Advertisement

Drilling for Geothermal Resources

  • John T. Finger
Reference work entry
Part of the Encyclopedia of Sustainability Science and Technology Series book series (ESSTS)

Glossary

Barrel

an extremely common unit of volume in the drilling industry, equal to 42 US gallons or 178 l

Blow out

uncontrolled flow of fluids from a wellhead or wellbore

BHA (bottom-hole assembly)

the assembly of heavy drilling tools at the bottom of the drill string; normally includes bit, reamers, stabilizers, drill collars, heavy-weight drill pipe, jars, and other miscellaneous tools

BOP (blowout preventer)

one or more devices used to seal the well at the wellhead, or top of the innermost casing string, preventing uncontrolled escape of gases, liquids, or steam; usually includes annular preventer (an inflatable bladder that seals around drill string or irregularly shaped tools) and rams (pipe rams or blind rams: pipe rams seal around the drill pipe if it is in the hole, blind rams seal against each other if the pipe is not in the hole)

Dewar

a double-walled container or heat shield, similar to a vacuum flask, which insulates a piece of equipment from high temperature

Drill...

Bibliography

  1. 1.
    The International Geothermal Market, Geothermal Energy Association, May 2015. http://geo-energy.org/reports/2015/Int'lMarketataGlanceMay2015Final5_14_15.pdf
  2. 2.
    Lund JW, Boyd TL (2015) Direct Utilization of Geothermal Energy, Worldwide Review, Proceedings World Geothermal Congress 2015Google Scholar
  3. 3.
  4. 4.
    Burgoyne AT Jr et al (1986) Applied drilling engineering. Society of Petroleum Engineers. www.spe.org
  5. 5.
    Mitchell RF (ed) (2007) Petroleum engineering handbook, volume II: drilling engineering, society of petroleum engineers. ISBN:978-1-55563-114-7Google Scholar
  6. 6.
    Cacini P, Mesini E (1994) Rock-bit wear in ultra-hot holes. SPE 28055, SPE/ISRM rock mechanics in petroleum engineering conferenceGoogle Scholar
  7. 7.
    Holligan D et al (1989) Performance of beta titanium in a Salton Sea geothermal production well. SPE 18696, SPE/IADC drilling conferenceGoogle Scholar
  8. 8.
    Mansure AJ (2002) Polyurethane grouting geothermal lost circulation zones. SPE 74556 IADC/SPE drilling conferenceGoogle Scholar
  9. 9.
    Renner JL et al (2007) Geothermal engineering, in petroleum engineering handbook, vol. VI: emerging and peripheral technologies. ISBN:978-1-55563-122-2Google Scholar
  10. 10.
    Saito S, Sakuma S (2000) Frontier geothermal drilling operations successful at 500°C BHST. SPE 65104, SPE drilling and completion, Sept 2000Google Scholar
  11. 11.
    Pierce KG, Livesay BJ (1994) A study of geothermal drilling and the production of electricity from geothermal energy, SAND92-1728, Sandia National LaboratoriesGoogle Scholar
  12. 12.
    Pierce KG, Bomber TM, Livesay BJ (1997) Well cost estimates in various geothermal regions. Geotherm Resour Counc Trans 21:119Google Scholar
  13. 13.
    Mansure AJ et al (2001) Polyurethane grouting of Rye Patch lost circulation zone. Geotherm Resour Counc Trans 25:109–114Google Scholar
  14. 14.
    Holligan D, Cron CJ, Love WW, Buster JL (1989) Performance of beta titanium in a Salton Sea field geothermal production well source. SPE18696, SPE/IADC drilling conference, New OrleansGoogle Scholar
  15. 15.
    Finger JT, Jacobson RD, Hickox CE (1997) Newberry exploratory slimhole: drilling and testing SAND97-2790, Sandia National LaboratoriesGoogle Scholar
  16. 16.
    Finger JT, Jacobson RD, Hickox CE (1996) Vale exploratory slimhole: drilling and testing SAND96-1396, Sandia National LaboratoriesGoogle Scholar
  17. 17.
    Finger JT, et al (1999) Slimhole handbook: procedures and recommendations for slimhole drilling and testing in geothermal exploration SAND99-1976, Sandia National LaboratoriesGoogle Scholar
  18. 18.
  19. 19.
    Combs J, Garg SK, Livesay BJ (2000) Maximum discharge of geothermal fluids from slim holes by optimizing casing designs. Geotherm Resour Counc Trans 24Google Scholar
  20. 20.
    Cavanaugh JM, Adams DM (1988) Top-drive drilling system evaluation. SPE Drill Eng 3(1):43–49CrossRefGoogle Scholar
  21. 21.
