Advertisement

Bio-Inspired Materials: Contribution of Biology to Energy Efficiency of Buildings

  • Marzieh Imani
  • Michael Donn
  • Zahra Balador
Living reference work entry

Abstract

This chapter systematically analyzes the existing literature on bio-inspired materials used in architecture, construction, and building design. Imitating nature accounts for an effective strategy for designing innovative buildings. Integrating this biomimicry strategy into the design process generates benefits for both designers and the natural environment, as bio-inspired designs can contribute to sustainability. Mimicking nature, various biomimetic approaches have produced environmentally friendly, innovative, smart, or intelligent materials for buildings. This literature review demonstrates that researchers and designers are significantly inspired by animals’, plants’, or microorganisms’ innovative biological systems (functions, structures, and processes) in order to design bio-inspired materials for increasing energy efficiency of the buildings. However, the range of innovative bio-inspired materials is not broad, and most of the published research seems to be about one-off cases. The chapter first introduces the systematic literature research methodology used for analyzing the current knowledge of architectural bio-inspired materials. Current research on bio-inspired materials used in architectural and building science is reviewed, and a new classification scheme for clustering relevant data is presented. These innovative materials serve different functions in buildings. This classification scheme enables a new synthesis of existing knowledge based on the multi-functionality of currently developed bio-inspired building. The chapter concludes by substantiating the argument that “there is no systematic and general workflow for data mining innovative building design/construction concepts from biological processes.” Overall, then, this research suggests that there is a need for a bio-architectural workflow assisting scientists and designers to find the relevant organisms in nature as the source of inspiration for innovative design.

