Abstract
This chapter reviews a variety of methods of surface characterization that have been found to be useful in the study of adhesion. The methods considered can be conveniently classified in three groups: those that provide information regarding surface topography (scanning electron microscopy and atomic force microscopy [AFM]); those that probe the surface-free energy of a material (measurement of contact angles and inverse gas chromatography, in addition to simple test methods such as the water break test and dyne inks); and those that provide a surface-specific chemical analysis (X-ray photoelectron spectroscopy, Auger electron spectroscopy, and time-of-flight secondary ion mass spectrometry). All provide surface-specific information and this is essential for adhesion investigations as the forces responsible for adhesion operate over very short length scales and for any analysis to be meaningful the analysis technique must probe depths of a similar order of magnitude. These methods are used in all types of adhesion investigations, which, in general, can be considered in one of three areas of endeavor. The analysis of the unbonded surface and the relationship of surface characteristics to performance such as strength or durability, the forensic analysis of failed joints with a view to defining the exact locus of failure and any interfacial phenomena that may have exacerbated failure, fundamental studies of adhesion carried out with a view to gaining a fuller understanding of the interfacial chemistry of adhesion.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abel M-L, Watts JF (2005a) Inverse gas chromatography. In: Packham DE (ed) Handbook of adhesion. Wiley, Chichester, pp 252–254
Abel M-L, Watts JF (2005b) Inverse gas chromatography and acid-base interactions. In: Packham DE (ed) Handbook of adhesion. Wiley, Chichester, pp 255–257
ASTM (2002) F 22–02 Standard test method for hydrophobic surface films by the water break test. ASTM, West Conshohocken
Baer DR, Lea AS, Cazaux J, Geller JD, Hammond JS, Kover L, Powell CJ, Seah MP, Suziki M, Wolstenholme J, Watts JF (2010) J Elec Spec 176:80–94
Binnig G, Rohrer H, Gerber C, Weidel E (1982) Phys Rev Lett 49:57
Briggs D, Grant JT (2003) Surface analysis by Auger and x-ray photoelectron spectroscopy. IM Publications and Surface Spectra, Chichester
Briggs D, Vickerman JC (2001) ToF-SIMS: surface analysis by mass spectrometry. IM Publications and Surface Spectra, Chichester
Brighton Technologies Group Inc (2010) http://www.btgnow.com/SEP.html
BSI (2010) British Standard 1134:2010, Assessment of surface texture. Guidance and general information
Castle JE (2008) J Adhes 84:368
Castle JE, Zhdan PA (1997) J Phys D Appl Phys 30:722
Chehimi MM, Abel M-L, Watts JF, Digby RP (2001) J Mater Chem 11:533
Choi JW (2003) The plasma treatment of poly(dimethylsiloxane) for enhanced surface properties. PhD thesis, University of Surrey
Dillingham RG, Oakley BG, Renieri M, Salah L (2010) From bond gap thickness effects to geometric transferability of fracture parameters in structural adhesives. In: Proceedings 33rd annual meeting of the adhesion society inc, Daytona Beach, 21–24 Feb 2010, pp 217–219
Goodhew PJ, Humphreys J, Beanland R (2001) Electron microscopy and analysis, 3rd edn. Taylor & Francis, London
Lee JLS, Gilmore IS (2009) The application of multivariate data analysis techniques in surface analysis. In: Vickerman JC, Gilmore IS (eds) Surface analysis: the principal techniques. Wiley, Chichester, pp 563–612
Packham DE (2005) Surface energy components. In: Packham DE (ed) Handbook of adhesion. Wiley, Chichester, pp 517–520
Surface and Interface Analysis (2009a) Special issues on multivariate analysis 41(Pt 1):75–142; (2009b) 41(Pt II): 633–703
Surface Measurement Systems (2010). http://www.thesorptionsolution.com/Products_IGC.php
Taylor AM, Abel M-L, Watts JF, Chehimi MM (1995) Int J Adhes Adhes 15:3
Venables JA (1984) J Mater Sci 19:2431
Vickerman JC, Gilmore IS (2009) Surface analysis: the principal techniques. Wiley, Chichester
Watts JF (1988) Surf Interface Anal 12:497
Watts JF (2009) Adhesion science and technology. In: Riviere JC, Myhra S (eds) Handbook of surface and interface analysis: methods for problem solving. CRC Press, Boca Raton, pp 5651–5656
Watts JF (2010) Role of corrosion in the failure of adhesive joints. In: Richardson JA et al (eds) Shreir’s corrosion, vol 3. Elsevier, Amsterdam, pp 2463–2481
Watts JF, Wolstenholme J (2003) An introduction to surface analysis by electron spectroscopy. Wiley, Chichester
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this entry
Cite this entry
Watts, J.F. (2018). Surface Characterization and Its Role in Adhesion Science and Technology. In: da Silva, L., Öchsner, A., Adams, R. (eds) Handbook of Adhesion Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-55411-2_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-55411-2_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-55410-5
Online ISBN: 978-3-319-55411-2
eBook Packages: EngineeringReference Module Computer Science and Engineering