Abstract
Normal human gait is one of the most complex functions of the human body. Kinematics is the study of the motion of points, bodies, and systems of bodies without consideration of the causes of motion. Motion or movement can mean physical translation of either a person or a segment of a person through space. Kinetics is the study of forces acting on mechanisms. Together, kinematics and kinetics can be used to study human gait. Kinematic and kinetic quantification of subject specific variables can be effectively used in prevention, early diagnosis, intervention, and quantifying relevant outcomes. This chapter will focus on the techniques used for quantifying such variables and the mechanical models available for gait analysis.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Baker R, Finney L, Orr J (1999) A new approach to determine the hip rotation from clinical gait analysis data. Hum Mov Sci 18:655–667
Bell AL, Pedersen DR, Brand RA (1990) A comparison of the accuracy of several hip Center location Prediction methods. J Biomech 23:617–621
Cappozzo A (1984) Gait analysis methodology. Hum Mov Sci. https://doi.org/10.1016/0167-9457(84)90004-6
Collins TD, Ghoussayni SN, Ewins DJ, Kent JA (2009) A six degrees-of-freedom marker set for gait analysis: repeatability and comparison with a modified Helen Hayes set. Gait Posture 30:173–180. https://doi.org/10.1016/j.gaitpost.2009.04.004
Davis R, Ounpuu S, Tyburski D, Gage J (1991) A gait analysis data collection and reduction technique. Hum Mov Sci 10:575–587
Duffell LD, Hope N, McGregor AH (2014) Comparison of kinematic and kinetic parameters calculated using a cluster-based model and Vicon’s plug-in gait. Proc Inst Mech Eng part H. J Eng Med 228:206–210. https://doi.org/10.1177/0954411913518747
Ehrig RM, Heller MO, Kratzenstein S et al (2011) The SCoRE residual: a quality index to assess the accuracy of joint estimations. J Biomech. https://doi.org/10.1016/j.jbiomech.2010.12.009
Ehrig RM, Taylor WR, Duda GN, Heller MO (2006) A survey of formal methods for determining the centre of rotation of ball joints. J Biomech. https://doi.org/10.1016/j.jbiomech.2005.10.002
Gamage SSHU, Lasenby J (2002) New least squares solutions for estimating the average centre of rotation and the axis of rotation. J Biomech. https://doi.org/10.1016/S0021-9290(01)00160-9
Halvorsen K (2003) Bias compensated least squares estimate of the center of rotation. J Biomech. https://doi.org/10.1016/S0021-9290(03)00070-8
Hanavan EP (1964) A mathematical model of the human body. AMRL-TR-64-102. Aerospace 1–149
Harrington ME, Zavatsky AB, Lawson SEM et al (2007) Prediction of the hip joint centre in adults, children, and patients with cerebral palsy based on magnetic resonance imaging. J Biomech 40:595–602. https://doi.org/10.1016/j.jbiomech.2006.02.003
Kadaba MP, Ramakrishnan HK, Wootten ME (1990) Measurement of lower extremity kinematics during level walking. J Orthop Res 8:383–392. https://doi.org/10.1007/978-1-4471-5451-8_100
Leardini A, Cappozzo A, Catani F et al (1999) Validation of a functional method for the estimation of hip joint centre location. J Biomech 32:99–103. https://doi.org/10.1016/S0021-9290(98)00148-1
Piazza SJ, Erdemir A, Okita N, Cavanagh PR (2004) Assessment of the functional method of hip joint center location subject to reduced range of hip motion. J Biomech. https://doi.org/10.1016/S0021-9290(03)00288-4
Piazza SJ, Okita N, Cavanagh PR (2001) Accuracy of the functional method of hip joint center location: effects of limited motion and varied implementation. J Biomech 34:967–973
Poole D (2015) Linear algebra: a modern introduction, 4th edn. Cengage Learning, Stamford
Sangeux M, Peters A, Baker R (2011) Hip joint centre localization: evaluation on normal subjects in the context of gait analysis. Gait Posture 34:324–328. https://doi.org/10.1016/j.gaitpost.2011.05.019
Schache AG, Baker R, Lamoreux LW (2006) Defining the knee joint flexion-extension axis for purposes of quantitative gait analysis: an evaluation of methods. Gait Posture. https://doi.org/10.1016/j.gaitpost.2005.08.002
Schwartz MH, Rozumalski A (2005) A new method for estimating joint parameters from motion data. J Biomech. https://doi.org/10.1016/j.jbiomech.2004.03.009
Siston RA, Delp SL (2006) Evaluation of a new algorithm to determine the hip joint center. J Biomech. https://doi.org/10.1016/j.jbiomech.2004.10.032
Spoor CW, Veldpaus FE (1980) Rigid body motion calculated from spatial co-ordinates of markers. J Biomech. https://doi.org/10.1016/0021-9290(80)90020-2
Sutherland DH (2002) The evolution of clinical gait analysis part II kinematics. Gait Posture 16:159–179
Upadhyaya S, Lee W-S (2013) Survey of formal methods of hip joint center calculation in human studies. APCBEE Procedia. https://doi.org/10.1016/j.apcbee.2013.08.007
Whitsett C (1962) Some dynamic response characteristics of weightless man. Wright Patterson Air Force Base, Ohio
Woltring HJ, Huiskes R, De Lange A (1985) Finite centroid and helical Axis estimation from noisy landmark measurements in the study of human joint kinematics. J Biomech 18:379–389
Zatsiorsky V, Seluyanov V (1983) The mass and inertia characteristics of the main segments of the human body. In: Biomechanics VIII, 8th edn, pp 1152–1159
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this entry
Cite this entry
Nicholson, K. (2020). Kinematics and Kinetics: Technique and Mechanical Models. In: Miller, F., Bachrach, S., Lennon, N., O'Neil, M.E. (eds) Cerebral Palsy. Springer, Cham. https://doi.org/10.1007/978-3-319-74558-9_98
Download citation
DOI: https://doi.org/10.1007/978-3-319-74558-9_98
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-74557-2
Online ISBN: 978-3-319-74558-9
eBook Packages: MedicineReference Module Medicine