References

  1. 1.
    Wahl DC (2006) Bionics vs. biomimicry: from control of nature to sustainable participation in nature. Paper presented at the Design and nature III: comparing design in nature with science and engineering, Vol 8. WIT Press, Southampton, pp 289–298Google Scholar
  2. 2.
    Papanek V (1974) Design for the real world: human ecology and social change. Paladin, St AlbansGoogle Scholar
  3. 3.
    Vogel S (1998) Cats’ paws and catapults: mechanical worlds of nature and people/Steven Vogel illustrated by Kathryn K. Davis with the author, 1st edn. Norton, New YorkGoogle Scholar
  4. 4.
    Pele M, Cimpeanu C (2012) Biotechnology: an introduction. WIT Press, BostonGoogle Scholar
  5. 5.
    Benyus JM (1997) Biomimicry: innovation inspired by nature, 1st edn. Morrow, New YorkGoogle Scholar
  6. 6.
    Badarnah Kadri L (2012) Towards the LIVING envelope: biomimetics for building envelope adaptation. In: Architectural engineering + technology. TU Delft, Delft University of Technology. Zutphen, The NetherlandsGoogle Scholar
  7. 7.
    Gamage A, Hyde R (2012) A model based on biomimicry to enhance ecologically sustainable design. Archit Sci Rev 55(3):224–235CrossRefGoogle Scholar
  8. 8.
    Mazzoleni I (2013) In: Price S (ed) Architecture follows nature: biomimetic principles for innovative design/Ilaria Mazzoleni in collaboration with Shauna Price. CRC Press, Taylor & Francis Group, Boca RatonGoogle Scholar
  9. 9.
    Pawlyn M (2011) Biomimicry in architecture. Riba Publishing, LondonGoogle Scholar
  10. 10.
    Zari MP (2010) Biomimetic design for climate change adaptation and mitigation. Archit Sci Rev 53(2):172–183CrossRefGoogle Scholar
  11. 11.
    Peters S (2011) In: ProQuest (ed) Material revolution: sustainable multi-purpose materials for design and architecture. Springer, Basel/LondonGoogle Scholar
  12. 12.
    Abderrazak El A et al (2010) Large colonial organisms with coordinated growth in oxygenated environments 2.1 Gyr ago. Nature 466(7302):100CrossRefGoogle Scholar
  13. 13.
    Gruber P et al (2011) Biomimetics: materials, structures and processes: examples, ideas and case studies. Springer Berlin Heidelberg, Berlin/HeidelbergCrossRefGoogle Scholar
  14. 14.
    Evans J, Benefield P (2001) Systematic reviews of educational research: does the medical model fit? British Educational Research Journal 27(5):527–541Google Scholar
  15. 15.
    Blessinger K, Olle M (2004) Content analysis of the leading general academic databases. Libr Collect Acquis Tech Serv 28(3):335–346CrossRefGoogle Scholar
  16. 16.
    Lombard M, Jones MT (2007) Identifying the (tele)presence literature. Psychnol J 5(2):197–206Google Scholar
  17. 17.
    Chadegani A et al (2013) A comparison between two main academic literature collections: Web of Science and Scopus databases. Asian Soc Sci 9(5):18–26CrossRefGoogle Scholar
  18. 18.
    Gasparyan AY, Kitas GD, Ayvazyan L (2013) Multidisciplinary bibliographic databases. J Korean Med Sci 28(9):1270–1275CrossRefGoogle Scholar
  19. 19.
    Chen X (2010) Google Scholar’s dramatic coverage improvement five years after debut 1 1 The author is grateful to Alice Chen of Duke University for editing this paper. Ser Rev 36(4):221–226Google Scholar
  20. 20.
    Walters WH (2007) Google Scholar coverage of a multidisciplinary field. Inf Process Manag 43(4):1121–1132CrossRefGoogle Scholar
  21. 21.
    Imhof B, Gruber PE (2015) Built to grow – blending architecture and biology. Birkhäuser, BaselGoogle Scholar
  22. 22.
    Gorb SN, Gorb EV (2016) Insect-inspired architecture: insects and other arthropods as a source for creative design in architecture. In: Knippers J, Nickel KG, Speck T (eds) Biomimetic research for architecture and building construction: biological design and integrative structures. Springer Berlin Heidelberg, New York, pp 57–83CrossRefGoogle Scholar
  23. 23.
    Oxman N (2010) Structuring materiality: design fabrication of heterogeneous materials. Archit Des 80(4):78–85Google Scholar
  24. 24.
    Oxman N (2011) Variable property rapid prototyping: inspired by nature, where form is characterized by heterogeneous compositions. Virtual Phys Prototyping 6(1):3–31CrossRefGoogle Scholar
  25. 25.
    Xing Y et al (2017) Exploring design principles of biological and living building envelopes: what can we learn from plant cell walls? Intell Build Int, pp 1–25.  https://doi.org/10.1080/17508975.2017.1394808
  26. 26.