    Saito S et al (2003) Advantages of using top-drive system for high temperature geothermal well drilling. Geotherm Resourc Counc Trans 27:183–187Google Scholar
  22. 22.
    U.S. Patent 930,758 “Drill” issued 10 Aug 1909Google Scholar
  23. 23.
    Finger JT, Glowka DA (1989) PDC bit research at Sandia National Laboratories Sandia Report SAND89-0079, Sandia National LaboratoriesGoogle Scholar
  24. 24.
    Wise JL et al (2003) Hard-rock drilling performance of a conventional PDC drag bit operated with, and without, benefit of real-time downhole diagnostics. Geotherm Resour Counc Trans 27:197–206Google Scholar
  25. 25.
    Hareland G et al (2009) Cutting efficiency of a single PDC cutter on hard rock. J Can Pet Technol 48(6):60–65CrossRefGoogle Scholar
  26. 26.
    Chatterjee K, Macpherson J, Dick A, Grimmer H, Klotzer S, Schroder J, Epplin D, Hohl C, Gacek S (2016) Development of a directional drilling system for operation at 300 °C for geothermal applications, Geotherm Resourc Counc Trans 40. https://assets.www.bakerhughes.com/system/4e6a243f4f59d8721520783615428f5d_33655_-Kymera-IcelandCH.1128_HiRes.pdf
  27. 27.
    Graham P, Krough B, Nelson T, White A, Self J (2016) Innovative conical diamond element bit in conjunction with novel drilling practices increases performance in hard-rock geothermal applications, California. Geotherm Resourc Counc Trans 40Google Scholar
  28. 28.
    Rickard WM, Johnson B, Mansure AJ, Jacobson RD (2001) Application of dual tube flooded reverse circulation drilling to Rye Patch lost circulation zone. Geotherm Resour Counc Trans 24Google Scholar
  29. 29.
    Zilch HE, Otto MJ, Pye DS (1991) The evolution of geothermal drilling fluid in the imperial valley SPE21786, presentation at the SPE Western Regional Meeting, Long BeachGoogle Scholar
  30. 30.
    Carter TS (ed) (1997) Drilling fluids. Society of Petroleum Engineers. ISBN:978-1-55563-069-0Google Scholar
  31. 31.
    Bourgoyne Jr AT, Millheim KK, Chenevert ME, Young Jr FS (1991) Applied drilling engineering. Society of Petroleum Engineers. ISBN:978-1-55563-001-0Google Scholar
  32. 32.
    American Petroleum Institute (2003) RP 13B-1/ISO 10414-1, recommended practice for field testing water-based drilling fluids (includes Errata, July 2004). Product Number: GX13B13Google Scholar
  33. 33.
    Tuttle JD (2005) Drilling fluids for the geothermal industry – recent innovations. Geotherm Resour Counc Trans 29Google Scholar
  34. 34.
    Jaimes-Maldonado J, Cornejo-Castro S (2006) Case study: underbalanced or mud drilling fluids at Tres Virgenes geothermal field. Geotherm Resour Counc Trans 30Google Scholar
  35. 35.
    Finger JT, Jacobson RD, Hickox CE, Combs J, Polk G, Goranson C (1999) Slimhole handbook: procedures and recommendations for slimhole drilling and testing in geothermal exploration Sandia Report SAND99-1976, Sandia National LaboratoriesGoogle Scholar
  36. 36.
    Carson CC, Lin YT (1982) The impact of common problems in geothermal drilling and completion. Geotherm Resour Counc Trans 6:195–198Google Scholar
  37. 37.
    Rickard WM et al (2001) Application of dual tube flooded reverse circulation drilling to Rye Patch lost circulation zone. Geotherm Resour Counc Trans 25:133–138Google Scholar
  38. 38.
    Mansure AJ, Bauer SJ (2005) Advances in geothermal drilling technology: reducing cost while improving longevity of the well. Geotherm Resour Counc Trans 29Google Scholar
  39. 39.
    Petty S et al (2005) Lessons learned in drilling DB-1 and DB-2, Blue Mountain NV, proceedings, thirtieth workshop on geothermal reservoir engineering. Stanford University. http://pangea.stanford.edu
  40. 40.
    Drotning WD, Ortega A, Harvey PE (1982) Thermal conductivity of aqueous foam, Sandia report SAND82-0742, Sandia National LaboratoriesGoogle Scholar
  41. 41.
    Rand PB, Montoya O (1983) Evaluation of aqueous foam surfactants for geothermal drilling fluids Sandia report SAND83-0584, Sandia National LaboratoriesGoogle Scholar
  42. 42.
    Gislason T, Richter B (2008) The aerated drilling experience of Icelandic geothermal wells. Geotherm Resour Counc Trans 32:32–33Google Scholar
  43. 43.
