Advertisement

Compliant Leg Mechanism of Coman

  • Nikos G. Tsagarakis
  • Gustavo Medrano Cerda
  • Darwin G. Caldwell
Reference work entry

Abstract

The incorporation of passive compliance in robotic systems has the potential to improve their performance during interactions and impacts, enhance their energy storage and efficiency, and facilitate greater general safety for the robots, humans, and environment. This chapter introduces the design and mechatronics of the leg mechanisms developed for COmpliant huMANoid COMAN. The COMAN leg is powered by passive compliance drives based on a series elastic actuation principle (SEA). Within the chapter, the design and implementation of the COMAN leg is discussed including the details of the SEA drive, the realization of the different leg joints, and the tuning of the joint distributed passive elasticity. The joint stiffness is a critical parameter in the compliant leg design as it defines the overall intrinsic adaptability of the leg, and strongly affects the control of its actuation system. The chapter presents a systematic method to optimally tune the joint elasticity of the multi-dof SEA leg based on resonance analysis and energy storage maximization criteria. The method is applied to the selection of the passive elasticity of COMAN legs. The chapter concludes with a discussion on future research directions and challenges in compliant actuation and robot design.

References

  1. 1.
    K. Hirai, Y. Hirose, Y. Haikawa, T. Takenaka, The development of Honda humanoid robot. IEEE ICRA, 1998, pp. 1321–1326Google Scholar
  2. 2.
    M. Hirose, Y. Haikawa, T. Takenaka, K. Hirai, Development of humanoid robot ASIMO. IEEE IROS workshop, 2001Google Scholar
  3. 3.
    M. Hirose, K. Ogawa, Honda humanoid robots development. Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 365, 11–19 (2007)CrossRefGoogle Scholar
  4. 4.
    K. Akachi, K. Kaneko, S. Ota, G. Miyamori, M. Mirata, S. Kajita, F. Kanehiro, Development of humanoid robot HRP-3P. IEEE-RAS International Conference on Humanoid Robots, 2005, pp. 50–55Google Scholar
  5. 5.
    K. Kaneko, K. Harada, F. Kanehiro, G. Miyamori, K. Akachi, humanoid robot HRP-3. IEEE IROS, 2008, pp. 2471–2478Google Scholar
  6. 6.
    I.W. Park, J. Lee Kim, J.H. Oh, Mechanical design of the humanoid robot platform hubo. J. Adv. Rob. 21(11), 1305–1322 (2007)CrossRefGoogle Scholar
  7. 7.
    Y. Ogura, H. Aikawa, A. Shimomura, A. Morishima, A. Takanishi, H. Lim, Development of a new humanoid robot WABIAN-2. IEEE ICRA, 2006, pp. 76–81Google Scholar
  8. 8.
    N.G. Tsagarakis, F. Becchi, L. Righetti, A. Ijspeert, D.G. Caldwell, Lower body realization of the baby humanoid iCub. IEEE IROS, 2007, pp. 3616–3622Google Scholar
  9. 9.
    N.G. Tsagarakis, Z. Li, J.A. Saglia, D.G. Caldwell, The design of the lower body of the compliant humanoid robot cCub. IEEE ICRA, 2011, pp. 2035–2040Google Scholar
  10. 10.
    N.G. Tsagarakis, G. Metta, G. Sandini, D. Vernon, R. Beira, F. Becchi, L. Righetti, J. Santos-Victor, A.J. Ijspeert, M.C. Carrozza, et al., Icub: The design and realization of an open humanoid platform for cognitive and neuroscience research. Adv. Robot. 21(10), 1151–1175 (2007)CrossRefGoogle Scholar
  11. 11.
    A. Parmiggiani, M. Maggiali, L. Natale, F. Nori, A. Schmitz, N. Tsagarakis, J.S. Victor, F. Becchi, G. Sandini, G. Metta, The design of the icub humanoid robot. Int. J. Humanoid Rob. 9(04) (2012)CrossRefGoogle Scholar
  12. 12.
    S. Lohmeier, T. Buschmann, H. Ulbrich, F. Pfeiffer, Modular joint design for performance enhanced humanoid robot lola. IEEE ICRA, 2006, pp. 88–93Google Scholar
  13. 13.
    G. Pratt, M. Williamson, Series elastic actuators. IEEE IROS, 1995, pp. 399–406Google Scholar
  14. 14.
    A. Bicchi, G. Tonietti, M. Bavaro, M. Piccigallo, Variable stiffness actuators for fast and safe motion control. Interntional Symposium Robotics Research, 2003, pp. 100–110Google Scholar
  15. 15.
    M. Laffranchi, N.G. Tsagarakis, D.G. Caldwell, Safe human robot interaction via energy regulation control. IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009. IROS, IEEE, 2009, pp. 35–41Google Scholar
  16. 16.
    M. Garabini, A. Passaglia, F.A.W. Belo, P. Salaris, A. Bicchi, Optimality principles in variable stiffness control: the VSA hammer. IEEE IROS, 2011, pp. 3770–3775Google Scholar
  17. 17.
    M. Garabini, A. Passaglia, F. Belo, P. Salaris, A. Bicchi, Optimality principles in stiffness control: the VSA kick. IEEE ICRA, 2012, pp. 3341–336Google Scholar
  18. 18.
    T.G. Sugar, A novel selective compliant actuator. Mechatronics 12(9), 1157–1171 (2002)CrossRefGoogle Scholar
  19. 19.
    J.W. Hurst, J.E. Chestnutt, A. Rizzi, An actuator with physically variable stiffness for highly dynamic legged locomotion. IEEE ICRA, pp. 4662–4667Google Scholar
