Abstract
Ongoing rapid development in many places worldwide raises concerns about negative CO2 emissions. An effort was made by building industries to reduce CO2 emissions by producing less clinker-based modified cement. In the construction industry, this type of cement provides adequate strength and durability. Various nanoparticles embedded in cement, on the other hand, have sparked huge interest in civil engineering as a means of achieving sustainability goals. Additionally, important yet hidden effects of various nanomaterials whether it be strength, durability, and workability of the suggested enhanced concretes/mortar were investigated. Even at very low concentrations (less than 0.08% by weight of cement), most carbon-based nanoreinforcers exhibit considerable improvements in flexural and compressive strength (up to 100%) and durability (up to 80% greater acid resistance). A denser cement matrix is the result of chemical, rather than physical, interactions between nanomaterials and C-S-H paste (C-S-H). This chapter presents a detailed overview of many widely utilized carbon nanomaterials used in cementitious composites. It discusses the common weight percentages employed in mixes by numerous researchers in the field and evaluates the mechanical characteristics of these nanomaterials when applied.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Abbreviations
- AFM:
-
Atomic force microscopy
- Aft:
-
Ettringite
- Bwoc:
-
By weight of cement
- CDs:
-
Carbon dots
- CH:
-
Calcium hydroxide
- CHM:
-
Cement hybrid material
- CNCs:
-
Cementitious nanocomposites
- CNDs:
-
Carbon nanodiamonds
- CNFs:
-
Carbon nanofibers
- CNHs:
-
Carbon nanohorns
- CNMs:
-
Carbon-based nanomaterials
- CNTs:
-
Carbon nanotubes
- C-S-H:
-
Calcium-silicate-hydrate
- CVD:
-
Chemical vapor deposition
- FCNCs:
-
Fly ash blended cementitious nanocomposites
- FCNT-FCMs:
-
Functionalized carbon nanotubes-fly ash blended cement mortars
- FT-IR:
-
Fourier transform infrared
- GNPs:
-
Graphite nanoplatelets
- GO:
-
Graphene oxide
- GO-FCMs:
-
Graphene oxide-fly ash blended cement mortars
- GON:
-
Graphene oxide nanoplatelets
- GONPs:
-
Graphene oxide nanoplatelets
- MLG:
-
Multilayer graphene
- MWCNTs:
-
Multiwalled carbon nanotubes
- OPC:
-
Ordinary Portland cement
- rGO:
-
Reduced graphene oxide
- SEM:
-
Scanning electron microscopy
- SWCNTs:
-
Single-walled carbon nanotubes
References
Abu Al-Rub RK, Tyson BM, Yazdanbakhsh A, Grasley Z (2012) Mechanical properties of nanocomposite cement incorporating surface-treated and untreated carbon nanotubes and carbon nanofibers. J Nanomech Micromech 2:1–6. https://doi.org/10.1061/(ASCE)NM.2153-5477.0000041
Acquah SF, Penkova AV, Markelov DA, Semisalova AS, Leonhardt BE, Magi JM (2017) The beautiful molecule: 30 years of C60 and its derivatives. ECS J Solid State Sci Technol 6:M3155. https://doi.org/10.1149/2.0271706jss
Alkhateb H, Al-Ostaz A, Cheng AHD, Li X (2013) Materials genome for graphene-cement nanocomposites. J Nanomechanics Micromech 3:67–77. https://doi.org/10.1061/(ASCE)NM.2153-5477.0000055
Balapour M, Ramezanianpour A, Hajibandeh E (2017) An investigation on mechanical and durability properties of mortars containing nano and micro RHA. Constr Build Mater 132:470–477. https://doi.org/10.1016/j.conbuildmat.2016.12.017
Chatterjee S, Chen A (2012) Functionalization of carbon buckypaper for the sensitive determination of hydrogen peroxide in human urine. Biosens Bioelectron 35:302–307. https://doi.org/10.1016/j.bios.2012.03.005