    Toni A, Pratama RA, Prasetyo IM, Saputra MB (2016) The deepest geothermal well in Indonesia: a success story of aerated drilling utilization. Geotherm Resourc Counc Trans 40Google Scholar
  44. 44.
    Loeppke G (1986) Evaluating candidate lost circulation materials for geothermal drilling. Geotherm Resour Counc Trans 10Google Scholar
  45. 45.
    Sugama T et al (1986) Bentonite-based ammonium polyphosphate cementitious lost-circulation control materials. J Mater Sci 21:2159–2168CrossRefGoogle Scholar
  46. 46.
    Staller GE (1999) Design, development and testing of a drillable straddle packer for lost circulation control in geothermal drilling, Sandia report SAND99-0819, Sandia National LaboratoriesGoogle Scholar
  47. 47.
    Glowka DA et al (1989) Laboratory and field evaluation of polyurethane foam for lost circulation control. Geotherm Resour Counc Trans 13Google Scholar
  48. 48.
    Mansure AJ, Westmoreland JJ (1999) Chemical grouting lost-circulation zones with polyurethane foam. Geotherm Resour Counc Trans 23:165–168Google Scholar
  49. 49.
    Mansure AJ et al (2004) Polymer grouts for plugging lost circulation in geothermal wells, Sandia report SAND2004-5853, Sandia National LaboratoriesGoogle Scholar
  50. 50.
    Schafer DM et al (1992) Development and use of a return line flowmeter for lost circulation diagnosis in geothermal drilling. Geotherm Resour Counc Trans 16Google Scholar
  51. 51.
    Whitlow GL et al (1996) Development and use of rolling float meters and doppler flow meters to monitor inflow and outflow while drilling geothermal wells. Geotherm Resour Counc Trans 20:515Google Scholar
  52. 52.
    Manual M07, California Department of Conservation (2006) Blowout prevention in California, available at http://www.conservation.ca.gov/dog/geothermal/pubs_stats/Pages/instruction_manuals.aspx
  53. 53.
    Karner SL (2005) Creating permeable fracture networks for EGS: engineered systems versus nature. Geotherm Resour Counc Trans 29Google Scholar
  54. 54.
    New Scientist (1991) Blowout blights future of Hawaii’s geothermal power, 20 July 1991, issue 1778Google Scholar
  55. 55.
    Herras EB et al (2004) A geoscientific approach in the design and success of the first relief well at the Leyte geothermal production field. Geotherm Resour Counc Trans 28:159–162Google Scholar
  56. 56.
    Pye DS, Hamblin GM (1991) Drilling geothermal wells at the Geysers field. Geothermal Resources Council, monograph on the Geysers geothermal field, special report no. 17Google Scholar
  57. 57.
    Nelson EB et al (1981) Evaluation and development of cement systems for geothermal wells SPE10217. Society of Petroleum EngineersGoogle Scholar
  58. 58.
    Bour DL, Hernandez R (2003) CO2 resistance, improved mechanical durability, and successful placement in a problematic lost circulation interval achieved: reverse circulation of foamed calcium aluminate cement in a geothermal well. Geotherm Resour Counc Trans 27:163–168Google Scholar
  59. 59.
    Spielman P et al (2006) Reverse circulation of foamed cement in geothermal wells. Geotherm Resour Counc Trans 30Google Scholar
  60. 60.
    Saito S (1994) A new advanced method for top-job casing cementing. Geotherm Resour Counc Trans 18:99Google Scholar
  61. 61.
    Koons BE et al (1993) New design guidelines for geothermal cement slurries. Geotherm Resour Counc Trans 17Google Scholar
  62. 62.
    Nelson EB Development of geothermal well completion systems, final report, Dowell Division, Dow Chemical, U.S.A., DOE contract DE-ACO2-77ET28324Google Scholar
  63. 63.
    Kalyoncu RS, Snyder MJ (1981) High-temperature cementing materials for completion of geothermal wells, BNL-33127, Brookhaven National LaboratoryGoogle Scholar
  64. 64.
    Curtice DK, Mallow WA (1979) Hydrothermal cements for use in the completion of geothermal wells. Southwest Research Institute, BNL 51183Google Scholar
  65. 65.
    Rockett TJ (1979) Phosphate-bonded glass cements for geothermal wells. University of Rhode Island, BNL 51153Google Scholar
  66. 66.
    Zeldin AN, Kukacka LE (1980) Polymer cement geothermal well-completion materials, final report, Brookhaven National Laboratory, BNL 51287Google Scholar
  67. 67.
    Roy DM et al (1980) New high temperature cementing-materials for geothermal wells: stability and properties. The Pennsylvania State University, BNL 51249Google Scholar
