polymer viscoelasticity, 3rd edn. Wiley, Hoboken
Struik LCE (1978) Physical aging in amorphous polymers and other materials. Elsevier Scientific, Amsterdam
van Krevelen DW (1997) Physical properties of polymers: their correlation with chemical structure: their numerical estimation and prediction from additive group contributions, 3rd edn. Elsevier, Amsterdam
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this entry
Cite this entry
Dillard, D.A. (2011). Physical Properties of Adhesives. In: da Silva, L.F.M., Ă–chsner, A., Adams, R.D. (eds) Handbook of Adhesion Technology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-01169-6_17
Download citation
DOI: https://doi.org/10.1007/978-3-642-01169-6_17
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-01168-9
Online ISBN: 978-3-642-01169-6
eBook Packages: EngineeringReference Module Computer Science and Engineering