Chen Z, Zhou X, Wang X, Guo P (2018) Mechanical behavior of multilayer GO carbon-fiber cement composites. Constr Build Mater 159:205–212. https://doi.org/10.1016/j.conbuildmat.2017.10.094
Gajanan K, Tijare SN (2018) Applications of nanomaterials. Mater Today: Proc 5:1093–1096. https://doi.org/10.1016/j.matpr.2017.11.187
Gao Y, Jing HW, Chen SJ, Du MR, Chen WQ, Duan WH (2018) Influence of ultrasonication on the dispersion and enhancing effect of graphene oxide–carbon nanotube hybrid nanoreinforcement in cementitious composite. Compos Part B Eng 164:45–53. https://doi.org/10.1016/j.compositesb.2018.11.066
Geim AK, Novoselov KS (2010) The rise of graphene. Nat Mater 6:11–19. https://doi.org/10.1142/9789814287005_0002
Gholampour A, Kiamahalleh MV, Tran DN, Ozbakkaloglu T, Losic D (2017) Revealing the dependence of the physiochemical and mechanical properties of cement composites on graphene oxide concentration. RSC Adv 7:55148–55156. https://doi.org/10.1039/C7RA10066C
Gong K, Pan Z, Korayem AH, Qiu L, Li D, Collins F et al (2015) Reinforcing effects of graphene oxide on Portland cement paste. J Mater Civ Eng 27:A4014010. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001125
Hassan MM, Dylla H, Mohammad LN, Rupnow T (2010) Evaluation of the durability of titanium dioxide photocatalyst coating for concrete pavement. Constr Build Mater 24:1456–1146. https://doi.org/10.1016/j.conbuildmat.2010.01.009
Helmuth R (1987) Fly ash in cement and concrete (No. SP040. 01T)
Hogancamp J, Grasley Z (2017) The use of microfine cement to enhance the efficacy of carbon nanofibers with respect to drying shrinkage crack resistance of Portland cement mortar. Cem Concr Compos 83:405–414. https://doi.org/10.1016/j.cemconcomp.2017.08.006
Hummers WS Jr, Offeman RE (1958) Preparation of graphitic oxide. J Am Chem Soc 80:1339. https://doi.org/10.1021/ja01539a017
Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354:56–58. https://doi.org/10.1038/354056a0
Kaur R, Kothiyal NC (2019a) Positive synergistic effect of superplasticizer stabilized graphene oxide and functionalized carbon nanotubes as a 3-D hybrid reinforcing phase on the mechanical properties and pore structure refinement of cement nanocomposites. Constr Build Mater 222:358–370. https://doi.org/10.1016/j.conbuildmat.2019.06.152
Kaur R, Kothiyal NC (2019b) Comparative effects of sterically stabilized functionalized carbon nanotubes and graphene oxide as reinforcing agent on physico-mechanical properties and electrical resistivity of cement nanocomposites. Constr Build Mater 202:121–138. https://doi.org/10.1016/j.conbuildmat.2018.12.220
Kaur R, Kothiyal NC (2021) Synergic influence of fly ash and graphene oxide-carbon nanotubes hybrid on mechanical, microstructural and porosity properties of cement mortars. J Adhes Sci Technol 35:1777–1805. https://doi.org/10.1080/01694243.2020.1860548
Kaur R, Kothiyal NC, Singh J (2020) Ultrasonic and superplasticizer assisted dispersion of hybrid carbon nanomaterials (FCNT and GO): its effect on early stage hydration and physico-mechanical strength of cement mortar. J Adhes Sci Technol 34:192–218. https://doi.org/10.1080/01694243.2019.1664214
Konsta-Gdoutos MS, Metaxa ZS, Shah SP (2010) Highly dispersed carbon nanotube reinforced cement based materials. Cem Concr Res 40:1052–1059. https://doi.org/10.1016/j.cemconres.2010.02.015
Kosmatka SH, Panarese WC, & Kerkhoff B (2002) Design and control of concrete mixtures. IL: Portland Cement Association 5420:60077–1083
