Advertisement

Strain Gradient Plasticity: Deformation Patterning, Localization, and Fracture

  • Giovanni Lancioni
  • Tuncay Yalçinkaya
Living reference work entry

Abstract

In this chapter, two different strain gradient plasticity models based on non-convex plastic energies are presented and compared through analytical estimates and numerical experiments. The models are formulated in the simple one-dimensional setting, and their ability to reproduce heterogeneous plastic strain processes is analyzed, focusing on strain localization phenomena observed in metallic materials at different length scales. In a geometrically linear context, both models are based on the additive decomposition of the strain into elastic and plastic parts. Moreover, they share the same non-convex plastic energy, and they are both characterized by the same nonlocal plastic energy as well, i.e., a quadratic form of the plastic strain gradient. In the first model, proposed in Yalçinkaya et al. (Int J Solids Struct 49:2625–2636, 2012) and Yalcinkaya (Microstructure evolution in crystal plasticity: strain path effects and dislocation slip patterning. Ph.D. thesis, Eindhoven University of Technology, 2011), the plastic energy is assumed to be conservative, and plastic dissipation is introduced through a viscous term, which makes the formulation rate-dependent. In the second model, developed in Del Piero et al. (J Mech Mater Struct 8(2–4):109–151, 2013), the plastic term is supposed to be totally dissipative. As a result, plastic deformations are not recoverable, and the resulting framework is rate-independent, contrary to the first model. First, the evolution problems resulting from the two theories are analytically solved in a special simplified case, and correlations between the shape of the plastic potential and the modeling predictions are established. Then, the models are numerically implemented by finite elements, and numerical solutions of two different one-dimensional problems, associated with different plastic energies, are determined. In the first problem, a double-well plastic energy is considered, and the evolution of plastic slip patterning observed in crystals at the mesoscale is reproduced. In the second problem, a convex-concave plastic energy is used to simulate the macroscopic response of a tensile steel bar, which experiences the so-called necking process, with plastic strains localization and final coalescing into fracture. Numerical results provided by the two models are analyzed and compared.

Keywords

Strain gradient plasticity Size effect Localization Deformation patterning Damage Fracture 

References

  1. E.C. Aifantis, On the microstructural origin of certain inelastic models. J. Eng. Mater. Technol. 106, 326–330 (1984)CrossRefGoogle Scholar
  2. C.J. Bayley, W.A.M. Brekelmans, M.G.D. Geers, A comparison of dislocation induced back stress formulations in strain gradient crystal plasticity. Int. J. Solids Struct. 43, 7268–7286 (2006)CrossRefGoogle Scholar
  3. Z.P. Bazant, M. Jirásek, Nonlocal integral formulations of plasticity and damage: survey of progress. J. Eng. Mech. 128, 1119–1149 (2002)CrossRefGoogle Scholar
  4. G. Del Piero, A variational approach to fracture and other inelastic phenomena. J. Elast. 112(1), 3–77 (2013)MathSciNetCrossRefGoogle Scholar
  5. G. Del Piero, G. Lancioni, R. March, A diffuse cohesive energy approach to fracture and plasticity: the one-dimensional case. J. Mech. Mater. Struct. 8(2–4), 109–151 (2013)CrossRefGoogle Scholar
  6. P. Gudmundson, A unified treatment of strain gradient plasticity. J. Mech. Phys. Solids 52, 1379–1406 (2004)MathSciNetCrossRefGoogle Scholar
  7. M. Gurtin, L. Anand, Thermodynamics applied to gradient theories involving the accumulated plastic strain: the theories of Aifantis and Fleck & Hutchinson and their generalization. J. Mech. Phys. Solids 57, 405–421 (2009)CrossRefGoogle Scholar
  8. M.E. Gurtin, E. Fried, L. Anand, The Mechanics and Thermodinamics of Continua (Cambridge University Press, New York, 2010)CrossRefGoogle Scholar
  9. D. Hull, Orientation and temperature dependence of plastic deformation processes in 3⋅25 percent silicon iron. Proc. R. Soc. A 274, 5–24 (1963)CrossRefGoogle Scholar
  10. M. Jirásek, S. Rolshoven, Localization properties of strain-softening gradient plasticity models. Part II. Theories with gradients of internal variables. Int. J. Solids Struct. 46, 2239–2254 (2009)MATHGoogle Scholar
  11. B. Klusemann, T. Yalçinkaya, Plastic deformation induced microstructure evolution through gradient enhanced crystal plasticity based on a non-convex Helmholtz energy. Int. J. Plast. 48, 168–188 (2013)CrossRefGoogle Scholar
  12. B. Klusemann, T. Yalçinkaya, M.G.D. Geers, B. Svendsen, Application of non-convex rate dependent gradient plasticity to the modeling and simulation of inelastic microstructure development and inhomogeneous material behavior. Comput. Mater. Sci. 80, 51–60 (2013)CrossRefGoogle Scholar
  13. G. Lancioni, Modeling the response of tensile steel bars by means of incremental energy minimization. J. Elast. 121, 25–54 (2015)MathSciNetCrossRefGoogle Scholar
  14. G. Lancioni, T. Yalcinkaya, A. Cocks, Energy based non-local plasticity models for deformation patterning, localization and fracture. Proc. R. Soc. A 471, 20150275:1–20150275:23 (2015a)Google Scholar
  15. G. Lancioni, G. Zitti, T. Yalcinkaya, Rate-independent deformation patterning in crystal plasticity. Key Eng. Mater. 651–653, 944–949 (2015b)CrossRefGoogle Scholar
  16. A. Mielke, A mathematical framework for generalized standard materials in the rate-independent case, in Multifield Problems in Solid and Fluid Mechanics, ed. by R. Helmig, A. Mielke, B. Wohlmuth. Lecture Notes in Applied and Computational Mechanics, vol. 28 (Springer, Berlin/Heidelberg, 2006), pp. 399–428Google Scholar
  17. T. Yalçinkaya, Microstructure evolution in crystal plasticity: strain path effects and dislocation slip patterning. Ph.D. thesis, Eindhoven University of Technology (2011)Google Scholar
  18. T. Yalçinkaya, G. Lancioni, Energy-based modeling of localization and necking in plasticity. Procedia Mater. Sci. 3, 1618–1625 (2014)CrossRefGoogle Scholar
  19. T. Yalçinkaya, W.A.M. Brekelmans, M.G.D. Geers, Deformation patterning driven by rate dependent nonconvex strain gradient plasticity. J. Mech. Phys. Solids 59, 1–17 (2011)MathSciNetCrossRefGoogle Scholar
  20. T. Yalçinkaya, W.A.M. Brekelmans, M.G.D. Geers, Non-convex rate dependent strain gradient crystal plasticity and deformation patterning. Int. J. Solids Struct. 49, 2625–2636 (2012)CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Dipartimento di Ingegneria CivileEdile e Architettura, Università Politecnica delle MarcheAnconaItaly
  2. 2.Department of Aerospace EngineeringMiddle East Technical UniversityAnkaraTurkey
  3. 3.Aerospace Engineering ProgramMiddle East Technical University Northern Cyprus CampusGuzelyurtTurkey

Personalised recommendations