Encyclopedia of Nanotechnology

Living Edition
| Editors: Bharat Bhushan

Nano-tribology Applications in Microprojector Technology

Living reference work entry
DOI: https://doi.org/10.1007/978-94-007-6178-0_281-2

Definition

Microprojectors are being developed to project a larger image from a smaller display in handheld electronic devices such as cell phone, handheld PDA, etc. The technology associated with microprojectors has several applications of nano-tribology and those are described in this entry.

Introduction to Microprojector Technology

The capacity of high-speed wireless networks has enabled carriers to provide multimedia services to consumers such as web browsing, live television and gaming, etc. At the same time, the electronics industry is driving toward miniaturization which in turn led to the smaller size of displays on the electronic devices. The smaller display limits the full utilization and enjoyment of these services. Microprojectors have been proposed to address this issue. These devices can either be as an accessory to any electronic device or an embedded component within a mobile device. These are expected to provide images of the size of A4 paper and larger in indoor...

Keywords

Contact Angle Carbon Fiber Plasma Treatment Second Harmonic Generate Adhesive Force 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in to check access

References

  1. 1.
    Bhatia, V., Gregorski, S.J., Pikula, D., Chaparala, S.C., Loeber, D.A.S., Gollier, J., Gregorski, J.D., Hempstead, M., Ozeki, Y., Hata, Y., Shibatani, K., Nagai, F., Mori, N., Nakabayashi, Y., Mitsugi, N., Nakano, S.: Efficient and compact green laser for micro-projector applications. J. Soc. Inf. Disp. 17(3), 1–6 (2009)CrossRefGoogle Scholar
  2. 2.
    Freeman, M., Champion, M., Madhavan, S.: Scanned laser pico-projectors. Opt. Photonics News 20, 29–34 (2009)CrossRefGoogle Scholar
  3. 3.
    Yoshizumi, Y., Adachi, M., Enya, Y., Kyono, T., Tokuyama, S., Sumitomo, T., Akita, K., Ikegami, T., Ueno, M., Katayama, K., Nakamura, T.: Continuous-wave operation of 520 nm green InGaN-based laser diodes on semi-polar {2021} GaN substrates. Appl. Phys. Express 2, 092101-1–092101-3 (2009)CrossRefGoogle Scholar
  4. 4.
    Bhatia, V., Gregorski, S.J., Pikula, D., Chaparala, S.C., Loeber, D.A.S., Gollier, J., Ozeki, Y., Hata, Y., Shibatani, K., Nagai, F., Mori, N., Nakabayashi, Y., Mitsugi, N., Nakano, S.: Efficient and compact green laser incorporating adaptive optics for wide operating temperature range. SID Int. Symp. Digest Tech. Pap. 39, 962–965 (2008)CrossRefGoogle Scholar
  5. 5.
    Bhushan, B., Zhao, Z.: Macroscale and microscale tribological studies of molecularly thick boundary layers of perfluoropolyether lubricants for magnetic thin-film rigid disks. J. Info. Storage Proc. Syst. 1, 1–21 (1999)Google Scholar
  6. 6.
    Bhushan, B., Lee, H., Chaparala, S.C., Bhatia, V.: Nanolubrication of sliding components in adaptive optics used in microprojectors. Appl. Surf. Sci. 256, 7545–7558 (2010)CrossRefGoogle Scholar
  7. 7.
    Graham-Rowe, D.: Projectors get personal. Nat. Photonics 1, 677–679 (2007)CrossRefGoogle Scholar
  8. 8.
    Bhatia, V., Hempstead, M., Grochosinski, J., Sekiguchi, N., Okada, A., Loeber, D.: Compact and efficient green lasers for mobile projector applications. J. Soc. Inf. Disp. 17(1), 1–6 (2009)CrossRefGoogle Scholar
  9. 9.
    Hancox, N.L.: The use of a torsion machine to measure the shear strength and modulus of unidirectional carbon fiber reinforced plastic composites. J. Mater. Sci. 7, 1030–1036 (1972)CrossRefGoogle Scholar
  10. 10.
    Ogisu, T., Shimanuki, M., Kiyoshima, S., Takeda, N.: A basic study of CFRP laminates with embedded prestrained SMA foils for aircraft structures. J. Intell. Mater. Syst. Struct. 16, 175–185 (2005)CrossRefGoogle Scholar
  11. 11.
    HeroldSchmidt, U., Floeth, E., Last, B., Schafer, W., Zaglauer, H.W.: Quantification of smart composites for the use in aerospace applications. Proc. Soc. Photo-Opt. Instrum. Eng. 3044, 168–175 (1997)Google Scholar
  12. 12.
    Lee, C.K.: Structure, electrochemical and wear-corrosion properties of electroless nickel-phosphorus deposition on CFRP composites. Mater. Chem. Phys. 114, 125–133 (2009)CrossRefGoogle Scholar
  13. 13.
    Rion, J., Leterrier, Y., Manson, J.A.E., Blairon, J.M.: Ultra-light asymmetric photovoltaic sandwich structures. Compos. A: Appl. Sci. Manuf. 40, 1167–1173 (2009)CrossRefGoogle Scholar
  14. 14.
    Palacio, M., Bhushan, B.: Nanotribological properties of novel lubrications for magnetic tapes. Ultramicroscopy 109, 980–990 (2009)CrossRefGoogle Scholar
  15. 15.
    Tao, Z., Bhushan, B.: Bonding, degradation, and environmental effects on novel perfluoropolyether lubricants. Wear 259, 1352–1361 (2005)CrossRefGoogle Scholar
  16. 16.
    Liu, H., Bhushan, B.: Nanotribological characterization of molecularly thick lubricant films for applications to MEMS/NEMS by AFM. Ultramicroscopy 97, 321–340 (2003)CrossRefGoogle Scholar
  17. 17.
    Koinkar, V.N., Bhushan, B.: Microtribological studies of unlubricated and lubricated surfaces using atomic force/friction force microscopy. J. Vac. Sci. Technol. A 14, 2378–2391 (1996)CrossRefGoogle Scholar
  18. 18.
    Zhao, X., Bhushan, B.: Study on degradation mechanisms of lubricants for magnetic thin film rigid disks. Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 215, 173–181 (2001)CrossRefGoogle Scholar
  19. 19.
    Bhushan, B., Lee, H., Chaparala, S.C., Bhatia, V.: Chemical bonding and degradation of ultrathin liquid films for nanolubrication of sliding components in adaptive optics. Colloids Surf. A 369, 39–52 (2010)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2016

Authors and Affiliations

  1. 1.Science and TechnologyCorning Incorporated SP-PR-02-1CorningUSA