    Memmott P, Hyde R, O’Rourke T (2009) Biomimetic theory and building technology: use of Aboriginal and scientific knowledge of spinifex grass. Archit Sci Rev 52(2):117–125CrossRefGoogle Scholar
  27. 27.
    Oxman N et al (2013) Biological Computation for Digital Design and Fabrication. Paper presented at the Computation & Performance: Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Delft, The NetherlandsGoogle Scholar
  28. 28.
    Altun DA, Örgülü B (2014) Towards a different architecture in cooperation with nanotechnology and genetic science: new approaches for the present and the future. Archit Res 4(1B):1–12Google Scholar
  29. 29.
    Hu M (2016) Performance driven structural design biomimicry in architecture. In: 105th ACSA annual meeting, at DetroitGoogle Scholar
  30. 30.
    Amziane S, Collet F (2017) Bio-aggregates based building materials: state-of-the-art report of the RILEM Technical Committee 236-BBM. Springer Netherlands, DordrechtCrossRefGoogle Scholar
  31. 31.
    Montana-Hoyos C, Fiorentino C (2016) Bio-utilization, bio-inspiration, and bio-affiliation in design for sustainability: biotechnology, biomimicry, and biophilic design. Int J Design Object 10(3):1CrossRefGoogle Scholar
  32. 32.
    Mekonnen T et al (2013) Progress in bio-based plastics and plasticizing modifications. J Mater Chem 1(43):13379CrossRefGoogle Scholar
  33. 33.
    Boussetoua H et al (2017) Mechanical and hygrothermal characterisation of cork concrete composite: experimental and modelling study. Eur J Environ Civ Eng 1:1–16CrossRefGoogle Scholar
  34. 34.
    Asha AB, Sharif A, Hoque ME (2017) Interface interaction of jute fiber reinforced PLA biocomposites for potential applications. In: Green biocomposites. Springer, Cham, pp 285–307Google Scholar
  35. 35.
    Aït Oumeziane Y et al (2017) Influence of hysteresis on the transient hygrothermal response of a hemp concrete wall. J Build Perform Simul 10(3):256–271CrossRefGoogle Scholar
  36. 36.
    Vukusic P, Sambles JR (2003) Photonic structures in biology. Nature 424(6950):852CrossRefGoogle Scholar
  37. 37.
    Klang K et al (2017) Plants and animals as source of inspiration for energy dissipation in load bearing systems and facades. In: Biomimetic research for architecture and building construction, biologically-inspired systems. Springer, ChamGoogle Scholar
  38. 38.
    Lienhard J et al (2011) Flectofin: a hingeless flapping mechanism inspired by nature. Bioinspir Biomim 6(4):045001CrossRefGoogle Scholar
  39. 39.
    Lienhard J et al (2009) Abstraction of plant movements for deployable structures in architecture. Paper presented at the In Proc. of the 6th Plant Biomechanics Conf. Cayenne, French Guyana, FrancGoogle Scholar
  40. 40.
    Poppinga S et al (2010) Plant movements as concept generators for deployable systems in architecture. In: A Carpi, CA Brebbia (Eds.) Design and Nature V. Wit Press, pp 403–409Google Scholar
  41. 41.
    Ota T, Enoki S (2010) Material design of a biomimetic composite material used for a wooden building joint structure. WIT Trans Ecol Environ 138:329–338CrossRefGoogle Scholar
  42. 42.
    Kolednik O et al (2011) Bioinspired design criteria for damage-resistant materials with periodically varying microstructure. Adv Funct Mater 21(19):3634–3641CrossRefGoogle Scholar
  43. 43.
    Trask RS, Bond IP (2010) Bioinspired engineering study of Plantae vascules for self-healing composite structures. J R Soc Interface 7(47):921–931CrossRefGoogle Scholar
  44. 44.
    Honey KT, Pagani GA (2013) Bio inspired energy: biomimicry innovations for energy sustainability. In: Complex systems summer school proceedings. Santa Fe Institute, Santa FeGoogle Scholar
  45. 45.
    Tao P et al (2015) Bioinspired engineering of thermal materials. Adv Mater 27(3):428–463MathSciNetCrossRefGoogle Scholar
  46. 46.
    Zhang W et al (2009) Novel photoanode structure templated from butterfly wing scales. Chem Mater 21(1):33–40CrossRefGoogle Scholar
  47. 47.
    Zhang C, McAdams DA, Grunlan JC (2016) Nano/micro-manufacturing of bioinspired materials: a review of methods to mimic natural structures. Adv Mater 28(30):6292–6321CrossRefGoogle Scholar
  48. 48.
    Liu X et al (2010) Replication of butterfly wing in TiO2 with ordered mesopores assembled inside for light harvesting. Mater Lett 64(24):2745–2747CrossRefGoogle Scholar
  49. 49.
    Chen J et al (2012) Bioinspired Au/TiO2 photocatalyst derived from butterfly wing (Papilio Paris). J Colloid Interface Sci 370(1):117–123CrossRefGoogle Scholar
  50. 50.
