Encyclopedia of Sustainability Science and Technology

Living Edition
| Editors: Robert A. Meyers

Waste Collection and Transport

  • Jess W. Everett
Living reference work entry
DOI: https://doi.org/10.1007/978-1-4939-2493-6_124-3

Glossary

Collection vehicle

Vehicle designed to collect waste.

Collection

Obtaining materials from the curbside or drop-off centers and bringing that material to an unloading point.

Curbside collection

Collecting materials from each household, at the front curb or back alley.

Drop-off center

A centrally located facility, with large containers for each type of material, from which material is collected.

Generation

The act of creating a waste.

Material recovery facility

Special type of transfer station, where recyclables are processed before transport.

Participation rate

The fraction of households that regularly present materials properly.

Presentation

Placing waste materials in the proper location for collection by the municipal waste collection program.

Processing

Changing the properties of a waste material, e.g., compacting cans.

Residual waste

Materials remaining as waste after reuse, recycling, or processing.

Separation

Placing different waste materials in different containers.

Setou...
This is a preview of subscription content, log in to check access.

Bibliography

Primary Literature

  1. 1.
    Tchobanoglous G, Hilary T, Vigil S (1993) Integrated solid waste management: engineering principles and management issues. Irwin/Mc-Graw-Hill, New YorkGoogle Scholar
  2. 2.
    Belton V, Crowe D, Matthews R, Scott S (1994) A survey of public attitudes to recycling in glassgo (UK). Waste Manag Res 12:351–367CrossRefGoogle Scholar
  3. 3.
    Valeo C, Baetz B, Tsanis I (1998) Location of recycling depots with GIS. J Urban Plann Dev 124(2):93–99CrossRefGoogle Scholar
  4. 4.
    Aremu A, Sule B (2012) A case study evaluation of the impacts of optimised waste bin locations in a developing city. Civ Eng Environ Syst 29(2):137–146CrossRefGoogle Scholar
  5. 5.
    Bacha H, Mild A, Natter M, Weber A (2004) Combining socio-demographic and logistic factors to explain the generation and collection of waste paper. Resour Conserv Recycl 41:65–73CrossRefGoogle Scholar
  6. 6.
    Williams I, Taylor C (2004) Maximising household waste recycling at civic amenity sites in Lancashire, England. Waste Manag 24:861–874CrossRefGoogle Scholar
  7. 7.
    Wilson B, Baetz B (2001) Modeling municipal solid waste collection systems using derived probability distributions. I: model development. J Environ Eng 127(11):1031–1038CrossRefGoogle Scholar
  8. 8.
    Everett J (1994) Environmental collective action: residential recycling programs. J Prof Issues Eng Educ Pract 120(2):158–176CrossRefGoogle Scholar
  9. 9.
    Olson M (1965) The logic of collective action. Harvard University Press, Cambridge, MAGoogle Scholar
  10. 10.
    USEPA (2003) Pay-as-you-throw: a cooling effect on climate change. US Environmental Protection Agency, EPA 530-F-03-008Google Scholar
  11. 11.
    Everett J, Peirce J (1991) National analysis of recycling material recovery rates. J Resour Manage Technol 19(4):148–152Google Scholar
  12. 12.
    Everett J, Peirce J (1993) Curbside recycling in the USA: convenience and mandatory participation. Waste Manag Res 11:49–61CrossRefGoogle Scholar
  13. 13.
    García-Sánchez I (2008) The performance of Spanish solid waste collection. Waste Manag Res 26:327–336CrossRefGoogle Scholar
  14. 14.
    Rogers J, Englehardt J, An H, Fleming L (2002) Solid waste collection health and safety risks – survey of municipal solid waste collectors. J Solid Waste Technol Manage 28(3):154–160Google Scholar
  15. 15.
    Medina M (2005) Serving the unserved: informal refuse collection in Mexico. Waste Manag Res 23:390–397CrossRefGoogle Scholar
  16. 16.
    WRAP (2008) Kerbside recycling: indicative costs and performance. WRAP, Banbury/OxonGoogle Scholar
  17. 17.
    Wilson B, Baetz B (2001) Modeling municipal solid waste collection systems using derived probability distributions. II: extensions and applications. J Environ Eng 127(11):1039–1047CrossRefGoogle Scholar
  18. 18.
    Dahlén L, Vukicevic S, Meijer J-E, Lagerkvist A (2007) Comparison of different collection systems for sorted household waste in Sweden. Waste Manag 27:1298–1305CrossRefGoogle Scholar
  19. 19.
    Hage O, Soderholm P (2008) An econometric analysis of regional differences in household waste collection: the case of plastic packaging waste in Sweden. Waste Manag 28:1720–1731CrossRefGoogle Scholar
  20. 20.
    Gomes A, Matos M, Carvalho I (2008) Separate collection of the biodegradable fraction of MSW: an economic assessment. Waste Manag 28:1711–1719CrossRefGoogle Scholar
  21. 21.
    McLeod F, Cherrett T (2008) Quantifying the transport impacts of domestic waste collection strategies. Waste Manag 28:2271–2278CrossRefGoogle Scholar
  22. 22.
    Tavares G, Zsigraiova Z, Semiao V, Carvalho M (2009) Optimisation of MSW collection routes for minimum fuel consumption using 3D GIS modeling. Waste Manag 29:1176–1185CrossRefGoogle Scholar
  23. 23.
    Ni-Bin C, Lu H, Wei Y (1997) GIS technology for vehicle routing and scheduling in solid waste collection systems. J Environ Eng 123(9):901–910CrossRefGoogle Scholar
  24. 24.
    Karadimas N, Papatzelou K, Loumos V (2007) Optimal solid waste collection routes identified by the ant colony system algorithm. Waste Manag Res 25:139–147CrossRefGoogle Scholar
  25. 25.
    Filipiak K, Abdel-Malek L, Hsieh H-N, Meegoda J (2009) Optimization of municipal solid waste collection system: case study. Pract Period Hazard Toxic Radioact Waste Manag 13(3):210–216CrossRefGoogle Scholar
  26. 26.
    Nuortioa T, Kytöjokib J, Niskaa H, Bröysyb O (2006) Improved route planning and scheduling of waste collection and transport. Expert Syst Appl 30:223–232CrossRefGoogle Scholar
  27. 27.
    Kima B-I, Kimb S, Sahoob S (2006) Waste collection vehicle routing problem with time windows. Comput Oper Res 33:3624–3642CrossRefGoogle Scholar
  28. 28.
    Batool S, Chuadhry M (2009) The impact of municipal solid waste treatment methods on greenhouse gas emissions in Lahore, Pakistan. Waste Manag 29:63–69CrossRefGoogle Scholar
  29. 29.
    Solano E, Ranjitan R, Barlaz M, Brill D (2002) Life-cycle-based solid waste management I: model development. J Environ Eng 128(10):981–992CrossRefGoogle Scholar
  30. 30.
    Solano E, Dumas R, Harrison K, Ranjitan R, Barlaz M, Brill D (2002) Life-cycle-based solid waste management II: illustrative applications. J Environ Eng 128(10):981–992CrossRefGoogle Scholar
  31. 31.
    Iriarte A, Gabarrell X, Rieradevall J (2009) LCA of selective waste collection systems in dense urban areas. Waste Manag 29:903–914CrossRefGoogle Scholar
  32. 32.
    Nino D, Tony BB (1996) Environmental linkages between urban form and municipal solid waste management infrastructure. J Urban Plann Dev 122(3):83–99CrossRefGoogle Scholar
  33. 33.
    Maimoun M, Reinhart D, Gammohb F, McCauley Bush P (2013) Emissions from US waste collection vehicles. Waste Manag 33:1079–1089CrossRefGoogle Scholar
  34. 34.
    Sandhu G, Frey H, Bartelt-Hunt S, Jones E (2016) Real-world activity, fuel use, and emissions of diesel side-loader refuse trucks. Atmos Environ 129:98–104CrossRefGoogle Scholar
  35. 35.
    Jaunich M, Levis J, DeCarolis J, Gaston E, Barlaz M, Bartelt-Hunt S, Jones E, Hauser L, Jaikumar R (2016) Characterization of municipal solid waste collection operations. Resour Conserv Recycl 114:92–102CrossRefGoogle Scholar
  36. 36.
    Shapek R (1995) Local government household battery collection programs: costs and benefits. Resour Conserv Recycl 15:1–19CrossRefGoogle Scholar
  37. 37.
    Wilson B, Vincent J (2008) Estimating waste transfer station delays using GPS. Waste Manag 28:1742–1750CrossRefGoogle Scholar
  38. 38.
    Komilis D (2008) Conceptual modeling to optimize the haul and transfer of municipal solid waste. Waste Manag 28:2355–2365CrossRefGoogle Scholar
  39. 39.
    Chatzouridis C, Komilis D (2012) A methodology to optimally site and design municipal solid waste transfer stations using binary programming. Resour Conserv Recycl 60:89–98CrossRefGoogle Scholar
  40. 40.
    Bovea M, Powell J, Gallardo A, Capuz-Rizo S (2007) The role played by environmental factors in the integration of a transfer station in a municipal solid waste management system. Waste Manag 27:545–553CrossRefGoogle Scholar
  41. 41.
    Eshet T, Baron M, Shechter M, Ayalon O (2007) Measuring externalities of waste transfer stations in Israel using hedonic pricing. Waste Manag 27:614–625CrossRefGoogle Scholar
  42. 42.
    Eisted R, Larsen A, Christensen T (2009) Collection, transfer and transport of waste: accounting of greenhouse gases and global warming contribution. Waste Manag Res 27:738–745CrossRefGoogle Scholar
  43. 43.
    Chunping L, Guoxue L, Yiming L, Yanfu L, Jian H (2008) Environmental monitoring and fuzzy synthetic evaluation of municipal solid waste transfer stations in Beijing in 2001-2006. J Environ Sci 20:998–1005CrossRefGoogle Scholar
  44. 44.
    Salhofer S, Schneider F, Obersteiner G (2007) The ecological relevance of transport in waste disposal systems in Western Europe. Waste Manag 27:S47–S57CrossRefGoogle Scholar
  45. 45.
    Zhen-Shan L, Lei Y, Xiao-Yan Q, Yu-mei S (2009) Municipal solid waste management in Beijing City. Waste Manag 29:2596–2599CrossRefGoogle Scholar
  46. 46.
    Diaz R, Warith M (2006) Life-cycle assessment of municipal solid wastes: development of the WASTED model. Waste Manag 26:886–901CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media LLC 2018

Authors and Affiliations

  1. 1.Civil and Environmental EngineeringRowan UniversityGlassboroUSA

Section editors and affiliations

  • A. C. (Thanos) Bourtsalas
    • 1
  • Nickolas J. Themelis
    • 2
  1. 1.Earth Engineering Center, Columbia UniversityNew YorkUSA
  2. 2.Earth and Environmental EngineeringColumbia UniversityNew YorkUSA