  20. 20.
    G. Tonietti, R. Schiavi, A. Bicchi, Design and control of a variable stiffness actuator for safe and fast physical human/robot interaction. ICRA, 2005, pp. 526–531Google Scholar
  21. 21.
    R. Van Ham, B. Vanderborght, M. Van Damme, B. Verrelst, D. Lefeber, Maccepa, the mechanically adjustable compliance and controllable equilibrium position actuator: Design and implementation in a biped robot. Robot. Auton. Syst. 55(10), 761–768 (2007)CrossRefGoogle Scholar
  22. 22.
    S. Wolf, G. Hirzinger, A new variable stiffness design: matching requirements of the next robot generation. IEEE International Conference on Robotics and Automation, 2008, pp. 1741–1746Google Scholar
  23. 23.
    B.S. Kim, J.B. Song, Hybrid dual actuator unit: a design of a variable stiffness actuator based on an adjustable moment arm mechanism. IEEE International Conference on Robotics and Automation (ICRA), IEEE, 2010, pp. 1655–1660Google Scholar
  24. 24.
    N.G. Tsagarakis, I. Sardellitti, D.G. Caldwell, A new variable stiffness actuator (CompAct-VSA): design and modelling. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), IEEE, 2011, pp. 378–383Google Scholar
  25. 25.
    S. Wolf, O. Eiberger, G. Hirzinger, The DLR FSJ: energy based design of a variable stiffness joint. IEEE International Conference on Robotics and Automation (ICRA), IEEE, 2011, pp. 5082–5089Google Scholar
  26. 26.
    M.G. Catalano, G. Grioli, M. Garabini, F. Bonomo, M. Mancinit, N. Tsagarakis, A. Bicchi, VSA-CubeBot: a modular variable stiffness platform for multiple degrees of freedom robots. IEEE International Conference on Robotics and Automation (ICRA), IEEE, 2011, pp. 5090–5095Google Scholar
  27. 27.
    L.C. Visser, R. Carloni, S. Stramigioli, Energy-efficient variable stiffness actuators. IEEE Trans. Robot. 27(5), 865–875 (2011)CrossRefGoogle Scholar
  28. 28.
    A. Jafari, N.G. Tsagarakis, I. Sardellitti, D.G. Caldwell, How design can affect the energy required to regulate the stiffness in variable stiffness actuators. IEEE International Conference on Robotics and Automation (ICRA), IEEE, 2012, pp. 2792–2797Google Scholar
  29. 29.
    A. Jafari, N.G. Tsagarakis, I. Sardellitti, D.G. Caldwell, A new actuator with adjustable stiffness based on a variable ratio lever mechanism. IEEE/ASME Trans. Mechatron. 99, 1–9 (2012)Google Scholar
  30. 30.
    A. Jafari, N.G. Tsagarakis, D.G. Caldwell, Exploiting natural dynamics for energy minimization using an actuator with adjustable stiffness (AwAS). IEEE International Conference on Robotics and Automation (ICRA), IEEE, 2011, pp. 4632–4637Google Scholar
  31. 31.
    B. Vanderborght, N.G. Tsagarakis, R. Van Ham, I. Thorson, D.G. Caldwell, Maccepa 2.0: compliant actuator used for energy efficient hopping robot chobino1d. Auton. Robot. 31(1), 55–65 (2011)CrossRefGoogle Scholar
  32. 32.
    J. Pratt, T. Koolen, T. De Boer, J. Rebula, S. Cotton, J. Carff, M. Johnson, P. Neuhaus, Capturability-based analysis and control of legged locomotion, part 2: application to m2v2, a lower-body humanoid. Int. J. Robot. Res. 31, 1117–1133 (2012)CrossRefGoogle Scholar
  33. 33.
    F. Negrello, M. Garabini, M.G. Catalano, P. Kryczka, W. Choi, D.G. Caldwell, A. Bicchi, N.G. Tsagarakis, Walk-man humanoid lower body design optimization for enhanced physical performance. IEEE international conference on robotics and automation (ICRA), IEEE, 2016, pp. 1817–1824Google Scholar
  34. 34.
    N.G. Tsagarakis et al, Walk-man: a high performance humanoid platform for realistic environments (2017)CrossRefGoogle Scholar
  35. 35.
    N.G. Tsagarakis, S. Morfey, G. Medrano Cerda, Z. Li, D.G. Caldwell, Compliant humanoid coman: optimal joint stiffness tuning for modal frequency control. IEEE International Conference on Robotics and Automation (ICRA), IEEE, 2013, pp. 673–678Google Scholar
  36. 36.
    N.G. Tsagarakis, Z. Li, J. Saglia, D.G. Caldwell, The design of the lower body of the compliant humanoid robot cCub. IEEE International Conference on Robotics and Automation (ICRA), 2011, pp. 2035–2040Google Scholar
  37. 37.
    N.G. Tsagarakis, M. Laffranchi, B. Vanderborght, D.G. Caldwell, A Compact soft actuator for small scale robotic systems. IEEE ICRA, 2009, pp. 4356–4362Google Scholar
  38. 38.
    J. Hurst, The electric cable differential leg: A novel design approach for walking and running. J. Humanoid Rob. 8(2), 301–321 (2011)CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  • Nikos G. Tsagarakis
    • 1
  • Gustavo Medrano Cerda
    • 2
  • Darwin G. Caldwell
    • 2
  1. 1.Istituto Italiano di Tecnologia (IIT-Genova)Humanoids & Human Centred MechatronicsGenoaItaly
  2. 2.Istituto Italiano di Tecnologia (IIT-Genova)Advanced RoboticsGenovaItaly

Personalised recommendations