    Zhou H, Fan T, Zhang D (2011) Biotemplated Materials for Sustainable Energy and Environment: Current Status and Challenges. ChemSusChem, 4(10):1344–1387 Google Scholar
  51. 51.
    Stegmaier T, Linke M, Planck H (2009) Bionics in textiles: flexible and translucent thermal insulations for solar thermal applications. Philos Trans R Soc A Math Phys Eng Sci 367(1894):1749–1758CrossRefGoogle Scholar
  52. 52.
    Jia H et al (2017) Design and optimization of a photo-thermal energy conversion model based on polar bear hair. Sol Energy Mater Sol Cells 159:345–351CrossRefGoogle Scholar
  53. 53.
    Wang T et al (2013) Synthesis and thermal conductivities of the biomorphic Al2O3 fibers derived from silk template. Int J Appl Ceram Technol 10(2):285–292CrossRefGoogle Scholar
  54. 54.
    Vanaga R, Blumberga A (2015) First steps to develop biomimicry ideas. Energy Procedia 72:307–309CrossRefGoogle Scholar
  55. 55.
    Han ZW et al (2016) Antireflective surface inspired from biology: a review. Biosurf Biotribol 2(4):137–150CrossRefGoogle Scholar
  56. 56.
    Han Y, Taylor JE, Pisello AL (2015) Toward mitigating urban heat island effects: investigating the thermal-energy impact of bio-inspired retro-reflective building envelopes in dense urban settings. Energy Build 102:380–389CrossRefGoogle Scholar
  57. 57.
    Alston M (2015) Natures buildings as trees: biologically inspired glass as an energy system. Opt Photon J 5(136):136–150CrossRefGoogle Scholar
  58. 58.
    Shaikh PH et al (2014) A review on optimized control systems for building energy and comfort management of smart sustainable buildings. Renew Sustain Energy Rev 34:409–429CrossRefGoogle Scholar
  59. 59.
    Reyssat E, Mahadevan L (2009) Hygromorphs: from pine cones to biomimetic bilayers. J R Soc Interface 6(39):951–957CrossRefGoogle Scholar
  60. 60.
    Randall ME et al (2013) Self-shaping composites with programmable bioinspired microstructures. Nat Commun 4:1712CrossRefGoogle Scholar
  61. 61.
    Holstov A, Bridgens B, Farmer G (2015) Hygromorphic materials for sustainable responsive architecture. Constr Build Mater 98:570–582CrossRefGoogle Scholar
  62. 62.
    Jayaguru C (2016) Health monitoring of concrete specimens using smart aggregates. i-Manag J Struct Eng 5(3):25–32Google Scholar
  63. 63.
    Lim YY, Soh CK (2014) Electro-mechanical impedance (EMI)-based incipient crack monitoring and critical crack identification of beam structures. Res Nondestruct Eval 25(2):82–98CrossRefGoogle Scholar
  64. 64.
    Loh K J, Ryu D, Lee B M (2015) Bio-inspired sensors for structural health monitoring. In: F Pacheco Torgal et al (eds) Biotechnologies and Biomimetics for Civil Engineering. Springer International Publishing, Switzerland, pp 255–274Google Scholar
  65. 65.
    Knippers J, Nickel KG, Speck T (2016) Biomimetic research for architecture and building construction: biological design and integrative structures, vol 8. Springer, ChamGoogle Scholar
  66. 66.
    Eurich L, Schott R, Wagner A, Roth-Nebelsick A (2016) Fundamentals of heat and mass transport in frost-resistant plant tissues. In: Knippers J, Nickel KG, Speck T (eds) Biomimetic research for architecture and building construction: biological design and integrative structures. Springer Berlin Heidelberg, New YorkGoogle Scholar
  67. 67.
    Betz O et al (2016) Adaptive stiffness and joint-free kinematics: actively actuated rod-shaped structures in plants and animals and their biomimetic potential in architecture and engineering. In: Biomimetic research for architecture and building construction. Springer, Cham, pp 135–167Google Scholar
  68. 68.
    Chen S-Y, Chiu M-L (2007) Designing smart skins for adaptive environments: a fuzzy logic approach to smart house design. Comput Aided Des Appl 4(6):751–760CrossRefGoogle Scholar
  69. 69.
    Maragkoudaki A (2013) No-Mech Kinetic Responsive Architecture: Kinetic Responsive Architecture with No Mechanical Parts. 9th International Conference on Intelligent Environments (IE). IEEE, Athens, GreeceGoogle Scholar
  70. 70.
    Le Duigou A et al (2017) Natural fibres actuators for smart bio-inspired hygromorph biocomposites. Smart Mater Struct 26(12):125009CrossRefGoogle Scholar
  71. 71.
    Reichert S, Menges A, Correa D (2015) Meteorosensitive architecture: biomimetic building skins based on materially embedded and hygroscopically enabled responsiveness. Comput Aided Des 60:50–69CrossRefGoogle Scholar
  72. 72.
    Berardi U (2010) Dielectric electroactive polymer applications in buildings. Intell Build Int 2(3):167–178Google Scholar