Kroto HW, Heath JR, O’Brien SC, Curl RF, Smalley RE (1987) Astrophys J 314:352. https://doi.org/10.1038/318162a0
Kuilla T, Bhadra S, Yao D, Kim NH, Bose S, Lee JH (2010) Recent advances in graphene based polymer composites. Prog Polym Sci 35:50–1375. https://doi.org/10.1016/j.progpolymsci.2010.07.005
Kumar V (1998) Protection of steel reinforcement for concrete-a review. Corros Rev Corros Rev 16:317–358. https://doi.org/10.1515/CORRREV.1998.16.4.317
Le JL, Du H, Dai Pang S (2014) Use of 2D graphene nanoplatelets (GNP) in cement composites for structural health evaluation. Compos Part B Eng 67:555–563. https://doi.org/10.1016/j.compositesb.2014.08.005
Lee C, Wei X, Kysar JW, Hone J (2008) Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 321:385–388. https://doi.org/10.1126/science.1157996
Li H, Zhang MH, Ou JP (2006) Abrasion resistance of concrete containing nano-particles for pavement. Wear 260:1262–1266. https://doi.org/10.1016/j.wear.2005.08.006
Li X, Liu YM, Li WG, Li CY, Sanjayan JG, Duan WH, Li Z (2017) Effects of graphene oxide agglomerates on workability, hydration, microstructure and compressive strength of cement paste. Constr Build Mater 145:402–410. https://doi.org/10.1016/j.conbuildmat.2017.04.058
Liu J, Fu J, Yang Y, Gu C (2019) Study on dispersion, mechanical and microstructure properties of cement paste incorporating graphene sheets. Constr Build Mater 199:1–11. https://doi.org/10.1016/j.conbuildmat.2018.12.006
Lu D, Zhong J (2022) Carbon-based nanomaterials engineered cement composites: a review. JIPR 3:1–20. https://doi.org/10.1186/s43065-021-00045-y
Lu D, Shi X, Zhong J (2022) Understanding the role of unzipped carbon nanotubes in cement pastes. Cem Concr Compos 126:104366. https://doi.org/10.1016/j.cemconcomp.2021.104366
Lv S, Ma Y, Qiu C, Zhou Q (2013a) Regulation of GO on cement hydration crystals and its toughening effect. Mag Concr Res 65:1246–1254. https://doi.org/10.1680/macr.13.00190
Lv S, Ma Y, Qiu C, Sun T, Zhou LJ (2013b) Effect of graphene oxide nanosheets of microstructure and mechanical properties of cement composites. Constr Build Mater 49:121–127. https://doi.org/10.1016/j.conbuildmat.2013.08.022
Lv S, Liu J, Sun T, Ma Y, Zhou Q, (2014) Effect of GO nanosheets on shapes of cement hydration crystals and their formation process, Constr Build Mater 64:231–239.10.1016/j.conbuildmat.2014.04.061
Metaxa ZS, Konsta-Gdoutos MS, Shah SP (2009) Carbon nanotubes reinforced concrete. ACI Spec Publ 267:11–20
Metaxa ZS, Konsta-Gdoutos MS, Shah SP (2010) Carbon nanofiber–reinforced cement-based materials. Transp Res Rec 2142:114–118. https://doi.org/10.3141/2142-17
Metaxa ZS, Tolkou AK, Efstathiou S, Rahdar A, Favvas EP, Mitropoulos AC, Kyzas GZ (2021) Nanomaterials in cementitious composites: an update. Molecules 26:1430. https://doi.org/10.1016/j.conbuildmat.2010.07.009
Mohsen MO, Taha R, Taqa AA, Shaat A (2017) Optimum carbon nanotubes’ content for improving flexural and compressive strength of cement paste. Constr Build Mater 150:395–403. https://doi.org/10.1016/j.conbuildmat.2017.06.020
Nochaiya T, Chaipanich (2011) A behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials. Appl Surf Sci 257:1941–1945. https://doi.org/10.1016/j.apsusc.2010.09.030
Norhasri MM, Hamidah MS, Fadzil AM (2017) Applications of using nano material in concrete: a review. Constr Build Mater 133:91–97
Novoselov KS, Geim AK, Morozov SV, Jiang DE, Zhang Y, Dubonos SV, Grigorieva IV, Firsov AA (2004) Electric field effect in atomically thin carbon films. Science 306:666–669. https://doi.org/10.1126/science.1102896