  68. 68.
    Kukacka L (1997) Geothermal materials development at Brookhaven National Laboratory, BNL-64482, Brookhaven National LaboratoryGoogle Scholar
  69. 69.
    Sugama T (2006) Advanced cements for geothermal wells, BNL 77901-2007-IR, Brookhaven National LaboratoryGoogle Scholar
  70. 70.
    Ocampo-Díaz J, Rojas-Bribiesca M (2004) Production problems review of Las Tres Virgenes geothermal field, Mexico. Geotherm Resour Counc Trans 28:499–502Google Scholar
  71. 71.
    Hurtado R, Mercado S (1990) Scale control studies at the Cerro Prieto geothermal plant. Geotherm Resour Counc Trans 14Google Scholar
  72. 72.
    Southon JNA (2005) Geothermal well design, construction and failures. In: Proceedings world geothermal congress, AntalyaGoogle Scholar
  73. 73.
    Harmse JE et al (1997) Automatic detection and diagnosis of problems in drilling geothermal wells. Geotherm Resour Counc Trans 21:107Google Scholar
  74. 74.
    Drumheller DS, Kuszmaul SS (2003) Acoustic telemetry, Sandia report SAND2003-2614, Sandia National LaboratoriesGoogle Scholar
  75. 75.
    Normann RA, Henfling JA (2004) Aerospace R & D benefits future geothermal reservoir monitoring. Geotherm Resour Counc Trans 28Google Scholar
  76. 76.
    Henfling JA, Normann RA (2002) Advancement in HT electronics for geothermal drilling and logging tools. Geotherm Resour Counc Trans 26:627–632Google Scholar
  77. 77.
    Mansure AJ et al (2005) Geothermal well cost analyses 2005. Geotherm Resour Counc Trans 29Google Scholar
  78. 78.
    Warren TM (2009) Casing while drilling, in advanced drilling and well technology. Society of Petroleum Engineers. ISBN:978-1-55563-145-1Google Scholar
  79. 79.
    Polsky Y (2008) Enhanced Geothermal Systems (EGS) well construction technology evaluation report, SAND2008-7866, Sandia National LaboratoriesGoogle Scholar
  80. 80.
    Tessari RM, Warren TM (2003) Casing drilling reduces lost circulation problems. Geotherm Resour Counc Trans 27:189–196Google Scholar
  81. 81.
    Tubbs D, Wallace J (2006) Slimming the wellbore design enhances drilling economics in field development. SPE 102929, SPE annual conference and exhibitionGoogle Scholar
  82. 82.
    Nylund J et al (2009) Integrating solid expandables, swellables, and hydra jet perforating for optimized multi-zone fractured wellbores. SPE 125345, tight gas completions conferenceGoogle Scholar
  83. 83.
    Chatterjee K, Dick A, Macpherson J (2015) High temperature 300 °C directional drilling system, including drill bit, steerable motor and drilling fluid, for enhanced geothermal systems, July 2015, https://www.osti.gov/scitech/servlets/purl/1208637
  84. 84.
  85. 85.
    Shuttleworth NE et al (1998) Revised drilling practices, VSS-MWD tool successfully addresses catastrophic bit/drillstring vibrations. SPE 39314, SPE/IADC drilling conferenceGoogle Scholar
  86. 86.
    Drilling Engineering Association and Energy Research Clearing House (1999) Flat time reduction opportunities: an industry forum, Houston Advanced Research Center, 21 Sept 1999Google Scholar
  87. 87.
    Jellison MJ et al (2003) Telemetry drill pipe: enabling technology for the downhole internet. SPE 79885, IADC/SPE drilling conferenceGoogle Scholar
  88. 88.
    Allen S et al (2009) Step-change improvements with wired-pipe telemetry. SPE 119570, SPE/IADC drilling conferenceGoogle Scholar
  89. 89.
    Finger JT et al (2003) Development of a system for diagnostic-while-drilling (DWD). SPE 79884, IADC/SPE drilling conferenceGoogle Scholar
  90. 90.
    Blankenship DA et al (2005) High-temperature diagnostics-while-drilling system. Geotherm Resour Counc Trans 28Google Scholar
  91. 91.
    CFR Part 3200 (1998) Geothermal resources leasing and operations; Final Rule, Federal Register, vol 63, no 189, 30 Sept 1998Google Scholar
  92. 92.
    Standards Association of New Zealand (1991) New Zealand standards NZS 2403:1991 code of practice for deep geothermal wells, 93 ppGoogle Scholar

Copyright information

© This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply 2018

Authors and Affiliations

  1. 1.AlbuquerqueUSA

Personalised recommendations