  73. 73.
    Sung D (2016) Smart geometries for smart materials: taming thermobimetals to behave. J Archit Educ 70(1):96–106CrossRefGoogle Scholar
  74. 74.
    Lopez M et al (2015) Active materials for adaptive architectural envelopes based on plant adaptation principles. J Facade Des Eng 3:27CrossRefGoogle Scholar
  75. 75.
    Gebeshuber I et al (2010) Bacilli, green algae, diatoms and red blood cells-how nanobiotechnological research inspires architecture Bio-Inspired Nanomaterials and Nanotechnology. Nova Science Publishers, pp 207–244  Google Scholar
  76. 76.
    Nessim MA (2015) Biomimetic architecture as a new approach for energy efficient buildings through smart building materials. J Green Build 10(4):73–86CrossRefGoogle Scholar
  77. 77.
    Gil-Lopez T, Gimenez-Molina C (2013) Influence of double glazing with a circulating water chamber on the thermal energy savings in buildings. Energy Build 56:56–65CrossRefGoogle Scholar
  78. 78.
    Carbonari A et al (2012) Experimental estimation of the solar properties of a switchable liquid shading system for glazed facades. Energy & Buildings 45(299–310)Google Scholar
  79. 79.
    Xu YL, He J (2017) Smart civil structures. CRC Press, Boca RatonCrossRefGoogle Scholar
  80. 80.
    Carolyn D (1994) Matrix cracking repair and filling using active and passive modes for smart timed release of chemicals from fibers into cement matrices. Smart Mater Struct 3(2):118–123CrossRefGoogle Scholar
  81. 81.
    Zhang Y (2003) The concept and development of smart structures technologies for long-span cable-supported bridges. Mar Georesour Geotechnol 21(3–4):315–331CrossRefGoogle Scholar
  82. 82.
    Seifan M, Samani A, Berenjian A (2016) Bioconcrete: next generation of self-healing concrete. Appl Microbiol Biotechnol 100(6):2591–2602CrossRefGoogle Scholar
  83. 83.
    Kumar VR et al (2011) An overview of techniques based on biomimetics for sustainable development of concrete. Curr Sci 101(6):741–747Google Scholar
  84. 84.
    Han B, Zhang L, Ou J (2017) Future developments and challenges of smart and multifunctional concrete. In: Smart and multifunctional concrete toward sustainable infrastructures. Springer, Singapore, pp 391–400CrossRefGoogle Scholar
  85. 85.
    Nosonovsky M, Rohatgi PK (2011) Thermodynamic principles of self-healing metallic materials. In: Biomimetics in materials science. Springer, New York, pp 25–51CrossRefGoogle Scholar
  86. 86.
    Seo J, Kyoung-Hwan K (2017) Analytical investigation of the cyclic behavior of smart recentering T-stub components with superelastic SMA bolts. Metals 7(10):386CrossRefGoogle Scholar
  87. 87.
    Braconi A, Morelli F, Salvatore W (2012) Development, design and experimental validation of a steel self-centering device (SSCD) for seismic protection of buildings. Bull Earthq Eng 10(6):1915–1941CrossRefGoogle Scholar
  88. 88.
    Kaluvan S, Park C-Y, Choi S-B (2016) Bio-inspired device: a novel smart MR spring featuring tendril structure. Smart Mater Struct 25(1):01LT01CrossRefGoogle Scholar
  89. 89.
    Ripley R L, Bhushan B (2016) Bioarchitecture: bioinspired art and architecture–a perspective. Philosophical transactions. Series A, Mathematical, physical, and engineering sciences 374(2073):20160192Google Scholar
  90. 90.
    Hensel M (2006) (Synthetic) life architectures: ramifications and potentials of a literal biological paradigm for architectural design. Archit Des 76(2):18–25MathSciNetGoogle Scholar
  91. 91.
    Armstrong R (2014) Designing with protocells: applications of a novel technical platform. Life 4(3):457–490CrossRefGoogle Scholar
  92. 92.
    Goreau TJ (2012) Marine electrolysis for building materials and environmental restoration. In: Electrolysis. INTECH, Rijeka, CroatiaGoogle Scholar
  93. 93.
    Deplazes A, Huppenbauer M (2009) Synthetic organisms and living machines. Syst Synth Biol 3(1):55–63CrossRefGoogle Scholar
  94. 94.
    Reap J, Baumeister D, Bras B (2005) Holism, biomimicry and sustainable engineering. In ASME 2005 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, pp 423–431Google Scholar
  95. 95.
    Martín-Palma R J, Lakhtakia A (2013) Engineered biomimicry for harvesting solar energy: a bird's eye view. International Journal of Smart and Nano Materials, 4(2):83–90Google Scholar

Copyright information

© Springer International Publishing AG 2018

Authors and Affiliations

  1. 1.School of Architecture and DesignVictoria University of WellingtonWellingtonNew Zealand

Personalised recommendations