Novoselov KS, Geim AK, Morozov SV, Jiang D, Katsnelson MI, Grigorieva IV, Dubonos SV, Firsov A (2005) Two-dimensional gas of massless Dirac fermions in graphene. Nature 438:197–200. https://doi.org/10.1038/nature04233
Pacheco-Torgal F, Jalali S (2011) Nanotechnology: advantages and drawbacks in the field of construction and building materials. Constr Build Mater 25:582–590. https://doi.org/10.1016/j.conbuildmat.2010.07.009
Paul SC, Van Rooyen AS, van Zijl GP, Petrik LF (2018) Properties of cement-based composites using nanoparticles: a comprehensive review. Constr Build Mater 189:1019–1034. https://doi.org/10.1016/j.conbuildmat.2018.09.062
Paulchamy G, Arthi L, Lignesh BD (2015) A simple approach to stepwise synthesis of graphene oxide. Nanomed Nanotechnol 6:11–14. https://doi.org/10.4172/2157-7439.1000253
Peng H, Ge Y, Cai CS, Zhang Y, Liu Z (2019) Mechanical properties and microstructure of graphene oxide cement-based composites. Constr Build Mater 194:102–109. https://doi.org/10.1016/j.conbuildmat.2018.10.234
Potts JR, Dreyer DR, Bielawski CW, Ruoff RS (2011) Graphene-based polymer nanocomposites. Polymer 52:5–25. https://doi.org/10.1016/j.polymer.2010.11.042
Qureshi TS, Panesar DK (2019) Impact of graphene oxide and highly reduced graphene oxide on cement based composites. Constr Build Mater 206:71–83. https://doi.org/10.1016/j.conbuildmat.2019.01.176
Rehman SKU, Ibrahim Z, Memon SA, Javed MF, Khushnood RA (2017) A sustainable graphene based cement composite. Sustainability 9:1229. https://doi.org/10.3390/su9071229
Ruan Y, Zhang W, Wang J, Wang D, Yu X, Han B (2019) Nanocarbon material-filled cementitious composites for construction applications. In: Nanocarbon and its composites. Woodhead Publishing, pp 781–803. https://doi.org/10.1016/B978-0-08-102509-3.00026-2
Saafi M, Tang L, Fung J, Rahman M, Liggat J (2015) Enhanced properties of graphene/fly ash geopolymeric composite cement. Cem Concr Res 67:292–299. https://doi.org/10.1016/j.cemconres.2014.08.011
Said AM, Zeidan MS, Bassuoni MT, Tian Y (2012) Properties of concrete incorporating nano-silica. Constr Build Mater 36:838–844. https://doi.org/10.1016/j.conbuildmat.2012.06.044
Sanchez F, Ince C (2009) Microstructure and macroscopic properties of hybrid carbon nanofiber/silica fume cement composites. Compos Sci Technol 69:1310–1318. https://doi.org/10.1016/j.compscitech.2009.03.006
Sanchez F, Sobolev K (2010) Nanotechnology in concrete – a review. Constr Build Mater 24:2060–2071. https://doi.org/10.1016/j.conbuildmat.2010.03.014
Sedaghat A, Ram MK, Zayed A, Kamal R, Shanahan N (2014) Investigation of physical properties of graphene-cement composite for structural applications. Open J Compos Mater 4:2014. https://doi.org/10.4236/ojcm.2014.41002
Shamsaei E, de Souza FB, Yao X, Benhelal E, Akbari A, Duan W (2018) Graphene-based nanosheets for stronger and more durable concrete: a review. Constr Build Mater 183:642–660. https://doi.org/10.1016/j.conbuildmat.2018.06.201
Sharma S, Kothiyal NC (2015) Influence of graphene oxide as dispersed phase in cement mortar matrix in defining the crystal patterns of cement hydrates and its effect on mechanical, microstructural and crystallization properties. RSC Adv 5:52642–52657. https://doi.org/10.1039/C5RA08078A
Sharma S, Susan D, Kothiyal NC, Kaur R (2018) Graphene oxide prepared from mechanically milled graphite: effect on strength of novel fly-ash based cementitious matrix. Constr Build Mater 177:10–22. https://doi.org/10.1016/j.conbuildmat.2018.05.051
Sun S, Ding S, Han B, Dong S, Yu X, Zhou D (2017) Multi-layer graphene-engineered cementitious composites with multifunctionality/intelligence. Compos Part B 129:221–232. https://doi.org/10.1016/j.compositesb.2017.07.063
Tung VC, Allen MJ, Yang Y, Kaner RB (2008) High-throughput solution processing of large-scale graphene. Nat Nanotechnol 4:25–29. https://doi.org/10.1038/nnano.2008.329
Wanekaya AK (2011) Applications of nanoscale carbon-based materials in heavy metal sensing and detection. Analyst 136:4383–4391. https://doi.org/10.1039/c1an15574a
Wang Q, Wang J, Lu CX, Liu BW, Zhang K, Li CZ (2015) Influence of graphene oxide additions on the microstructure and mechanical strength of cement. New Carbon Mater 30:349–356. https://doi.org/10.1016/S1872-5805(15)60194-9
Wang B, Jiang R, Wu Z (2016a) Investigation of the mechanical properties and microstructure of graphene nanoplatelet-cement composite. J Nanomater 6:200. https://doi.org/10.3390/nano6110200
Wang M, Wang R, Yao H, Farhan S, Zheng S, Du C (2016b) Study on the three dimensional mechanism of graphene oxide nanosheets modified cement. Constr Build Mater 126:730–739. https://doi.org/10.1016/j.conbuildmat.2016.09.092
Xu J, Zhang D (2017) Pressure-sensitive properties of emulsion modified graphene nanoplatelets/cement composites. Cem Concr Compos 84:74–82. https://doi.org/10.1016/j.cemconcomp.2017.07.025
Xu S, Liu J, Li Q (2015) Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste. Constr Build Mater 76:16–23. https://doi.org/10.1016/j.conbuildmat.2014.11.049
Xu G, Du S, He J, Shi X (2019) The role of admixed graphene oxide in a cement hydration system. Carbon 148:141–150. https://doi.org/10.1016/j.carbon.2019.03.072
Zappalorto M, Salviato M, Quaresimin M (2013) Mixed mode (I+ II) fracture toughness of polymer nanoclay nanocomposites. Eng Fract Mech 111:50–64. https://doi.org/10.1016/j.engfracmech.2013.09.006
Zhao L, Guo X, Ge C, Li Q, Guo L, Shu X, Liu J (2016) Investigation of the effectiveness of PC@ GO on the reinforcement for cement composites. Constr Build Mater 113:470–478. https://doi.org/10.1016/j.conbuildmat.2016.03.090
Zhao L, Guo X, Ge C, Li Q, Guo L, Shu X, Liu J (2017) Mechanical behavior and toughening mechanism of polycarboxylate superplasticizer modified graphene oxide reinforced cement composites. Compos Part B Eng 113:308–316. https://doi.org/10.1016/j.compositesb.2017.01.056
Zhou C, Li F, Hu J, Ren M, Wei J, Yu Q (2017) Enhanced mechanical properties of cement paste by hybrid graphene oxide/carbon nanotubes. Constr Build Mater 134:336–345. https://doi.org/10.1016/j.conbuildmat.2016.12.147
Zou B, Chen SJ, Korayem AH, Collins F, Wang CM, Duan WH (2015) Effect of ultrasonication energy on engineering properties of carbon nanotube reinforced cement pastes. Carbon N Y 85:212–220. https://doi.org/10.1016/j.carbon.2014.12.094
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Switzerland AG
About this entry
Cite this entry
Bhatrola, K., Maurya, S.K., Budhalakoti, B., Kothiyal, N.C. (2022). An Investigation on Mechanical Characteristics of Carbon Nanomaterials Used in Cementitious Composites. In: Shanker, U., Hussain, C.M., Rani, M. (eds) Handbook of Green and Sustainable Nanotechnology. Springer, Cham. https://doi.org/10.1007/978-3-030-69023-6_93-1
Download citation
DOI: https://doi.org/10.1007/978-3-030-69023-6_93-1
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-69023-6
Online ISBN: 978-3-030-69023-6
eBook Packages: Springer Reference Chemistry and Mat. ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics