Advertisement

Metrology pp 1-30 | Cite as

Optical Sensors for Machine Tool Metrology

  • Zhi-Feng Lou
  • Kuang-Chao FanEmail author
Living reference work entry
Part of the Precision Manufacturing book series (PRECISION)

Abstract

The development of smart machine tools will be the trend toward the worldwide need of intelligent manufacturing technology nowadays, which is the goal of industry 4.0 as well as cyber-physical system and China made 2025. Current techniques for machine tool metrology are implemented by measuring instruments mainly suggested by the ISO 230 series of international standard. Although these instruments are used to measure geometric errors of each axis of machine tool, they cannot be used as sensors for real-time detection since they are expensive and are in bulky sizes. In order to understand the functions of the optical sensors for machine tool metrology, this chapter firstly addresses the importance of geometric errors to the accuracy of machine tools. Abbe principle and Bryan principle are two important guidelines in machine design and measurement technology. The volumetric errors of machine tools are largely affected by these two principles. This is the second topic highlighted in this chapter. Some small and low-cost optical sensors for geometric error measurements are presented. These sensors can be portably mounted onto the machine frame for online measurement. They can also be embedded in the machine structure as feedback sensors for respective geometric errors. The integration of individual sensors into a multi-degree-of-freedom measuring (MDFM) module for volumetric error measurement and compensation is also introduced. Some applications of developed optical sensors to measure machine tool errors are described in the last part of this chapter. Experimental validation shows the feasibility of developed optical sensors for machine tool metrology and error compensation. This chapter neither includes the measuring instruments for ISO 230 series as these are the subject of other chapter nor those MDFM systems reported by many other researchers because those are mainly at the laboratory level and not ready for practice on machine tools.

Keywords

Geometric errors Volumetric errors Optical sensors Machine tools Abbe principle Bryan principle 6-DOF MDFM Assembly process 

References

  1. Abbé E (1890) Meßapparate für physiker. Z Instrumentenkd 10:446–448Google Scholar
  2. Bryan JB (1979) The Abbe principle revisit: an updated interpretation. Precis Eng 1:129–132CrossRefGoogle Scholar
  3. Drescher J (2003) Analytical estimation of measurement uncertainty in surface plate calibration by the Moody method using differential levels. Precis Eng 27:323–332CrossRefGoogle Scholar
  4. Ekinci TO, Mayer JRP (2007) Relationships between straightness and angular kinematic errors in machines. Int J Mach Tools Manuf 47:1997–2004CrossRefGoogle Scholar
  5. Fan KC, Zhao Y (2000) A laser straightness measurement system using optical fiber and modulation technique. Int J Mach Tools Manuf 40:2073–2081CrossRefGoogle Scholar
  6. Fan KC, Wang TH, Wang CH, Chen HM (2012) Development of an Abbe error compensator for NC machine tools. In: Proceedings of the 37th MATADOR conference, Manchester, 25–27 July, pp 317–322Google Scholar
  7. Fan KC, Wang HY, Yang HW, Chen LM (2014) Techniques of multi-degree-of-freedom measurement on the linear motion error of precision machines. Adv Opt Technol 3(4):375–386Google Scholar
  8. Ferreira PM, Liu CR (1993) A method for estimating and compensating quasi-static errors of machine tools. Trans ASME J Eng Ind 115:149–159CrossRefGoogle Scholar
  9. Gao W (2010) Precision nanometrology. Springer, New YorkCrossRefGoogle Scholar
  10. Gao W, Wu SM, Boss H, Haitjema H et al (2015) Measurement technologies for precision positioning. CIRP Ann Manuf Technol 64:773–796CrossRefGoogle Scholar
  11. ISO 230-1:2012. Test code for machine tools – Part 1: geometric accuracy of machines operating under no-load or quasi-static load conditionsGoogle Scholar
  12. ISO 230-2:2014. Test code for machine tools – Part 2: determination of accuracy and repeatability of positioning of numerically controlled axesGoogle Scholar
  13. ISO 230-4:2015. Test code for machine tools – Part 4: circular tests for numerically controlled machine toolsGoogle Scholar
  14. ISO 230-6:2012. Test code for machine tools – Part 6: determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)Google Scholar
  15. ISO 230-7:2015. Test code for machine tools – Part 7: geometric accuracy of axes of rotationGoogle Scholar
  16. ISO/WDTR 230-11.3:2011. Test code for machine tools – Part 11: measuring instruments and their application to the machine tool geometry testsGoogle Scholar
  17. Jiang H, Yin C (2000) Sensitivity enhanced roll angle measurement. Opt Eng 39(2):516–519CrossRefGoogle Scholar
  18. Li YT, Fan KC (2017) A novel method of angular positioning error analysis of rotary stages based on the Abbe principle. Proc Inst Mech Eng B J Eng Manuf, Special issue article, 1–8Google Scholar
  19. Majda P (2012) Relation between kinematic straightness errors and angular errors of machine tool. Adv Manuf Sci Technol 36(1):47–53Google Scholar
  20. Marsh E (2010) Precision spindle metrology, 2nd edn. DEStech Publications, LancasterGoogle Scholar
  21. Ni J, Huang PS, Wu SM (1992) A multi-degree-of-freedom measuring system for CMM geometric errors. Trans ASME J Eng Ind 114:362–269Google Scholar
  22. Okafor AC, Ertekin YM (2000) Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics. Int J Mach Tools Manuf 40(8):1199–1213CrossRefGoogle Scholar
  23. Soons J, Theuws F, Schellekens P (1992) Modeling the errors of multi-axis machines: a general methodology. Precis Eng 14(1):5–19CrossRefGoogle Scholar
  24. Tlusty J (1980) Testing of accuracy of machine tool. In: Technology of machine tools, supplement 1. National Livermore National Laboratory, LivermoreGoogle Scholar
  25. Zhai Y, Feng Q, Zhang B (2012) A simple roll measurement method based on rectangular-prism. Opt Laser Technol 44:839–843CrossRefGoogle Scholar
  26. Zhu F, Tan JB, Cui JW (2013) Beam splitting target reflector based compensation for angular drift of laser beam in laser autocollimation of measuring small angle deviations. Rev Sci Instrum 84:065116CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Key Laboratory for Precision & Non-traditional Machining of Ministry of Education, School of Mechanical EngineeringDalian University of TechnologyDalianChina
  2. 2.Department of Mechanical EngineeringNational Taiwan UniversityTapeiTaiwan

Personalised recommendations