Abstract
Adhesives are used today with increasing volumes in many applications in different industries and are supplied to the end customers in various forms. Very common are liquid adhesives, pastes, mastics, as well as adhesive films or tapes. Less common are powder systems for coating purposes. Adhesives are used where more conventional mechanical or thermal joining technologies can’t be used because the joint area is not accessible (e.g., for a spot welding or riveting gun), entire areas need to be bonded (tile or carpet bonding), or if improved mechanical joint performance is required. Improved mechanical performance could be increased joint stiffness, longtime durability, or corrosion resistance under environmental exposure.
Bonding with adhesives is not a simple operation, and a lot of preparation work is necessary before the adhesive can be applied to the designated bonding area (Shields J, Adhesives handbook. Butterworths, London, 1985). A chain of preparation processes is required. It starts with the mixing of the adhesive and its storage before the transfer to the customer. At the customer, the adhesives need to be transferred to the operation area. The substrates to which the adhesive will be applied have to be well prepared. The final process step includes the dispensing of the adhesive to the substrate and the joining of the parts which are intended to be bonded. Some adhesive formulations require an accurate metering of different components. Some, sensitive adhesive operations require a monitoring of the application, e.g., by vision systems, to guarantee the correctness of the application. Each of the steps is important and contributes equally to the quality of the final adhesive application. See below the summary of the different process preparation steps:
-
1.
Adhesive mixing at the supplier
-
2.
Packaging of the adhesive at the supplier
-
3.
Adhesive storage at the supplier or the customer
-
4.
Transferring the adhesive from the storage to the application area
-
5.
Substrate preparation
-
6.
Metering and dispensing the adhesive
-
7.
Quality control
Depending for which application, in which industry, and by which end customers adhesives are used, different application techniques and dispensing and metering devices are chosen.
For smaller bonding operations like sealing work at construction sites, repair work at car garages, or to fix tiles to a floor, adhesives are typically manually applied out of smaller containers like cartridges. If adhesives are used in a larger scale, like at an automotive line, for example, for metal bonding reasons or to bond windows to the frame of a car, a robot application is used, which pumps the adhesive out of drums and transfers it to a dozer and a gun for the final application. The adhesive itself can be applied in different ways like as a simple bead, sprayed, extruded, or by air assistance, called swirling. Which technique is used depends on factors like the application, the rheological property of the adhesive, and the application temperature. Therefore, the rheological properties of the adhesive formulation need to be tailored to the application. Lower viscous adhesives can be applied by spraying or extrusion beside the simple bead application. Higher viscous adhesives are often limited to bead application, or the application temperature needs to be significantly increased to be applicable by other methods.
This chapter will discuss in further detail each item of the process chain: the storage of adhesives, the transfer to the application area, the different metering and dispensing technologies, the used mixing equipments, the substrate preparation, and the quality control. Proposals are made regarding people education and how to create a safe working environment.
Keywords
- Education
- Preventive measures
- Vacuum mixing
- Continuous process
- Batch process
- Vertical mixing
- Horizontal mixing
- Kneader
- Agitators
- Speed mixer
- Adhesive storage
- Packaging
- Single-component dispensing
- Two-part dispensing
- Material transfer
- Application equipment
- Heat flow
- Dozer
- Gun
- Application technologies
- Substrate preparation
- Steel treatment
- Aluminum treatment
- Low-energy surfaces
- Plasma treatment
- Quality control
- Vision systems
References
Alhofen B (2005) Get into the thick things. www.chemicalprocessing.com
Angos C (2007) Vacuum mixing. www.processingmagazine.com
Bienak D (2009) Preparing polymeric substrates for bonding. www.reinforcedplastics.com
Dettner HW (1991) Pocket dictionary for metal surface treatment. Leuze Verlag, D-7968 Saulgau
Gehmecker H (1994) Chrome free pre-treatment of magnesium parts. In: 51st world conference on magnesium
Habenicht G (1990) Kleben. Springer-Verlag Berlin Heidelberg
Houwink R (1967) Adhesion and Adhesives, Elsevier Science & Technology, Oxford, United Kingdom
Korane KJ (2000) Guidelines for bonding plastics, machine design. http://www.machinedesign.com/adhesives/guidelines-bonding-plastics
Lees WA (1997) Adhesives in engineering design. Springer GmbH, Berlin
Lutz A (2009) Crash-resistant two-component adhesives for repairs, adhesion adhesives & sealants. Adhäsion Kleben & Dichten, Springer Fachmedien Wiesbaden
Lutz A, Brändli C (2010) Optimal haftend, temperaturstabil und länger lagerfähig, adhesion adhesives & sealants. Adhäsion Kleben & Dichten, Springer Fachmedien Wiesbaden
Metals handbook (1982) 9th edn, vol 5, Surface cleaning, finishing and coating, ASM
National Research Council (1976) Structural adhesives with emphasis on aerospace applications. Dekker. Adhesion and Adhesives, Elsevier Science & Technology, Oxford, United Kingdom
Satriana J (1974) Hot melt adhesives: manufacture and applications. Noyes Data Corporation. Adhesion and Adhesives, Elsevier Science & Technology, Oxford, United Kingdom
Skar JI Albright D (2002) Emerging trends in corrosion protection of magnesium die castings. Magnesium Technology., Springer, Cham pp. 585–591
Symietz D, Lutz A (2007) Structural bonding in automotive manufacturing. Verlag moderne Industrie Verlag Moderne Industrie, Die Bibliothek der Technik, D-80992, Munich, Germany
Symietz D, Lutz A (5/2008) Strukturkleben von hochfestem Stahl, leightweightdesign. Vieweg+Teubner Verlag, Germany
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this entry
Cite this entry
Lutz, A. (2017). Preparation for Bonding. In: da Silva, L., Ă–chsner, A., Adams, R. (eds) Handbook of Adhesion Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-42087-5_37-2
Download citation
DOI: https://doi.org/10.1007/978-3-319-42087-5_37-2
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-42087-5
Online ISBN: 978-3-319-42087-5
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering